Instruction/ maintenance manual of the product 2156 Patton electronic
Go to page of 20
USER MANUAL MODELS 2156 & 2157 CopperLink Ethernet Extender s SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M2156_2157 Doc# 032131U Rev .
2 CONTENTS 1.0 Warranty Information ................................................................. 3 1.1 Radio and TV Interference ............................................................ 3 1.2 CE Notice ........................................
3 1.0 W ARRANTY INFORMATION P atton Electronics warrants all Model 2156 or 2157 components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the shipment.
4 1.3 FCC PART 68 1. Y ou are required to request service from the telephone company bef ore you connect the Model 2156 or 2157 to a netw ork. When you request ser vice , y ou must pro vide the telephone compan y with the f ollo wing data.
5 1.4 INDUSTRY CANADA NOTICE NO TICE: This equipment meets the applicable Industry Canada T ermi- nal Equipment T echnical Specifications. This is confirmed by the registr a- tion number .
6 2.0 GENERAL INFORMATION Thank you purchasing this P atton Electronics product. This product has been thoroughly inspected and tested and is warranted f or one y ear for par ts and labor . If questions ar ise while installing or using this product, contact T echnical Support at +1 (301) 975-1007 .
7 Figure 1. T ypical application The 2157/L and 2157/R work together to create a transparent e xtension between two peered Ethernet LANs. Figure 1 shows a typical point-to- point application.
8 3.0 INSTALLATION Because the CopperLink Ethernet Extenders require no configuration, they can be installed quickly . Installation consists of the f ollo wing: • Connect the line interf ace between the units (refer to section 3.
9 F ollow the steps below to connect the CopperLink interf aces. Note The Model 2156 or 2157 units work in pairs. One of the units must be a Model 2156/L (local) or 2157/L, and the other unit must be a Model 2156/R (remote) or 2157/R.
10 Figure 4. CopperLink Ethernet Extender 10/100Base-T RJ-45 Connector Pinout. Connecting the 10/100Base-T Ethernet P ort to a Hub or PC The Models 2156 and 2157 are equipped with an MDI-X s witch tha.
11 Figure 7. MDI-X switch pressed in perf orms 10/100Base-T crossover function 3.3 CONNECTING POWER An e xter nal A C or DC power supply is a vailab le separately . This connec- tion is made via the barrel jack on the rear panel of the Models 2156 and 2157.
12 External 48 VDC power supply • Input – Rated voltage: 36–60 VDC – Rated current: 0.25 A DC at nominal 48 VDC – 3-pin locking connector , 3.
13 3.5 CONSOLE PORT The Console P or t is only intended f or use by P atton Electronics T echnical Suppor t technicians..
14 4.0 OPERATION Once the CopperLink Ethernet Extenders are proper ly installed, the y should operate transparently . No user settings required. This section describes reading the LED status monitors.
15 APPENDIX A SPECIFICATIONS A.1 GENERAL CHARACTERISTICS • Compact low cost plug-and-pla y router • 10/100 Ethernet • Unlimited host suppor t • Eight front panel LEDs indicate P o wer , W AN, .
16 A.4 EXTENSION DISTANCE AND RATE • 2.3 Mbps (Model 2156) or 4.6 Mbps speed (Model 2157) • Distances up to 30,000 ft (9,144 m) on 24 A WG (0.4 mm) wire • A uto-adjusting rate picks best rate f or a giv en extension distance (see tables belo w) T able 2: Model 2156 Extension Distances DSL line rate No Noise 26g (0.
17 A.5 LED INDICATORS • Eight LED indicators •P o w e r • W AN Link, T ransmit, and Receiv e • Ethernet Link, 100M, T ransmit, and Receive A.6 POWER AND POWER SUPPLY SPECIFICATIONS • Either A C or DC options are av ailable • Connection to the CopperLink Ethernet Extender requires +5VDC ±5% DC power (1.
18 APPENDIX B MODELS 2156 AND 2157 SERIES F ACTOR Y REPLACEMENT P AR TS AND ACCESSORIES *Only required with optional UI power supply (08055DCUI) P atton Model # Description 2156 Base Models 2156/L Cop.
19 APPENDIX C MODELS 2156 AND 2157 SERIES INTERFACE PIN ASSIGNMENT C.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection C.
20 Notes ________________________________________________________ ________________________________________________________ ________________________________________________________ ____________________.
An important point after buying a device Patton electronic 2156 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 2156 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 2156 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 2156 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 2156 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 2156, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 2156.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 2156. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 2156 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
