Instruction/ maintenance manual of the product 1170M SERIES Patton electronic
Go to page of 16
USER MANUAL MODEL 1170M SERIES Ethernet Fiber Modems (1170M, 1171M, 1172M) SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M1170M Doc# 077351U Rev .
2 CONTENTS 1.0 Warranty Information ................................................................. 3 1.1 Radio and TV Interference ............................................................ 3 1.2 CE Notice ........................................
3 1.0 W ARRANTY INFORMATION P atton Electr onics warrants all Model 1170M Series components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of shipment.
4 and the Low V oltage Directiv e (L VD) of the Union European (EU). A Cer- tificate of Compliance is av ailable by contacting T echnical Support. 1.3 SERVICE All warranty and nonw arranty repairs must be retur ned freight prepaid and insured to P atton Electronics.
5 2.0 GENERAL INFORMATION Thank you f or your purchase of this P atton Electronics product. It has been thoroughly inspected and tested and is warranted f or one year f or par ts and labor . If you hav e an y questions about this product, please call P atton Electronics T echnical Suppor t at (301) 975-1007.
6 2.2 DESCRIPTION There are three base models in the P atton Model 1170M Ser ies of stan- dards compliant Ethernet Fiber Modems (see T able 1) that conv er t and e xtend the reach of copper Ethernet over multi-mode fiber . • The Model 1170M conv er ts 100Base-TX to 100Base-FX and extends up to 1.
7 from 10Base-T/10Base-FL to 100Base-TX/100Base-FX, which elimi- nates the need to upgrade and lo wers the o ver all cost of ownership. All P atton 1170M Ser ies models are packaged in an ultra-miniature MicroP ak chassis and feature pow er , fiber link and activity , and twisted- pair link and activity LED indicators.
8 3.0 INSTALLATION The f ollowing sections describe installing and configuring the Model 1170M Series of Ether net Fiber Modems 3.1 INSTALLING A FIBER MODEM Do the f ollowing to install the Model 1170M Series of Ethernet Fiber Modems: 1.
9 2. The Fiber Modem comes equipped with a shielded RJ-45 J ack f or Ethernet connections (see Figure 1 on page 8). Connect the Ethernet RJ-45 jack to the appropriate 802.3 compliant network equipment via a standard network patch cable (not pro- vided).
10 3. Connect the dual fiber ST or SC connectors on the Fiber Modem (see Figure 3) directly to the 802.3 compliant multi-mode fiber cable equipped with male ST or SC connectors or via 802.3 compliant multi-mode fiber patch cord (not provided) and corresponding ST or SC fiber wall jac ks.
11 3.2 END-TO-END CONNECTION Figure 4 shows an end-to-end connection between a personal computer/ terminal and Ether net hub using two P atton Model 1170M Series Ether- net Fiber Modems and a multi-mode fiber connection.
12 4.0 OPERATION Once you ha ve installed the Model 1170M Series unit and hav e con- nected the External Po wer Supply Adapter to the appropr iate pow er source, the unit will po wer up automatically and is ready to operate .
13 The LED indicators reflect the f ollowing operating status: T able 2: LED indicator descriptions Number Name Description 1 P W R Illuminates green to shown that po wer is applied to unit. 2 FO100 Illuminates green to show that a 100 Mbps signal is present on the fiber optic side of the unit.
14 APPENDIX A SPECIFICATIONS A.1 INTERFACES/CONNECTORS • T wisted-Pair/Copper Ethernet: Shielded RJ-45 Jack • Fiber Optic Ethernet: Dual ST or SC Connectors A.2 INTERFACE SPEED • 1170M: 100 Mbps • 1171M: 10 Mbps • 1172M: Auto-Negotiating 10 or 100 Mbps A.
15 A.7 FIBER OPTIC LINK BUDGET T ransmit po wer • 1170M: -16.8 dBm (typical) • 1171M: -12 dBm (typical) • 1172M: -16.8 dBm (typical) Receiver Sensitivity • 1170M: -33.
16 A.10 COMPLIANCE • Saf ety & EMC: P atton Internal Safety & EMC T esting, FCC P ar t 15 Class A • T elecom—CE Mar k per EMC directive 89/336/EEC and Lo w V oltage Directive 73/23/EEC A.
An important point after buying a device Patton electronic 1170M SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 1170M SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 1170M SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 1170M SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 1170M SERIES will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 1170M SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 1170M SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 1170M SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 1170M SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
