Instruction/ maintenance manual of the product A9GT-BUSSU-U Mitsubishi Electronics
Go to page of 8
A9GT-BUSSU t y pe Bus connection interface module User’s Manual Thank you for purchasing the MELSEC-GOT Series. To ensure correct use of this equipment, please carefully read this manual prior to use.
DA NGER CA UTION z SAFETY PRECAUTIONS z (Alw ays read before starting use) When using Mitsubishi equipment, thoroughly read this manual and the associated manuals introduced in the manual. Also pay careful attention to safety and handle the module properly .
[INSTA LLA TION PRECA UTIONS] CA UTION z Use this module in the environment giv en in the general specifications of the GOT User's Manual. Not doing so can cause an electric shock, fire, malfunction or product damage or deterioration.
Ma nuals The following manuals are relev ant to this product. Refer to the following list and order the required manuals. Detailed Manuals Manual name Manual No.
1. Ov erv iew This User's Manual describes the A9GT-BUSSU type Bus connection interface module (hereinafter, A9GT-BUSSU). The A9GT-BUSSU is mounted on the A985GOT(-V)/A975GOT/A970GOT/A960GOT/ A956GOT/A956WGOT (hereinafter, GOT) to PLC system via a bus.
The applicable CPU and sy stem configuration is the same as the conventional bus connection board. Refer to the GOT-A900 Series User's Manual (Connection System Manual) for the configuration of the bus connection system. The A9GT-BUSSU cannot be used together with the bus connection board.
No. Name Description (1) Extension number setting switch Used to set the extension number for GOT assignment. (Factory setting: 0) <Setting range> 1 to 7 : Extension number 8, 9, 0: Must not be used. (2) I/O slot setting switch Used to set the I/O slot number for GOT assignment.
Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi ; machine damage or lost profits caused by faults in the Mitsubishi products; damage, s.
An important point after buying a device Mitsubishi Electronics A9GT-BUSSU-U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics A9GT-BUSSU-U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics A9GT-BUSSU-U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics A9GT-BUSSU-U you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics A9GT-BUSSU-U will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics A9GT-BUSSU-U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics A9GT-BUSSU-U.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics A9GT-BUSSU-U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics A9GT-BUSSU-U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
