Instruction/ maintenance manual of the product 1110ARC Patton electronic
Go to page of 8
USER MANUAL MODEL 1110ARC Asynchronous, RS-232 Fiber Optic Rack Card Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http:www .patton.com Part #07M1 1 10ARC-A Doc #018022UA Revised 3/16/98 An ISO-9001 Certified Company Dear Valued Customer, Thank you for purchasing Patton Electronics products! We do appreciate your business.
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1 1 10ARC components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
3.0 CONFIGURA TION This setting describes the location and orientation of the Model 1 1 10ARC’s configuration jumpers. There are two sets of jumpers to set: those on the front “brains” card and those on the rear “interface” card.
3.2 REAR CARD SETTINGS The Model 1 1 10ARC is compatible with two dual-fiber interface cards, one with dual ST connectors and one with dual SMA connectors. Both cards use an HD-26 female for the RS-232 interface. The jumpers on both interface cards function identically .
4.0 INST ALLA TION This section describes the functions of the Model 1000R16 rack chassis, tells how to install front and rear Model 1 1 10ARC cards into the chassis, and provides instructions for connecting the interface cables.
4.3.1 RS-232 CONNECTION The RS-232 port on the rear card of the Model 1 1 10ARC is wired as a DCE, and uses a female HD-26 connector . The HD-26 is an alternate connector according to the EIA RS-232E specification, and the pin-out is the same as a standard DB-25.
APPENDIX A P A TTON MODEL 1 1 1OARC SPECIFICA TIONS T ransmission Line: Dual optical cable T ransmission Mode: Asynchronous, half or full duplex, point-to- point Interfaces: EIA RS-232, CCITT V .24 Data Rates: 0 - 19.2 Kbps Distance: 4 miles over continuous fiber RTS/CTS Delay: Switch-selectable: No delay , 9.
APPENDIX C P A TTON MODEL 1 1 10ARC BLOCK DIAGRAM Copyright © 1998 Patton Electronics Company All Rights Reserved APPENDIX C P A TTON MODEL 1 1 10ARC PIN CONFIGURA TIONS 13 14 8- (CD) Carrier Detect .
An important point after buying a device Patton electronic 1110ARC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 1110ARC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 1110ARC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 1110ARC you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 1110ARC will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 1110ARC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 1110ARC.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 1110ARC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 1110ARC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
