Instruction/ maintenance manual of the product KM 6310 Miele
Go to page of 14
Operating and Installation instructions Ceramic Cooktop with induction KM 6310 KM 6344 To prevent accidents and appliance damage, read these instructions before installation or use.
The appliance must be installed by a qualified professional and connected to the electric power supply by a qualified electrician. The cabinet and the hood above the cooktop must be installed before the cooktop to avoid damaging it. ~ The countertop must be heat-resistant (up to 100°C), so that it does not become deformed or the veneer detached.
Clearance above the cooktop For an exhaust hood above the cooktop, always use the clearance specified by the hood manufacturer. If there are no specifications from the hood manufacturer or if flammable materials (e.g. a utensil rail) are installed above the cooktop, the clearance must be at least 760 mm.
62.
Minimum clearance underneath the cooktop To ensure proper ventilation of the cooktop, a minimum clearance is required between the appliance and an oven, protective base, or drawer. The minimum clearance from the bottom of the cooktop to – the top of the oven must be 15 mm .
Safety clearance to a wall covering A safety clearance must be maintained between the countertop cut-out and any wall covering to protect it from heat damage. If the covering is made of a combustible material (e.g. wood), a safety clearance e of 50 mm must be maintained between the cut-out and the covering.
Cooktops with frame or bevelled edges Seal between cooktop and countertop The sealing strip under the edge of the upper part of the cooktop provides an adequate seal against the countertop. The cooktop must not be sealed with joint sealant (e.g. silicone).
KM 6310 a Front b Cooktop height c Connection for Miele | home d Electrical box The connection cable (1440 mm long) comes with the cooktop. Installation dimensions 66.
KM 6344 a Front b Cooktop height c Connection for Miele | home d Electrical box The connection cable (1440 mm long) comes with the cooktop. Installation dimensions 67.
Preparing the countertop ^ For the countertop cut-out use the dimensions given in the illustration. Observe the safety clearances (see Safety instructions for installation). ^ Seal the cut surfaces with a suitable heat-resistant sealant to avoid swelling caused by moisture.
, CAUTION: Before installation or servicing, disconnect the power supply by either removing the fuses, shutting off the power main or manually "tripping" the circuit breakers. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.
In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the appliance.
71.
Alteration rights reserved / 3313 For the most updated manual, visit the Miele web site. M.-Nr. 09 166 590 / 03.
An important point after buying a device Miele KM 6310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Miele KM 6310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Miele KM 6310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Miele KM 6310 you will learn all the available features of the product, as well as information on its operation. The information that you get Miele KM 6310 will certainly help you make a decision on the purchase.
If you already are a holder of Miele KM 6310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Miele KM 6310.
However, one of the most important roles played by the user manual is to help in solving problems with Miele KM 6310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Miele KM 6310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
