Instruction/ maintenance manual of the product Network Device NI PXI-7811R National Instruments
Go to page of 8
Getting Started with the NI PXI-7811R This document explains ho w to set up the National Instruments PXI-7811R device. Introduction The PXI-7811R is an R Series rec onfigurable I/O (RIO) device with 160 digital I/O (DIO) lines.
Getting Started with the NI 7811R 2 ni.com Required Items This section prov ides lists of the item s necessary for get ting started usi ng the PXI-7811R with Windows 2000/XP and th e LabVIEW Real-Time Module.
© National Instruments Corporation 3 Getting Started with the NI 78 11R – LabVIEW FPGA Module 1.1 or later—required to dev elop custom FPGA VIs for the PXI-7811R device – NI-RIO 1.
Getting Started with the NI 7811R 4 ni.com Installing NI-RIO Device Drivers Complete the f ollowing step s to insta ll the NI-RIO device drivers that are included with the PXI-7811 R device.
© National Instruments Corporation 5 Getting Started with the NI 78 11R Installation You can install the PXI-7811R in any available peri pheral slot in the PXI or CompactPCI chassis. Com plete the following steps to inst all the PXI-7811R device. Note Y ou must install the software before installing th e hardware.
Getting Started with the NI 7811R 6 ni.com Figure 1. PXI- 7811R Connector Locations CONNECTOR 0 (DIO) CONNECTOR 1 (DIO) CONNECTOR 3 (DIO) CONNECTOR 2 (DIO) Reconfigurable I/O NI PXI-7811R.
© National Instruments Corporation 7 Getting Started with the NI 78 11R Figure 2 shows the pin assignments for all I/O connectors on the PXI-7811R. Figure 2. PXI-7811R I/O Connector Pin Assignments Caution Connections that exceed any of the maximum ratings of input or output si gnals on the PXI-7811R can damage the PXI-7811R and the comput er .
CompactRIO™, LabVIEW™, MXI™, Nation al Instruments™, NI™, ni.co m™, and NI-VISA™ are trademarks of National Instrument s Corporation. Pr odu ct and company names mentioned herein are trademarks or trade names of t heir respective comp ani es.
An important point after buying a device National Instruments Network Device NI PXI-7811R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments Network Device NI PXI-7811R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments Network Device NI PXI-7811R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments Network Device NI PXI-7811R you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments Network Device NI PXI-7811R will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments Network Device NI PXI-7811R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments Network Device NI PXI-7811R.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments Network Device NI PXI-7811R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments Network Device NI PXI-7811R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
