Instruction/ maintenance manual of the product USB-9201 National Instruments
Go to page of 16
USER GUIDE AND SPECIFICATIONS USB-9201/9221 8-Channel, 12-Bit Analog Input Devices This user guide describes how to use the National Instruments USB-9201/9221 devices and lists the specif ications. Introduction This user guide describes how to use the National Instruments USB-9201/9221.
USB-9201/9221 User Guide an d Specifications 2 ni.com Dimensions Figures 2 and 3 show the USB-9201/9221 device dimensi ons. Figure 2. USB-9201/9221 Devices in Inches (Millimeters) Figure 3. USB-9201/9221 (DSUB) Device s in Inches (Millimeters) 25.34 mm (0.
© National Instruments Corporation 3 USB - 9201/9221 User G uid e and Specifications Safety Guidelines Operate the USB-9201/9221 only as descri bed in these operating instructions.
USB-9201/9221 User Guide an d Specifications 4 ni.com Software Software support for the USB-920 1/9221 is provided by NI-DAQmx. The NI-DAQmx CD contains exampl e programs that you can use to get started programming w ith the USB-9201/9221 .
© National Instruments Corporation 5 USB - 9201/9221 User G uid e and Specifications Figure 4. Module Installation 4. Squeeze the latches and insert the NI 9201/9221 mo dule into the USB-9162 carrier . 5. Press firmly on the connector side of the NI 9201/9221 module until the latches lock the module in to place, as shown in Figure 5.
USB-9201/9221 User Guide an d Specifications 6 ni.com Mounting the USB-9201/9221 to a Panel Threaded inserts are located in the USB-920 1/9221 for mounting it to a panel.
© National Instruments Corporation 7 USB - 9201/9221 User G uid e and Specifications Wiring the USB-9201/9221 The USB-9201/9221 pro vides connection s for eight analo g input channels. The USB-9201/9221 with screw terminal has a 10-terminal, detachable high voltage screw-terminal backshell.
USB-9201/9221 User Guide an d Specifications 8 ni.com Figure 7. Pin Assignments Table 2. T erminal As signments Module T erminal Signal 0 AI 0 1 AI 1 2 AI 2 3 AI 3 4 AI 4 5 AI 5 6 AI 6 7 AI 7 8 No con.
© National Instruments Corporation 9 USB - 9201/9221 User G uid e and Specifications Assembling the High V oltage Screw T erminal Backshell The high voltage screw terminal back shell must be instal led when using hazardous voltages (>42.4 V pk , 60 VDC).
USB-9201/9221 User Gui de and Specifications 10 ni.com Refer to your software documentation, acces sible from Start» All Programs»National Instruments»NI-DAQ , for information about different methods of reading USB-9201/9221 data.
© National Instruments Corporation 11 USB -9201/9221 User Gu ide and Specifications Sample rate (aggr egate) 1 USB-9201 Single channel......................... . 800 kS/s max Scanning ................... ........... .... 500 kS/s USB-9221 ...........
USB-9201/9221 User Guide an d Specifications 12 ni.com Stability Offset drift USB-9201 .................. .............. .± 100 μ V/°C USB-9221 .................. .............. .± 580 μ V/°C Gain drift ............ .............. ........... ..
© National Instruments Corporation 13 USB -9201/9221 User Gu ide and Specifications Physical Characteristics If you need to clean the module, wipe it with a dry towel. Dimensions With combicon ....................... ......... 14.0 cm × 8.8 cm × 2.
USB-9201/9221 User Guide an d Specifications 14 ni.com Isolation Voltages for USB-9201/9221 with DSUB Channel-to-channel ............. .............. ......None Channel-to-earth g round Continuous ............. .............. ............60 VDC, Measurement Category I Withstand .
© National Instruments Corporation 15 USB -9201/9221 User Gu ide and Specifications Operating humidity (IEC 60068-2-56) ................. ......... ......... 10 to 90% R H, noncondensing Storage humidity (IEC 60068-2-56) ................. ......... .
National Instruments, NI, ni.com, and LabVIEW are tradem arks of National Instruments Corporation. Refer to t he Terms of Use section on ni.com/legal for more information abou t National Instruments trademarks. Other product and compan y names mentioned herein are trademarks or tr ade names of their respective companie s .
An important point after buying a device National Instruments USB-9201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments USB-9201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments USB-9201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments USB-9201 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments USB-9201 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments USB-9201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments USB-9201.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments USB-9201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments USB-9201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
