Instruction/ maintenance manual of the product 1110 Patton electronic
Go to page of 6
USER MANUAL MODEL 1110 Asynchronous, Carrier Controlled Fiber Optic Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 07M1 1 10-C Doc # 01801 1UC Revised 9/26/96.
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1 1 10 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
3.0 CONFIGURA TION The Model 1 1 10 is simple to install and is ruggedly designed for excellent reliability: just set it and forget it. This section will describe how to configure the Model 1 1 10’s DCE/DTE switch and how to set the internal DIP switches.
Switches 2 & 3: RTS/CTS Delay The settings for Switches 2 & 3 determine whether the RTS/CTS delay will be 0 mS, 79.5 mS or 9.5 mS. *Factory Default Switch 4: Enable Carrier Detect LED The setting for Switch 4 determines whether the Model 1 1 10 “carrier detect” LED indicator is enabled .
5.0 OPERA TION Once you have configured each Model 1 1 10 properly and connected the fiber and RS-232 cables, you are ready to operate the units. This section describes the LED status monitors and the power up process.
APPENDIX B PIN CONFIGURA TIONS APPENDIX C BLOCK DIAGRAM 9 10 1- (FG) Frame Ground 2- (TD) T ransmit Data T o Model 1 1 10 3- (RD) Receive Data From Model 1 1 10 4- (RTS) Request to Send T o Model 1 1 .
An important point after buying a device Patton electronic 1110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 1110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 1110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 1110 you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 1110 will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 1110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 1110.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 1110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 1110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
