Instruction/ maintenance manual of the product AW-PS300 Panasonic
Go to page of 11
AC Adapter A W -PS300 Before attempting to connect or operate this product, please read these instructions completely. .
Warning: Do not install this product near any object that burns easily. In case of using a halogen lamp, installation of it near such an object could cause a fire due to the heat generated by the lamp.
CONTENTS FEATURES ................................................................................................................................................................................... 1 PRECAUTIONS .......................................
-2- • Handle the adaptor with care. Dropping the control panel or subjecting it to a strong shock can cause a failure or an accident. • Operating temperature range –10°C to +45°C Avoid using it in a cold place below –10°C or a hot place above +45°C because low or high temperature will adversely affect the parts inside.
-3- MAJOR OPERA TING CONTROLS AND THEIR FUNCTIONS ■ FRONT P ANEL q Power Switch (POWER, ON/OFF) Power is switched on to supply power to the pan/tilt head when this switch is pressed to the ON position (POWER Indicator lights), and is switched off when the switch is pressed to the OFF position.
-4- t AC 120V Inlet [AC IN](AC 3P Inlet) Connect the supplied AC cable. y Option Switch Terminal (OPTION SW CONTROL OUT) (2P Terminal Board) A relay switch capable of controlling the contact to short or open from a Control Panel (AW-RP301, AW- RP305, AW-RP501, or AW-RP505).
-5- i Lamp Control Input Terminals (LAMP CONTROL C/S) (2P Terminal Board) Connect it to LAMP CONTROL C/S Terminals on the pan/tilt head when controlling the halogen lamp con- nected to LAMP AC OUT Connector !0 to switch it on and off, using a cable (to be locally purchased) with a nominal cross section of 0.
-6- • Switch off all the devices before making any connec- tion. • Use the Pan/tilt Head AW-PH300. • Connect the DC 15V OUT Terminals [+] and [–] on this adapter to the DC 15V IN Terminals [+] and [–] on the Pan/tilt Head (AW-PH300) respectively with cables (to be locally purchased) with a nominal cross section of 1.
-7- • For a detailed description of con- necting the individual devices, refer to their Operating Instructions. • Connect the supplied AC cable to the AC 120V inlet. Plug the AC cable to an AC outlet, and press the power switch on the adapter to the ON position.
-8- SPECIFICA TIONS Source Voltage: 120 V AC 60 Hz Input Capacity: 552W Power Output: DC 15V OUT: DC15V 2.5A, with over-current protect circuit LAMP AC OUT: 120V AC, max.
N1197-0 7J1A110A Printed in Japan Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 2E-6, Secaucus, NJ 07094 Regiona.
An important point after buying a device Panasonic AW-PS300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Panasonic AW-PS300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Panasonic AW-PS300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Panasonic AW-PS300 you will learn all the available features of the product, as well as information on its operation. The information that you get Panasonic AW-PS300 will certainly help you make a decision on the purchase.
If you already are a holder of Panasonic AW-PS300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Panasonic AW-PS300.
However, one of the most important roles played by the user manual is to help in solving problems with Panasonic AW-PS300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Panasonic AW-PS300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
