Instruction/ maintenance manual of the product CI-365 NuTone
Go to page of 4
READ INSTRUCTIONS BEFORE INSTALLATION IMPORTANT NOTES: 1. For maximum clearance under cabinets use 2 1 / 2 " X 3 1 / 2 " short 90° elbow. 2. Check for an air tight seal at VacPan™ and elbow prior to installation. 3. If required, use Teflon tape to make air tight seal but do not use glue.
INST ALLA TION OPTION #1 - UNDER CABINET ACCESS TO PIPING FROM BELOW Refer to Figure 2 1. Select a location under cabinet for VacPan™ (6) so that new fittings can be connected to existing pipe. Drill small reference hole under location of VacPan™ to determine position in basement or crawl space.
INST ALLA TION OPTION #2 - IN W ALLS ALONG BASE BOARDS Refer to Figure 3 (ACCESS TO PIPING FROM BELOW) 1. Locate studs (1) in the wall at the location VacPan™ will be installed. 2. VacPan™ should be located tight to one side in stud space. 3. Drill a small reference hole (2) through the floor under area of VacPan™.
INST ALLA TION NEW HOME CONSTRUCTION Refer to Figure 5 1. Cut out wall plate (9) between two studs at the location of VacPan™. Cut a 6 3/4" piece of wall plate and refasten to floo r temporary rough-in block.
An important point after buying a device NuTone CI-365 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NuTone CI-365 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NuTone CI-365 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NuTone CI-365 you will learn all the available features of the product, as well as information on its operation. The information that you get NuTone CI-365 will certainly help you make a decision on the purchase.
If you already are a holder of NuTone CI-365, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NuTone CI-365.
However, one of the most important roles played by the user manual is to help in solving problems with NuTone CI-365. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NuTone CI-365 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
