Instruction/ maintenance manual of the product GM-14915118 Novatel
Go to page of 12
1 MEMS Interface Card GM-149151 18 Rev 4 December 2013 QUICK ST ART GUIDE This guide provides the basic infor mation needed to set up and use your new NovAtel ® MEMS Interface Card (MIC). For more detailed information on the installation and oper ation of your MIC, download the SP AN on OEM6 User Man ual from our web site at www .
2 IMU SETUP S Figure 1: MIC to OEM-IMU-ADIS-1 6488 (OEM Cable Kit: 01 019007) Figure 2: MIC to OEM-IMU-HG17 00 (OEM Cable Kit: 01018868) Figure 3: MIC to OEM-IMU-HG19 00 (OEM Cable Kit: 01018871) Figu.
3 Figure 5: MIC to OEM-IMU-STIM300 (OEM Cable Kit: 010191 74) INST ALL THE MIC IN A ST ACK UP CONFIGURATION In a stack up config uration, the MIC is co nnec ted directly to an OEM615 receiver . Power and communications connectio ns to the receiver are made through the MIC.
4 Complete the following step s to connect and power your MIC and OEM615. 1. Attach the IMU mounting PCB to the IMU. Ensure all the pins on the header are aligne d with the holes on the mating connecto r . 2. Mount the IMU an d antenna secu rely to a vehicle.
5 4. Connect the antenna cable to th e antenna jack (J1 01) on the OEM615. The antenna ca ble must have a right a ngle MCX conn ector on the end th at connects to the OEM615. 5. Align the OEM615 mating connector (J301) on the MIC with the 20-pin header (P1 101) on the OEM615.
6 INST ALL THE MIC IN A ST ANDALONE CONFIGURATION In a standalone con figuration, the MIC and OEM6 receiver are mounte d separate ly . Ref Connector Part Number Mating Connector Description 1 P101 436.
7 Complete the following step s to connect and powe r your MIC. 1. Attach the IMU mounting PCB to the IMU. Ensure all the pins on the header are aligned with the holes on the mating connecto r .
8 8. Using a customer supplied wiring ha rness, connect a power supply to the OEM6 family receiver . See the OEM6 Family Installation and Operation User Manual for information about connecting power to an OEM6 family receiver . 9. Using a customer supplied wiring ha rness, connect the MIC serial port to a serial port on the OEM6 receiver .
9 CONFIGURE THE SP AN ® SYSTEM Follow these steps to enable INS as par t of the SP AN system using sof tware commands: 1. Establish a connection to the OEM6 receiver . Refer to the rec eiver Quick S t art Guide for informat ion about connecting to the receiver and entering commands.
10 3. Enter the distance from the IMU to the GNSS antenna using the SETIMUTOANT OFFSET command. The X (pitch), Y (roll) and Z (azimuth) d irections are clearly marked on the IMU enclosure.
11 OPERATE THE SP AN SYSTEM The system is ready to go once it is powered and th e INS and GNSS are configured using the pr eviously shown comm ands. Observe th e status of the sy stem in the NovAtel Connect INS Window or in the status field of any of the INS solution logs (for example INSPOS, INSVEL, INSA TT and INSPV A).
12 POST-PROCESS DATA Post-processing re quires collection of simulta neous dat a from the base and rover stations. This includes accurate co ordinates o f the base station and ac cura te measurement of the IM U to antenna separation.
An important point after buying a device Novatel GM-14915118 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Novatel GM-14915118 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Novatel GM-14915118 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Novatel GM-14915118 you will learn all the available features of the product, as well as information on its operation. The information that you get Novatel GM-14915118 will certainly help you make a decision on the purchase.
If you already are a holder of Novatel GM-14915118, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Novatel GM-14915118.
However, one of the most important roles played by the user manual is to help in solving problems with Novatel GM-14915118. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Novatel GM-14915118 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
