Instruction/ maintenance manual of the product FP-1600 National Instruments
Go to page of 8
FieldPoint ™ and natinst.com ™ are trademarks of National Instruments Corporation. Product and company names mentioned here in are trademarks or trad e names of their respective companies. 322395A-01 © Copyright 1999 National Instruments Corp. All rights reserved.
FP-1600 2 www.natinst.com • T erminal bases and I/O modules, complete list of terminal bases and I/O modules in the National Instruments online catalog at www.
© National Instruments Corp. 3 FP-1600 Figure 2. Mounting the FP-1600 onto a DIN Rail b . Slide the FP-1600 to the desired position along the DIN rail. c. Lock the FP-1600 to the DIN rail by pushing the rail clip to th e locked positio n. • Installing onto a panel mount accessory , which you can order separately from National Instruments: a.
FP-1600 4 www.natinst.com b . Lock the panel mount accessory into place b y pushing the rail clip to the locked position. c. Mount the FP-1600 and panel mount accessory onto the desired surface. Y ou can drill pilot holes using the directions in the FieldPoint Network Module Pa nel Mount Accessory installation guide.
© National Instruments Corp. 5 FP-1600 Figure 5. Power and Ethernet Connectors on the FP-1600 Cabling If you need to build your o wn cables, the following tab le shows the standard ethernet cable wiring connections for both normal and crossov er cables.
FP-1600 6 www.natinst.com Figure 6 shows the connector pinouts for FieldPoint Ethernet cables. Figure 6. Ethernet Cable Powering the FP-1600 Caution Connect the FP-1600 to the terminal base before applying power to the FP-1600 to a void damaging the FP-1600 or a terminal base.
© National Instruments Corp. 7 FP-1600 Figure 7. FP-1600 Power Connector Pinout Connect the primary po wer supply to the center V and C pair . Y ou can connect an optional backup po wer supply to the left V and C pair . The right V and C pair provides a conv enient means of connecting po wer to the V and C terminals of a terminal base.
Compliance Electrical safety ................................ designed to meet IEC 1010 EMI emissions/immunity........ .. ........ CISPR 11 CE Mark Compliance This product meets applicable EU directi ve(s) as follows: EMC directi ve Immunity .........
An important point after buying a device National Instruments FP-1600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments FP-1600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments FP-1600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments FP-1600 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments FP-1600 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments FP-1600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments FP-1600.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments FP-1600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments FP-1600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
