Instruction/ maintenance manual of the product 2 SD Card Memory Module NI 9802 National Instruments
Go to page of 16
OPERATING INSTRUCTIONS AND S PECIFICATIONS NI 9802 2 SD Card Memo ry Module.
NI 9802 Operating I nstruction s and Specificati ons 2 ni.com The National Instruments 9802 is an SD Car d storage module that can read from and write to SD Cards. Note The NI 9802 is supporte d only in CompactRIO activ e chassis, such as the cRIO-910 x .
© National Inst ruments Corp. 3 NI 9802 Operating Instructions and Specific ations Safety Guidelines Operate the NI 9802 only as described in these operating instructions. Hot Surface This icon denotes that the component may be hot. T ouching this component may result in bodily injury .
NI 9802 Operating I nstruction s and Specificati ons 4 ni.com Caution Substitution of component s may impair suitability for Class I, Division 2. Caution For Zone 2 applications, install the system in an enclosure rated to at least IP 54 as defined b y IEC 60529 and EN 60529 .
© National Inst ruments Corp. 5 NI 9802 Operating Instructions and Specific ations the system in a metal enclosure. Suppression ferrites must be installed on power supply inputs near po wer entries to modules and co ntrollers.
NI 9802 Operating I nstruction s and Specificati ons 6 ni.com descriptions of each of the LEDs on the NI 9802 and when it is safe to remov e SD Cards from the NI 9802.
© National Inst ruments Corp. 7 NI 9802 Operating Instructions and Specific ations LEDs Table 1. LED Descripti ons LED SD Card Slot Description Present (Card 0), Green SD Card Slot 0 This LED is lit w hen an SD Card is in Slot 0 and the SD Card slot do or is closed.
NI 9802 Operating I nstruction s and Specificati ons 8 ni.com SD Card Slot Doors Do not open an SD Card slot door or remov e an SD Card while the yellow LED for that card is lit or flash ing.
© National Inst ruments Corp. 9 NI 9802 Operat ing Instructi ons and Specif ications about support for sleep mode. Y ou can enable sleep mode in software. Refer to the driv er software documentation for more information. Caution Do not enable sleep mode wh ile either of the SD Card slot yellow LEDs are lit or flashing.
NI 9802 Operating I nstruction s and Specificati ons 10 ni.com Data Storage Chara cteristics Number of SD Cards ....... ......... ........ 2 Storage ..... ......... ........... ......... ........... . 2 GB max storage for each SD Card Data transfer. .
© National Inst ruments Corp. 11 NI 9802 Operating Instructi ons and Specific ations Physical Characteristics If you need to clean the module, wipe it with a dry towel.
NI 9802 Operating I nstruction s and Specificati ons 12 ni.com Hazardous Locations U.S. (UL) ........ ........... ......... ......... ..... Class I, Division 2, Groups A, B, C, D, T4; Class I, Zone 2, AEx nA IIC T4 Canada (C-UL) ................... ..
© National Inst ruments Corp. 13 NI 9802 Operating Instructi ons and Specific ations Ingress protection.... ......... ............ ..... IP 40 1 Operating humidity (IEC 60068-2-56)....... ........... ............ 10 to 90% RH, noncondensing Storage humidity (IEC 60068-2-56).
NI 9802 Operating I nstruction s and Specificati ons 14 ni.com Electromagnetic Compatibility This product is designed to meet the requirements of the following standards of EMC for electrical equipmen.
© National Inst ruments Corp. 15 NI 9802 Operating Instructions and Specific ations Waste Electrical and Electronic Eq uipment (WEEE) EU Customers At the end of their li fe cycle, all products must be sent to a WEEE re c ycling center . For more information about WEEE recycling centers and National Instruments WEEE init iati ves, visit ni.
© 2007 National I nstruments Corp. All rights reserved. 374181A-01 May07 National Instruments, NI, n i.com, and LabVIEW are tr ademarks of National Instrument s Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments t rademarks.
An important point after buying a device National Instruments 2 SD Card Memory Module NI 9802 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments 2 SD Card Memory Module NI 9802 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments 2 SD Card Memory Module NI 9802 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments 2 SD Card Memory Module NI 9802 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments 2 SD Card Memory Module NI 9802 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments 2 SD Card Memory Module NI 9802, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments 2 SD Card Memory Module NI 9802.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments 2 SD Card Memory Module NI 9802. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments 2 SD Card Memory Module NI 9802 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
