Instruction/ maintenance manual of the product 1185 Patton electronic
Go to page of 12
USER MANU AL MODEL 1184 & MODEL 1185 Kilolight ™ Single Fiber Modems SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.
T ABLE OF CONTENTS Section Page 1.0 W arranty Information .............................................................2 1.1 Radio and TV Interference 1.2 CE Notice 1.3 Service 2.0 General Information ..................................................
1.3 SERVICE All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container . This number may be obtained from Patton Electronics T echnical Service at (301) 975-1007 , at our web site at http://www .
Switch S1-1 through S1-4 (Model 1 184 :): Async/Sync Data Rate On Model 1 184 Switches S1-1, S1-2, S1-3 and S1-4 set two parameters: synchronous or asynchronous data rate and the maximum transmission distance between two Model 1 184s. Data Max. Distance S1-1 S1-2 S1-3 S1-4 Rate (kbps) in miles (km) On Off Off On 0-19.
Switch S1-1 through S1-4 (Model 1 185) : Async/Sync Data Rate On Model 1 185 Switches S1-1, S1-2, S1-3 and S1-4 set two parameters: synchronous or asynchronous data rate and the maximum transmission distance between two Model 1 185s. Data Max Distance S1-1 S1-2 S1-3 S1-4 Rate (kbps) in miles (km) On Off Off On 0-19.
4.0 INST ALLA TION Once the Model 1 184 or 1 185 is properly configured, it is ready to connect to the fiber interface, to the serial port, and to the power source.
Installing the New QuickConnect™ Module 1) Make sure the power switch is off. Leave the power cord plugged into a grounded outlet to keep the unit grounded. 2) Hold the module with the faceplate toward you and align the module with the guide slots in the rear panel of the Model 1 184/1 185.
5.0 OPERA TION Once the 1 184 or 1 185 is properly configured and installed, it should operate transparently . This sections describes power-up, reading the LED status monitors, and using the built-in loopback tests . 5.1 POWER-UP T o apply power to the Model 1 184/1 185, first be sure that you have read Section 4.
5.3 DIAGNOSTICS Model 1 184 and 1 185 are equipped with V .54 diagnostics that may be used to to evaluate the condition of the local and remote units, as well as the twisted pair link between them: local loopback (LAL) and remote digital loopback (DL).
APPENDIX A SPECIFICA TIONS T ransmission: Asynchronous and Synchronous Clocking: Internal, external or derived from receive signal Distance: 3 miles maximum (4.8km) 1 184 Data Rates: Asynchronous: 0 to 19.2 kbps Synchronous: 4.8, 9.6, 14.4, 19.2, 28.8, 32.
APPENDIX C V .35 Interface Pin Description M/34 Female Connector Pin # Signal B SGND (Signal Ground) C RTS (Request to Send) D CTS (Clear to Send) E DSR (Data Set Ready) F CD (Carrier Detect) H DTR (D.
APPENDIX C (cont) X.21 Interface Pin Description (DB-15 Female Connector) Pin # Signal 1 . . . . . . . . . . . . Frame Ground 2 . . . . . . . . . . . . T (T ransmit Data-A) 3 . . . . . . . . . . . . C (Control-A) 4 . . . . . . . . . . . . R (Receive Data-A) 5 .
An important point after buying a device Patton electronic 1185 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 1185 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 1185 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 1185 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 1185 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 1185, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 1185.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 1185. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 1185 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
