Instruction/ maintenance manual of the product C2400M-B Pelco
Go to page of 8
INST ALLA TION HD35/HD3515 Series Heater and Defroster Kit C2400M-B (1/06).
2 C2400M-B (1/06) Important Safety Instructions Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Do not use this apparatus near water.
C2400M-B (1/06) 3 Description Heater and defroster kits in the HD35/HD3515 Series are designed for enclosures in the EH3500 Series and EH3515L Legacy ® Series. The HD35 heater and defroster kit is designed for enclosures only in the EH3508 Series and EH3512 Series.
4 C2400M-B (1/06) Installation The following items are supplied: 1 Heater and defroster attached to the front heater bracket 1 Heater attached to the rear heater bracket (HD3515 Series and HD3515L Ser.
C2400M-B (1/06) 5 Figure 1. Heater and Defroster Kit Installation 7. If you are installing the HD3515 heater and defroster kit, perform the following steps: a. If a blower was previously installed in the enclosure, remove the blower now . b. Place the rear heater bracket (with attached heater) at the rear of the enclosure (refer to Figure 1).
6 C2400M-B (1/06) 9. Route the heater and defroster wires from the front of the enclosure so they will be underneath the camera sled or between the track rail and body of the enclosure.
C2400M-B (1/06) 7 11. Reinstall the camera and sled. WARNING: If the wiring is routed underneath the camera sled, be sure you do not bind the wiring when reinstalling the camera sled and camera. 12. Close the enclosure lid, and latch. 13. Reconnect power to the enclosure.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
An important point after buying a device Pelco C2400M-B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco C2400M-B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco C2400M-B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco C2400M-B you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco C2400M-B will certainly help you make a decision on the purchase.
If you already are a holder of Pelco C2400M-B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco C2400M-B.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco C2400M-B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco C2400M-B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
