Instruction/ maintenance manual of the product M5560 3M
Go to page of 8
Instructions for Use f or M 5560 Directives d’utilisation du modèle M5560 Instrucciones para uso del M 5560 Instruções de Uso - Modelo 5560 4/03 Halogen Curing Light Lampe de photopolymérisation.
T ABLE OF CONTENTS Pag e Safety Inf ormation ............................................................................................................ 3 Diagram of Light ..............................................................................
3 8. Main Switch and Indicator Light 6. P ower Module 2. Handpiece push button 3. Nose Cone 5. Eyeshield 4. Light Guide 7. P ower Cor d Read and understand all safety inf ormation before operating Glossary of Symbols Attention, Consult Accompanying Documents Alternating Current.
Intended Use: The Elipar 2500, manuf actured for 3M ESPE, is a high intensity source of blue light (400-500 nm) designed and tested for polymerizing visib le light-cure dental mater ials such as Z100™ Restorativ e, Single Bond and Vitremer™ Core Buildup/Restorative , manufactured b y 3M ESPE.
Operation: 1. Press the power (green) s witch on the side of the base unit to the “I” position. The green indicator light will glow , and the unit is now ready f or use. 2. Rotate the nose cone to optimize the position of the light guide and hold the light guide no fur ther than 2 mm from the dental material.
Bulb Replacement 1. Remove the nose cone b y placing the thumb on a textured snap-in tab located between two slits and the f orefinger on the other textured snap-in tab located betw een two slits. Gently squeeze the tabs while pulling downw ard at an angle to separate the nose cone from the handpiece.
Tr oubleshooting: Condition Remedy Main indicator light inoperativ e 1. Check electrical supply . 2. Send unit to an authorized service center. Curing bulb inoperativ e 1. Replace bulb . 2. Send unit to an authorized service center. No time signal tone 1.
Light Source: - 75 watt tungsten/halogen b ulb. A verage lif e 4000 cycles at 20 seconds each. - Optically filtered light output for peak po wer in 400-500 nm band.
An important point after buying a device 3M M5560 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M M5560 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M M5560 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M M5560 you will learn all the available features of the product, as well as information on its operation. The information that you get 3M M5560 will certainly help you make a decision on the purchase.
If you already are a holder of 3M M5560, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M M5560.
However, one of the most important roles played by the user manual is to help in solving problems with 3M M5560. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M M5560 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
