Instruction/ maintenance manual of the product MT5634IND Multi-Tech Systems
Go to page of 28
Data/Fax Industrial Temperature Modem MT5634IND User Guide.
Copyright and Technical Sup port Multi-Tech Systems, Inc. MT5634IND User Guide (S0 00369A) 2 User Guide MT5634IND Data/Fax Industrial Temperature Mod em S000369A Rev. A Copyright This publication may not be r eproduced, in whole or in pa rt, without prior expressed written permission from Multi- Tech Systems, Inc.
Table of Contents Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 3 Contents Chapter 1 – Descriptio n and Speci fications ..................................................................................... .........................5 Introduc tion .
Table of Contents Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 4 Telecom Requirements fo r the Unit ed Stat es ..................................................................................... ................. 24 Industry Canada ...
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 5 Chapter 1 – Descript ion and Specif icat ions Introduction This guide highlights the featu res and specifications of the MT5634IND modem and sh ows you how to set up and operate your Multi-Tech MultiModemIND.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 6 Features and Technical Specifications Data Interface Serial, Binary, Asynchronous Data Rates Serial interface su.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 7 Electrical Specifications Power Consumption Typical: 155 mA (.945 W @ 9V DC) 180 mA maximum 155 mA @ 6V DC 96 mA.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 8 About the Leased-Line Operation Feature The MultiModemIND can be used on a t wo-wire leased lin e. A leased line is a private, permane nt telephone connecti on bet ween two points.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 9 Chapter 2 – Instal lat ion Step 1 – Desktop Placement or Panel- Mounting The MT5634IND is design to be use d on the desktop or to be panel-mounted. For panel-mounti ng, follow these directions for attaching the mounting bracke ts: 1.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 10 Step 2 – Connect the Modem to Your System For AC Power Turn off your computer. Place the modem in a conveni ent location, and then connect it to your computer’s serial port, the phone line, and AC po wer.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 11 Step 3 – Install the Modem Driver If you use Windows 98+, you must install the modem driver , which is install ed using the Windo ws Plug and Play feature. Follow the four-st ep procedure b elow.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 12 Step 5 – Install Data Communications Software Data communications software is designed to send a nd receive messages. Multi-Tech includes Pho neTools, a communications software program with your modem.
Chapter 3 – AT Commands, S-Registers, and Result Co des Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 13 Chapter 3 – A T Comm ands , S -R eg isters and R esult Codes AT commands and Fax comm ands for the MT5634IND are pub lish ed in a separate Reference Gui de included on the MT5634IND CD and posted on the Multi-T ech Web site.
Chapter 4 – Remote Configuration Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 14 Chapter 4 – R emote Co nf ig ur ation Remote configuration is a network man age ment tool that allows you to c onfigure MT 5634IND modems anywhere in yo ur network from one location.
Chapter 5 – Callback Security Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 15 Ch apter 5 – Cal l back Securi t y This chapter describes how to use callback securit y with your modem. Callback security protects your net work from unauthorized access and hel ps control lo ng-distanc e costs.
Chapter 5 – Callback Security Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 16 Setting Callback Security Message Parity The password prompt and me ssages parity must match the parity of the computer to whic h the modem is connected. 1. Open a data communications program suc h as PhoneTools .
Chapter 5 – Callback Security Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 17 Number-Entry Callback Mobile callers should us e this procedure when callin g from a phone number different from the one stored with the password. The password that is used must be set up for optional n umber-entry callback.
Chapter 5 – Callback Security Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 18 Direct Connection Use this procedure when you want to connect without fi rst being called back. The pas s word that you use must be set up for an optional direct connectio n.
Chapter 6 – Troubleshooti ng Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 19 Chapter 6 – Troubleshooting Your modem was thoroughly tested at the factory before it was shipped.
Chapter 6 – Troubleshooti ng Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 20 • Your communication software settings may not match the physical port to which the modem is connected. The serial cable might be plugge d into the wrong conn ector—check your computer documentation to make sure.
Chapter 6 – Troubleshooti ng Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 21 • If there is no answer on the remote end, the modem reports NO CARRIER .
Chapter 6 – Troubleshooti ng Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 22 Data Is Being Lost • If you are using data compression and a h igh speed serial port, set the serial port baud rate to t wo to six times the data rate.
Appendix A – Flash Up grade Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 23 Appendix A – F lash Upg r ade Your modem is controlled by semi-perm anent firmware, which is stored in flash memory.
Appendix B – Regulator y Compliance Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 24 Appendix B – R eg ulator y Complianc e Regulatory Compliance Statements EMC, Safety, and R&TTE.
Appendix B – Regulator y Compliance Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 25 New Zealand Telecom Warning Notice 1. The grant of a Telepermit for any item of te rminal equipment indic ates only that Telecom has accepted that the item complies with minimum conditions for connecti on to its network.
Appendix C – Multi-T ech Warrant y Statement and Product Rep air Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 26 Appendix C – Multi- T e ch W ar r ant y Statement and Product R epair Warranty Multi-Tech Systems, Inc.
Appendix C – Warrant y and Service Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 27 Repair Procedures for International Cust omers (Outside U.S.A. and Canada) Your original point of purchase Rese ller may offer the quickest and most economical repair optio n for your Multi- Tech product.
Index Multi-Tech Systems, Inc. MT5 634IND User Guide (S0003 69A) 28 Inde x A AC Power Co nnecti on .............................................. 10 AC power con nection s ............................................. 10 AT comm ands .................
An important point after buying a device Multi-Tech Systems MT5634IND (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multi-Tech Systems MT5634IND yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multi-Tech Systems MT5634IND - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multi-Tech Systems MT5634IND you will learn all the available features of the product, as well as information on its operation. The information that you get Multi-Tech Systems MT5634IND will certainly help you make a decision on the purchase.
If you already are a holder of Multi-Tech Systems MT5634IND, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multi-Tech Systems MT5634IND.
However, one of the most important roles played by the user manual is to help in solving problems with Multi-Tech Systems MT5634IND. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multi-Tech Systems MT5634IND along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
