Instruction/ maintenance manual of the product NDA-24233 NEC
Go to page of 124
NDA-242 33 ISSU E 2 STOCK # 02 93886 Engineering Guide JANUARY, 19 99 NEC America, Inc . VisuaLink 128/384.
LIABILITY DISCLAIMER NEC Amer ica, Inc. reserves the righ t to change th e specif ications, function s, or fea tures, at any time, without noti ce. NEC Amer ica, Inc . has prep ar ed thi s docum ent for use by i ts em- ployees and cus tomers. The inf ormation conta ined her ein is t he property o f NEC Ameri ca, Inc.
EXHIBIT J1 FCC REQUIREMENTS NEC Am e r i ca, Inc . V isuaLink 12 8/V isuaLink 3 84 TYPE OF SER VICE The V isuaLin k 128 and the V isuaLin k 384 ar e stand-a lone de vices tha t allow mul timedia co nfere ncing by transmi tt ing vid eo, a udi o and dat a t o r emote lo cat ions ov er the ISDN Basic Rat e in te rf ace .
IF PROBLEMS ARISE If any of your tel ephone equipment i s not oper ating properly , you should i mmediate ly remov e it from y our telepho ne lines , as it may cause har m to the te lephone ne twork. If the tele phone company notes a p roblem, the y may temp orarily disconti nue ser vice.
CSA Requ ire ment T o ensure that ce rtif ied equip ment is attached corre ctly , and only to the networ ks of pa rticipa ting car riers, t he followi ng state ment sh all acco mpany eac h unit of cer tified equipment o f fered f or sale.
.
NDA-24233 Issue 2 Page i V isuaLink 128 /384 Eng ineering Gui de T able of C ontents T able of Contents Chapter 1: Visua Link Command Fundamentals .............. .......... .............. .............. 1-1 Summar y ..... ...... ........... ......... .
Page ii NDA-24233 Is sue 2 T able of C ontents V isuaLink 128/3 84 Engin eering Gui de DATA Command .... .. ....... .. ....... .. ....... .. ....... .. .. ....... .. ....... .. ......... ........ .. . ........ . ........ .. ....... .. . 3-1 9 SDM2 Setting LSD Speed 4-1 .
NDA-24233 Issue 2 Page iii V isuaLink 128 /384 Eng ineering Gui de T able of C ontents Report Response Contr o l Command ............ .......... ....... .. .. ....... .. ....... .. ....... .. ....... .. .. ....... .. 3-43 ITCS Conference St atus Rep ort Contro l 14-1 .
Page iv NDA-24233 Is sue 2 T able of C ontents V isuaLink 128/3 84 Engin eering Gui de Alarm Status Report Command ................... .. .. .. . ........... .. .. .. .. .. . ........... .. .. .. .. . ........... .. .. .. .. . 3-65 RALM Alarm Status Change Report (1 of 2) 26-1 .
NDA-24233 Issue 2 Page v V isuaLink 128 /384 Eng ineering Gui de T able of C ontents Chapter 4: Error Re sponse Table . ......... .......... .............. ......... ......... .............. .......... 4-1 Chapter 5: List of Fac tors for Disconnection in Table .
NDA-24233 Issue 2 Pa ge vi V isuaLin k 128/384 En gin eering Guide List of T abl es List of T ables Table 1: VIDEO Command .................................................................................................... 2-1 Table 2: AUDIO Command .
NDA-24233 Issue 2 Page 1-1 V isuaLink 128/ 384 Engineeri ng Guide Chapter 1 Chap te r 1: V isuaLi n k C om ma nd Fu nd a m en ta l s Pr eface Thank you ve ry much f or pur chasing t he V isuaLink 12 8 or V isuaLin k 384.
Page 1-2 NDA-24233 Is sue 2 Chapter 1 V isuaLink 128/3 84 Engin eering Gui de 1.3 P h ysi ca l/E l ectr ical l nte rf ace The ext ernal control port is a t the b ack of the V isuaLink and uses DIN8 p in connec tors. The maxi mum length of the c ontrol ca ble sh all be no mor e than 20 f t.
NDA-24233 Issue 2 Page 1-3 V isuaLink 128/ 384 Engineeri ng Guide Chapter 1 1.4 Communicati on Format Communicati on between a consol e and V isuaLi nk 128/3 84 is done i n a start -stop sy nchroni zation of the follo wing fo rmat .
Page 1-4 NDA-24233 Is sue 2 Chapter 1 V isuaLink 128/3 84 Engin eering Gui de Command Format Command: Tr ansmit 4- charac ter commands (only upper case can be u sed) Space: More t han one spac e is tra nsmitted b etween a command and a pa ramete r Parame ter: If a command requi res a p arameter , a parameter is assi gned.
NDA-24233 Issue 2 Page 1-5 V isuaLink 128/ 384 Engineeri ng Guide Chapter 1 1.5 Communicati on Pr ocedur e There is no proc edure for communicati on between a consol e and V isuaLi nk as a rul e. There fore, a comm un ica ti on l in e is pr esum ed to be erro r-f re e.
Page 1-6 NDA-24233 Is sue 2 Chapter 1 V isuaLink 128/3 84 Engin eering Gui de (1) C ommand 1 i s iss ued usi ng the exte rnal contro l port ra ther than a p ersona l comput er .
NDA-24233 Issue 2 Page 1-7 V isuaLink 128/ 384 Engineeri ng Guide Chapter 1 1.6 Connect ing and Inc oming Call Cont rol Basic Sequenc e Connecti ng and i ncoming cal l control basic se quence (w hen the i ncoming c all mode of the V isuaLin k receiv ing a ca ll i s set to t he ma nual i ncoming c all set ting) is shown in the fo llowin g.
Page 1-8 NDA-24233 Is sue 2 Chapter 1 V isuaLink 128/3 84 Engin eering Gui de This page is for yo ur note s..
NDA-24233 Issue 2 Page 2-1 V isuaLink 128/ 384 Engineeri ng Guide Chapter 2 Chapter 2: Console Command List T able 1: VIDEO Command T able 2: AUDIO Command T a ble 3: LINE Setting Comma nd NO F eature.
Page 2-2 NDA-24233 Is sue 2 Chapter 2 V isuaLink 128/3 84 Engin eering Gui de T able 4: DA T A Command T a ble 5: ISDN Registe ring/Sett ing Command T able 6: Camera r elat ed Registerin g/Sett ing Co.
NDA-24233 Issue 2 Page 2-3 V isuaLink 128/ 384 Engineeri ng Guide Chapter 2 T a ble 10: Registerin g Local Loc ation Name Command T able 1 1: Serial Port Cont rol Command T able 12: Acqui ring V ersio.
Page 2-4 NDA-24233 Is sue 2 Chapter 2 V isuaLink 128/3 84 Engin eering Gui de T able 17: Model Iden tifica tion Command T a ble 18: Audio T raining Command T a ble 19: ISDN Contr ol Command T a ble 20.
NDA-24233 Issue 2 Page 2-5 V isuaLink 128/ 384 Engineeri ng Guide Chapter 2 T a ble 24: Communication Stat us Report Command T able 25: Ala rm Status Report Command T able 26: V ideo Status Report Com.
Page 2-6 NDA-24233 Is sue 2 Chapter 2 V isuaLink 128/3 84 Engin eering Gui de T a ble 32: Multi-point Re lated Report Command T able 33: Multi-Scr een Rel ated Report Co mmand T able 34: Mi crop hone .
NDA-24233 Issue 2 Page 3-1 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List Chapter 3: Command Detailed Format Command detai ls are de scri bed in thi s sectio n accordin g to th e followi ng format. Command Name Command Num ber Desc rip tio n: Describe command fe atures.
Page 3-2 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.1 VIDEO Commands SVFM Setting Video Format 1-1 RVFM Checking Video Format Setting 1-2 Desc riptio n: This sets v ideo fo rmat. V isuaLi nk 128/384 i s equipped with a f eature t o code acti ve video with kinds of r esoluti on.
NDA-24233 Issue 2 Page 3-3 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SPIP Setting Pic ture-in-Pic ture 1-3 RPIP Checking Pi cture-i n-Picture Setting 1-4 Desc riptio n: Sets PIP (.
Page 3-4 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SSND Setti ng V ideo I nput Switc h 1-5 RSND Checking Video Input Setting 1-6 Descript ion: This sets v ideo input switch.
NDA-24233 Issue 2 Page 3-5 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SDSP Setting Mo nitor Ou tput V ideo 1-7 Note: User will be unable to switch to STILL PICTURE if STILL PICTURE gr aphics has not been s ent. RDSP Checki ng Moni tor Outp ut V ideo Se tting 1-8 Desc riptio n: Sets output video im age.
Page 3-6 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SPDP Setting/Checking PIP Display Format 1-9 SPSW Setting/Checking PIP Image when Snapshot is V iewed 1-10 Desc riptio n: Setting the displ ay imag e seen i n the picture- in-pi cture (PIP) wind ow .
NDA-24233 Issue 2 Page 3-7 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SCPI Settin g/Che ckin g V ideo Prio rity 1-1 1 S263 Setting H.263 1-12 Descript ion: The V isuaLink has a functi on to au tomati cally opti mize th e pict ure qualit y , (e.
Page 3-8 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide R263 Checking H.263 Setting 1-13 Desc riptio n: Reporting t he current sett ing by S263 c ommand Command Format: R263 Response: Nor mal Respo nse: p1 OK p1: ON : H.
NDA-24233 Issue 2 Page 3-9 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.2 AUDIO Command SAMD Setting Au dio Mode 2-1 RAMD Checking Au dio Mode Set ting 2-2 Descript ion: Sets the aud io coding f ormat. The Vi suaLin k is capab le of µ -La w PCM, SBADPCM and LP-CELP.
Page 3-10 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SADL Setting Audio Delay 2-3 Descript ion: Sets audio d elay (li p sink). De lay is gen erate d when video is code d in transmi ssion, and the amount of del ay differ s depending on a transmissi on speed.
NDA-24233 Issue 2 Page 3 -11 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RADL Checking Au dio Mode Setting 2 -4 SMIC Setti ng MIC ON /OFF 2-5 Desc rip tio n: C heck s the curre nt a.
Page 3-12 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide RMIC Checking MIC ON/OFF Setting 2-6 SVOL Setting V olu me 2-7 R VOL Checkin g V olume Setting 2-8 Descript io.
NDA-24233 Issue 2 Page 3 -13 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SASW Se tting Aud io Inp ut/Outp ut Port 2-9 RASW Checking Audio Input/Output Port Setting 2-10 Descript ion: Sets the aud io input p ort an d output por t.
Page 3-14 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SMMT Sets Audio or Audio/V ideo Outgoing Mute Setting 2-1 1 RMMT Checking Audio or Audio/V ideoOutput Mute Set.
NDA-24233 Issue 2 Page 3 -15 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SMTC Sets Audio or Audio/V ideo Mute Setting 2-13 RMTC Checking Audio or Audio/V ideoOutput Mute Setting 2-1.
Page 3-16 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.3 LINE Sett ing Command SNET Setting Netw ork T ype (P x 64/56) 3-1 Note: The co mmand can onl y be i ssued when t he VisuaLink is not in a cal l. RNET Checking Network T ype Setting (P x 64/56) 3-2 Descript i on: Sets a network ty pe ( P x 64/ 56) .
NDA-24233 Issue 2 Page 3 -17 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List NNSS Setting Transmission Line Type 3-3 Note: High Sp eed dig ital bas ic le ased line s are c urren tly only a vaila ble in Japan.
Page 3-18 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SLSP Se ttin g Trans missi on Line Spee d 3-5 RLSP Checking Transmission Line Speed Settin g 3-6 Note: The res ponse will always be a 64 kbps incr ement. It is recommended that th e RNET command be used combined wi th RLSP.
NDA-24233 Issue 2 Page 3 -19 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.4 DA T A Command SDM2 Setting LSD S peed 4-1 Desc riptio n: Setting Low Spe ed Data (LSD) port speed • Allows for H.28 1 far-end camera c ontrol • PC-to-PC data transmis sion Command Format: SDM2 p1 p1: OFF : OFF 1.
Page 3-20 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide RDM2 Check ing LSD Sp eed Sett ing 4-2 SDM3 Setting ML P Speed 4-3 Descript ion: Report ing the c urrent LSD speed by S DM2 command Command Format: RDM2 Response: Nor mal Respo nse: p1 OK p1: OFF : OFF 1.
NDA-24233 Issue 2 Page 3 -21 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RDM3 C heckin g MLP Spee d Setti ng 4-4 Descript ion: Checks the cu rrent MLP speed set ting. Command Format: RDM3 Response: Normal Respo nse: p1 OK p1: OFF : OFF 4.
Page 3-22 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.5 ISDN Regis tering/S ettin g Command NDSS Registering My Num ber 5-1 Descript ion: Reg iste rs a l ocal dial n umber. I n a communi cati on, a l ocal d ial n umber is repo rted t o the remo te sit e at a call origi natio n.
NDA-24233 Issue 2 Page 3 -23 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List NDSR Checking My Number Registration 5-2 Descript ion: Checks the current loca l dial number se tting. In a communi cation, a loc al dial number is reported to the r emote site at a call or igina tion.
Page 3-24 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide MDST Registering Sp eed Dial 5-3 Descript ion: Visua Link can registe r a maximu m of 130 s peed dial numbers.
NDA-24233 Issue 2 Page 3 -25 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List MDRD Checking Speed Dial Registration 5-4 Desc rip tio n: C heck s the curre nt r egist ers s pee d dia l num ber.
Page 3-26 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide NBZS Settin g Incoming Cal l Buzzer 5-6 Note: This command is ineffect ive whe n settin g incomi ng mode is set to Aut omatic . Utilize this com mand only in th e M anu al An swer mode .
NDA-24233 Issue 2 Page 3 -27 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SINC Setting Incoming C all Mode 5-8 Descript ion: Sets th e incoming call mod e. There are three ways t o receive an incoming call: manual i ncoming cal l mode, automa tic i ncoming cal l mode, and select ive in coming call mode.
Page 3-28 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SRNG Setting/Checking Incoming Call Buzzer at Auto Answer Mode 5-9 SPID Registerin g SPID 5-10 Desc riptio n: .
NDA-24233 Issue 2 Page 3 -29 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RPID Checking SPID 5-11 Desc rip tio n: R epor ting curre nt S P ID Command Format: RPID p1 p1: L11 : Line1 .
Page 3-30 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.6 Camera Rel ated Regist ering/Set ting Command CPPS Registering Camera Prese t Position 6-1 CPNS Registering Talker Name 6-2 Descript ion: Regis ters a ca mera pr eset posi tion.
NDA-24233 Issue 2 Page 3 -31 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List SCMK Setting Camer a Model 6-3 RCMK Checking Cam era Mode l Setting 6-4 Descript ion: Sets types of camera whi ch will be controll ed.
Page 3-32 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.7 Communicati on Status Re ading Command RMAC Read Manuf acturer Code 7-1 Desc ri ptio n : Ac qu ire s ma nufa cture r code of a re mote si te.
NDA-24233 Issue 2 Page 3 -33 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RMOD Read Comm on Mode During Communication 7-2 Descript ion: Reads negoti ated para meter s etting.
Page 3-34 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide R221 Read H.221 Synchronous Status 7-3 RPNA Read Remote S ite Name (at Poin t-to-Point) 7-4 Descript ion: This reads a status o f the H.
NDA-24233 Issue 2 Page 3 -35 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RCST Read Partic ipating Conf erence S tatus 7-5 Descript ion: This reads c onferenc e partic ipating s tatus.
Page 3-36 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.8 Ala rm Related Command CALM Read Alarm Status (1 of 2) 8-1 Descript ion: Acq uires alarm st atus. This is u sed to ch eck t he inf ormati on of a genera ted alarm and the loopba ck sta tus.
NDA-24233 Issue 2 Page 3 -37 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List CALM Read Alarm Status (2 of 2) 8-1 Response p4: Bondi ng alarm D0: Bonding frame loss 0: normal 1: abnormal.
Page 3-38 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.9 Histor y Reading Command RLAM Read Communication/Alar m History 9-1 Descript ion: Acquir es communi cation hi story an d alarm history.
NDA-24233 Issue 2 Page 3 -39 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.10 Reg istering Loca l Location Na me Command MRNS Registe ring Local Si te Name 10-1 Desc rip tio n: R egi st ers a loca l site locat ion nam e.
Page 3-40 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.1 1 Serial P ort Contr ol Command SSIO S etting Serial Port 11-1 RSIO Checking Serial Port Setting 11-2 Desc.
NDA-24233 Issue 2 Page 3 -41 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.12 Acq uiring V ersion Command RVER Requesti ng Software Versi on 12-1 Desc rip tio n: A cqui res t he Vi sua Link softw are ve rsi on.
Page 3-42 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.13 Mainte nance Command SLLB Setting Local Loopback 13-1 RLLB Checking Local Loopback Setting 13-2 Descript ion: Sets local lo opback pr ocess.
NDA-24233 Issue 2 Page 3 -43 V isuaLin k 12 8 /38 4 En g i neerin g Guide Co n s o l e Co m mand List 3 . 14 Re p ort Response Cont r ol Command ITCS Conference Status Report Control 14-1 IMCU Multi-p.
Page 3 -44 NDA - 24233 Is sue 2 Console C om m and L ist V is u aLink 1 28/ 3 8 4 Engi n eerin g G u ide I243 H.243 Report Control 14-3 ICGP Command Gene rator Related Re port Control 14-4 Descript ion: Acti vatio n /deact ivatio n o f H.
NDA-24233 Issue 2 Page 3 -45 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.15 Mainte nance and Other Co mmand ISPR S etting Parameter Initialization 15-1 CRAM Clearing Bac kup Memory 15-2 RRST System Reset Requ est 15-3 Desc ri ptio n : Ini tializ es al l V isua Link value s to fa cto ry defau lt.
Page 3-46 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide WCLK Setting System Clock 15-4 RCLK Checking System Clock Setting 15-5 Descript ion: Sets the Vis uaLink buil t-in sy stem cl ock, dat e and time.
NDA-24233 Issue 2 Page 3 -47 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.16 Mutli- point Confer ence Status Command RMNA Read Multi-point Conference Participating Location Name 16-1 Descript ion: Acquir es lo cation name of all locati on partic ipating l ocat ions in mult i- point co nfere nce.
Page 3-48 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide RMST Read Multi-point Conference Operation Status (NEC Specific) 16-2 Descript ion: Acquir es a status of a multi-poi nt conf erence s tatus when in a ctivate d for NEC specif ic mult i-point conferenc e.
NDA-24233 Issue 2 Page 3 -49 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List RMPS Read Multi-point Conference Operation Status 16-3 RMMD Read Multi-po int Conference Mode Status 16-4 Descript ion: Acquir es th e multi-po int confe rence status.
Page 3-50 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.17 Model I dentific ation Command RMES Read Model Identification 17-1 Descript ion: Read mode l iden tifica tion Command Format: RMES Response: Normal Respo nse p1 p2 OK p1: TC2000_EC : VL128 TC2000_6B : VL384 p2: F/W ver sion: ex.
NDA-24233 Issue 2 Page 3 -51 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.18 Audio T raining Command ECTS Audio Training Command 18-1 Descript ion: Init iate aud io tr aining.
Page 3-52 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.19 IS DN Contro l Command NCRN Requesting C onnection 19-1 Descript ion: Plac ing a BRI ISDN call. A c all can be reques ted by ei ther dir ectly specif ying a remot e number or usi ng an speed d ial numb er.
NDA-24233 Issue 2 Page 3 -53 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List NDSC Requesting Disconnection 19-2 NCIC Incoming Call Permit/Reject 19-3 Descripti on: A disconne ct in an BRI ISDN call. Th is command is used to ex ecute a disconne ction request a nd ending c ommunicat ion.
Page 3-54 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide NSTQ Communication Status Inqu iry 19-4 Descript ion: Gives a status on the I SDN communica tion.
NDA-24233 Issue 2 Page 3 -55 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.20 Camera Cont rol Command CAMS Request for Camera Direction Change 20-1 Descript ion: Sets camera h ead swing co ntrol. This command i s valid o nly when an preset or auto mode camera i s in use .
Page 3-56 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.21 Option Contr ol Command POCS Pointer Control 21-1 VCTS Talker Detection Cont rol 21-2 Desc riptio n: Activates or dea ctiva tes the on-scr een point er . The poin ter is displ ayed at the r emote monit or.
NDA-24233 Issue 2 Page 3 -57 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List STPR SnapShot Transmission Request 21-3 SXMR Standard Display Screen Setting Request 21-4 Descript ion: Sends a snaps hot (sti ll graphi c) ima ge to the r emote sit e.
Page 3-58 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide SXST Req uest to Ac quire C omposite Scree n Setti ng 21-5 Descript ion: Reque st for stat us on the various vi deo screens di splays.
NDA-24233 Issue 2 Page 3 -59 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.22 Mult i-poin t Confe rence Contr ol COPR Request to Chairman Control 22-1 Descript ion: Acquir es or deletes c hairman con trol. Command is only valid when the VisuaLink is in a multi-po int co nference .
Page 3-60 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide CSPR Multiple Address Transmission Request 22-2 Descript ion: Acquir es th e simulcas t transmi ssion.
NDA-24233 Issue 2 Page 3 -61 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List CRPR Specific Picture Reception Requ est 22-3 CMPR Request to Switch Multiple Address Originator Monitor 22-4 Descript ion: Acti vates or d eacti vates sel ective r eceive mode .
Page 3-62 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.23 Open ing Contr ol Command OMES Opening Message at Unit Activation 23-1 Descript ion: Report openi ng message at power u p. This is report ed when the unit i s auto matical ly re -start due to s ome fai lure.
NDA-24233 Issue 2 Page 3 -63 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.24 Communicat ion Status Report Command H221 H.22 1 Synchronous Status Report 24-1 IMAC M anufac turer C ode Re port 24-2 Descript ion: H.221 re porti ng status change.
Page 3-64 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide IMOD Report of Common Mode in Communication 24-3 Descript ion: Report s the negotiat ed mode duri ng a communi cation.
NDA-24233 Issue 2 Page 3 -65 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.25 Alarm St atus Repo rt Command RALM Alarm Status Change Report (1 of 2) 25-1 Descri ption: Re ports the VisuaLink alarm s tatus. Thi s is repo rted when al arm and loo pback status is change d.
Page 3-66 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide RALM Alarm Status Change Report (2 of 2) 25-1 p4: Bonding al arm D0 : Bonding frame los s 0: normal 1: abnorma.
NDA-24233 Issue 2 Page 3 -67 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.26 Video S tatus Report Command R V SR Incoming V ideo Synchr onous Status Report 26-1 Descript ion: Visua Link monit ors a syn chronizat ion st atus of a receive d video, and a report is made wh en a recei ved video s ynchro nization stat us changes.
Page 3-68 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.27 Pa rticipating Status Report Command ICST Participating Conference Status Report 27-1 Desc rip tio n: R epor ts pa rtic ip ati ng co nfe ren ce stat us.
NDA-24233 Issue 2 Page 3 -69 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.28 ISDN Repor t Command NALT Display Dur ing Calling 28-1 NINC Incoming Call Report 28-2 NONL On-line Report 28-3 Desc ri ptio n : Ca ll r epor t sta tu s an or igi na tion p oint .
Page 3-70 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide NDCI Disconnection R eport 28-4 Descript ion: Report s dis connectin g the ISDN li ne. Thi s is a rep ort to sh ow that communic ation is discon nected. Sec tion 9 des cribes t he disconn ectio n reason.
NDA-24233 Issue 2 Page 3 -71 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.29 Camera Cont rol Report Command CAMI Camera Status Report 29-1 CPNI Talker Name Display Report 29-2 Descript ion: This is a st atus rep ort on the remote camera c ondition .
Page 3-72 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.30 Option Contr ol Report Command STEI SnapShot Transmission Ending Report 30-1 RFVR SnapSho t Reception R eport 30-2 Descript ion: This is a r eport noti fying a s napshot transmis sion is c ompleted.
NDA-24233 Issue 2 Page 3 -73 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.31 Other Re port Command CGSI Automatic A ctivation File Starting Report 31-1 CGEI Automatic A ctivating File Ending Report 31-2 Desc rip tio n: T his is a rep ort to sho w the st art o f au to exe c uted f ile.
Page 3-74 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.32 Multi -Point Rela ted Repor t Command IMPS Multi-poi nt Confer ence Oper ation Statu s Report 32-1 IMMD M.
NDA-24233 Issue 2 Page 3 -75 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List CSPI Multiple Address Transmission Report 32-4 CRPI Spe cific P ict ure Re ceptio n Rep ort 32-5 CVCI Talker Dete ction Control Rep ort 32-6 Descript ion: Thi s is to report the co mple tion of a simulca st tr ansmiss ion.
Page 3-76 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide CSSC SnapShot Transmission Permit Report 32-7 CMPI Multiple Addr ess Originator Mo nitor V ideo Switch Report 32-8 CJNI T erminal C onnect ion Report 32-9 Descript ion: This report is a req uest to t ransmit a snapsho t.
NDA-24233 Issue 2 Page 3 -77 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List CSTI Conference Stat us Report 32-10 Descript ion: This is to report the multi-point conference status. This i s reported only in a NEC s peci fic mu lt i-p oi nt con fer en ce.
Page 3-78 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.33 Multi -Scre en Related Re port Command XMII Composite Screen Setting Report 33-1 XMCI Standard Display Scr een Setting Report 33-2 Descript ion: Report s a compo site scr een sett ing.
NDA-24233 Issue 2 Page 3 -79 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List XSCI Response to Composite Screen S etting Request 33-3 Descri ption: This is a res ponse repo rt of compos ite scr een set ting/ac quisiti on request .
Page 3-80 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.34 Micr ophone Command PPNI Voice Activate Microphone Report 34-1 Descript ion: Report microp hone that inpu.
NDA-24233 Issue 2 Page 3 -81 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.35 Sy stem Err or Command ERRI System E rror Repo rt 35-1 Descri ption: Re port syst em error Command Form.
Page 3-82 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide 3.36 On-Scr ee n Command SOSD Setting On-Screen Display 36-1 Descript ion: Sets the On- Screen dis plays for t.
NDA-24233 Issue 2 Page 3 -83 V isuaLink 128 /384 Eng ineering Gui de Conso le Com mand List 3.37 Curr ent Power OFF Conditi on CSTB Curre nt Power OFF Condition 37-1 Descript ion: Set an d read the curren t Power OFF Cond ition. The CODEC ou tputs b lack video when no user inte rvention has been ac ted on for a peri od of t ime.
Page 3-84 NDA-24233 Is sue 2 Console C ommand L ist V isuaLink 1 28/384 Engineering Guide This page is for yo ur note s..
NDA-24233 Issue 2 Page 4-1 V isuaLink 128/ 384 Engineeri ng Guide Error Respo nse T able 4: Err or Response T a ble If a command input fr om consol e is not u nderstand able or ha s a dif ferent c onfigura tion, a n error r esponse i s trans mit te d to th e co n sol e.
Page 4-2 NDA-24233 Is sue 2 Error Res ponse T able V isuaLink 128/ 384 Engi neering Guide Figure 4 -1: Err or Respo nse T able (2 /2) ERR N umbe r Conte nts C ount erme as ure s ERR46 Off l ine. C heck c ommunic ation status and exe cute comma nd aga in.
NDA-24233 Issue 2 Page 5-1 V isuaLink 128 /384 Eng ineering Gui de Factors of Discon nections 5: List of Factors for Disconnectio n in T abl e Locatio n of Fact ors for Disconnect ion LU: Local Us er .
Page 5-2 NDA-24233 Is sue 2 Factors o f Disc onnectio ns Number Messag e Factors for Disconn ection Countermeasure (Ex ample) Loca tion # 50 Request ed facili ty not subscr ib ed Procedure for a reque st ed fa ci lit y i s not taken . Contact a reta iler or a servic e center.
NDA-24233 Issue 2 Page 5-3 V isuaLink 128 /384 Eng ineering Gui de Factors of Discon nections Number Messag e Factors for Disconn ection Countermeasure (Ex ample) Loca tion # 111 Protocol error, unspecif ied Report o f other proto col error. Aft er checking a remote number, retry .
Page 5-4 NDA-24233 Is sue 2 Factors o f Disc onnectio ns This page is for yo ur note s..
NDA-24233 Issue 2 Page A-1 V isu aLink 1 28/384 E n gineer ing Guid e Appendix A Appendix A: Pin-out Specification Pin-out specifi cations f or all t he VL 128/ 384 connect ors. SERIAL 1 POR T Note: The signal di rection shown is seen f rom the V isuaLink 128 ( DTE).
Page A-2 NDA -24233 Issue 2 Append ix A V isuaLink 1 28/384 E nginee ring Guide S/T Line (IS DN Connecti on) Note 1: The sign al dir ectio n shown is s een fr om the V isuaLink 128 (DTE).
NDA-24233 Issue 2 Page B-1 V isuaLink 128/ 384 Engineeri ng Guide Appendix B Appendix B: Line Speed Specificatio ns X : ca n not se t ∆ : can set but vid eo is not transmitt ing : snaps hot not av ailab le X : ca n not se t 1B (64kbps) Line Speed A udio Algorithm s G.
Page B-2 NDA-24233 Is sue 2 Append ix B V isuaL ink 1 28/384 E nginee ring Gu ide This page is for yo ur note s..
NDA-24233 Issue 2 Page C-1 V isuaLink 128/ 384 Engineeri ng Guide Appendix C Appendix C: ISDN Q .931 Cause Code Definitions The foll owing t able defi nes the Q.931 cause codes that the Visua Link 128/ 384 write s to event file s. Q.9 31 s p ecif ic ati on de fine s the l aye r-3 pr oto col f o r two connecte d ISDN devi ces.
Page C-2 NDA-24233 Is sue 2 Append ix C V isuaL ink 1 28/384 E nginee ring Gu ide 43 Access i nformat ion disc arded T he netwo rk could not de liver acc ess info rmatio n; the t ype of informa tion d iscarded - for ex ample, s ub-add ress or protocol - may be pro vided in the mess age.
NDA-24233 Issue 2 Page C-3 V isuaLink 128/ 384 Engineeri ng Guide Appendix C 901 No response fro m the rem ote termin al Automat ic diale r has ti med out. Please check number a nd try a gain. 903 Network failure Layer 1 failur e. Verify p hysical network connecti on.
Page C-4 NDA-24233 Is sue 2 Append ix C V isuaL ink 1 28/384 E nginee ring Gu ide This page is for yo ur note s..
An important point after buying a device NEC NDA-24233 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC NDA-24233 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC NDA-24233 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC NDA-24233 you will learn all the available features of the product, as well as information on its operation. The information that you get NEC NDA-24233 will certainly help you make a decision on the purchase.
If you already are a holder of NEC NDA-24233, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC NDA-24233.
However, one of the most important roles played by the user manual is to help in solving problems with NEC NDA-24233. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC NDA-24233 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
