Instruction/ maintenance manual of the product BWR102 Oregon Scientific
Go to page of 11
1 GB BMI BODY WEIGHT MONITOR MODEL : BWR102 USER’S MANUAL ADJUST THE SETTING OF THE REMOTE DISPLA Y UNIT 1 . enter the setting mode. 2 . set the display format. 3 . set the hour . 4 . set the minute. 5 . set the year . 6 . set the date-month format.
2 GB 9 . set the format of the measurement unit. ACQUIRE WEIGHT FROM SCALE 1 . select the display unit on scale. 2 . step on the scale. 3 . stand still till reading come out. Note: Beep sound to indicate end of measurement. 4 . step off the scale. Note: Repeat step 2 - 3 for next measurement.
3 GB STORE WEIGHT TO REMOTE DISPLA Y UNIT 1 . take measurement from scale. 2 . activate receiving mode. Note: Beep sound to indicate the activation of receiving mode. Receiving function will be activated for 30 sec. 3 . weight received from scale. Note: Beep sound to indicate signal is being received from the scale.
4 GB USER SETTING / MEMOR Y RECALL FROM THE REMOTE DISPLA Y UNIT 1 a. select the user . Note: If the height is not set, there will not have height displayed.
5 GB TIPS A . install the batteries to the unit. B. when battery is first installed on both scale and remote display unit. B-1. acquire weight on scale. B-2. match the remote display unit with the scale. Note: a) beep sound to indicate the matching is activated.
6 GB WHA T IS BODY MASS INDEX (BMI) ? Body Mass index (BMI) is a measurement of your body height to weight ratio. BMI is the most widely used an international standard for evaluating obesity . It is expressed as your body weight in kilograms divided by the square of your body height in meters.
7 GB TROUBLE SHOOTING Symptom Description Action 1 . incorrect use or weight step off the scale first and measured is not stable. repeat the measurement. 2 . scale overloaded. be sure no excessive mass is put on scale and then repeat the measurement. 3 .
8 GB I . do not load the scale when not in use J. avoid from wet K . avoid from abrasive or corrosive cleaning agent EC-DECLARA TION OF CONFORMITY This product contains the approved transmitter module.
9 GB Légende: - Key Appuyer - Key Appuyer et maintenir appuyer - Clignotant F Key key Legend: ```` - P re s s - Press and hold - Flashing GB Key key Legenda: - Pressione - Pressione e segure - Interm.
10 GB NOTE FOR THE USER · Please read the manual carefully before use. · The scale will calibrate automatically to provide accurate measurement when the scale is placed on the ground. Message: , will be displayed on the scale to indicate the calibration is in process.
11 GB.
An important point after buying a device Oregon Scientific BWR102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Oregon Scientific BWR102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Oregon Scientific BWR102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Oregon Scientific BWR102 you will learn all the available features of the product, as well as information on its operation. The information that you get Oregon Scientific BWR102 will certainly help you make a decision on the purchase.
If you already are a holder of Oregon Scientific BWR102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Oregon Scientific BWR102.
However, one of the most important roles played by the user manual is to help in solving problems with Oregon Scientific BWR102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Oregon Scientific BWR102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
