Instruction/ maintenance manual of the product 2800 Patton electronic
Go to page of 8
IPLink™ 2800 Series VPN Routers Quick Start Guide Document Number: 13220U7-001 Rev . D Part Number: 07M2800-QS Revised: March 31, 2006 Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.com WWW: www .patton.
2 IPLink 2800 Quick Start Guide 1.0 Powering up the IPLink Y our IPLink comes with one of the following power supply options and power accessories: • External AC (desktop) adaptors—power cord and .
IPLink 2800 Quick Start Guide 3 1.3 Models with internal DC power supply 1. Strip insulation 1/4-inch from the wires connecting the power source to the IPLink. 2. Connect the ground terminal from the power source with to the E terminal on the IPLink. 3.
4 IPLink 2800 Quick Start Guide 3. Open a T elnet connection to the default LAN IP address of the IPLink ( 192.168.1.1 ). Use the name administrator after the login prompt and simply press the Enter key after the password prompt.
IPLink 2800 Quick Start Guide 5 3.0 Connecting to the network Connect the IPLink to the IP network (see figure 2 ) and do any remaining configuration from a PC connected to the same Ethernet segment. Figure 2. Connecting to a host Y ou can check the connection with the ping command.
6 IPLink 2800 Quick Start Guide Note The router’ s V .35 interface is wired as a DCE. No DTE configuration is possible. If you are directly con- necting the router’ s V .35 interface to third-party equipment that cannot be configured as a DTE, you must use a tail-circuit cable.
IPLink 2800 Quick Start Guide 7 6.0 EC Declaration of Conformity Product Description: IPLink 2802, IPLink 2803, IPLink 2805, IPLink 2821, IPLink 2823, and IPLink 2835.
8 IPLink 2800 Quick Start Guide Copyright statement Copyright © 2005–2006, Patton Electronics Company . All rights reser ved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document.
An important point after buying a device Patton electronic 2800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 2800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 2800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 2800 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 2800 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 2800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 2800.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 2800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 2800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
