Instruction/ maintenance manual of the product 1018RC Patton electronic
Go to page of 12
USER MANUAL MODEL 1018RC Powered High Speed Short Range Modem: Rack Mount Card SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .
1.3 SERVICE All warranty and nonwarranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container . This number may be obtained from Patton Electronics T echnical Support: (301) 975-1007 ; http://www .
3.0 CONFIGURA TION This section describes the location and orientation of the Model 1018RC’s configuration switches and jumpers, and provides detailed instructions for all possible settings. The Model 1018RC uses a combination of DIP switches and jumpers that allow configuration to an extremely wide range of applications.
S1-3 through S1-6: Not Used S1-7 and S1-8: RTS/CTS Delay The combined settings for switches S1-7 and S1-8 determine the amount of delay between the time the Model 1018RC “sees” RTS and when it sends CTS. Currently , the Model 1018RC does not have optional delay settings.
S2-8: Microprocessor Reset The setting for switch S2-8 determines whether the Model 1018RC’s microprocessor is in normal operating mode or “reset” mode. This switch is used primarily for factory test purposes, since removing the card from the chassis resets the microprocessor automatically .
Figure 8 (below) provides an overview of interface jumper functions for the rear interface cards. Following this overview is a detailed description of each jumper ’s function.
Switching the Power Supply On and Off The power supply on/off switch is located on the front panel. When plugged in and switched on, a red front panel LED will glow . Since the Model 1000R16 is a “hot swappable” rack, it is not necessary for any cards to be installed before switching on the power supply .
Point-to-Point T wisted Pair Connection The 6-position RJ-1 1 and 8-position RJ-45 jack options for the Model 1018RC are prewired for a standard TELCO wiring environment. Connection of a 2-wire or 4-wire twisted pair circuit between two or more Model 1018RCs requires a crossover cable as shown in the following diagrams.
4. If the BER test indicates no errors are present, move the V .52 toggle switch to the right, thus activating the “51 1/E” test with periodic errors.
APPENDIX A P A TTON MODEL 1018 RC SPECIFICA TIONS T ransmission Format: Asynchronous to terminals; synchronous between units Internal Interface: Connection to Model 1000R16 rack chassis via male card .
APPENDIX C P A TTON MODEL 1018RC F ACTOR Y REPLACEMENT P ARTS The Patton Model 1018RC rack system features interchangeable rear cards, power cords/fuses for international various operating environments and other user-replaceable parts. Model numbers, descriptions and prices for these parts are listed below .
APPENDIX D P A TTON MODEL 1018RC INTERF ACE ST ANDARDS Copyright © Patton Electronics Company All Rights Reserve 21 1- (FG) Frame Ground 2- (TD) T ransmit Data T o 1018RC 3- (RD) Receive Data From 10.
An important point after buying a device Patton electronic 1018RC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Patton electronic 1018RC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Patton electronic 1018RC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Patton electronic 1018RC you will learn all the available features of the product, as well as information on its operation. The information that you get Patton electronic 1018RC will certainly help you make a decision on the purchase.
If you already are a holder of Patton electronic 1018RC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Patton electronic 1018RC.
However, one of the most important roles played by the user manual is to help in solving problems with Patton electronic 1018RC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Patton electronic 1018RC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
