Instruction/ maintenance manual of the product 9.21 Microsoft
Go to page of 200
TW AIN Driver Scanner Utility for Microsof t ® Windows ® V ersion 9.18 / 9.19 / 9.21 / 10.10 /10.20 User's Guide P3PC-3942-01ENZ0.
i Introduction Thank you for purchasing the "Scanner Utility for Microsoft ® Windows ® ". This software contains a TWAIN-compliant image sca nner driver (simply called "driver" in this guide) and utilities.
ii When "Windows ® 2000," "Windows ® XP," "Windows Server ® 2003," "Windo ws Server ® 2008," "Windows Vista ® " and "Windows ® 7" are referred to collectively, the y are simply referred to as "Windows ® ".
iii Organization This manual explains how to install and use this driver, and how to use the TWAIN scanning utility. • Installation This section explains the procedure for insta lling the environments in which this driver may operate. • Using the Driver This section explains how to use the driver.
iv Contents 1. Outline .................................................................................................... 1 1.1 Characteristics of this Dr iver .............................................................................. 1 1.
v 4.7.1 Rotation ................................................................................................................... 35 4.7.2 Job/Cache .......................................................................................
vi 7. T roubleshooting .................................................................................. 11 3 7.1 Error Messages ............................................................................................. 113 7.1.1 Messages fr om the TWAIN Driver .
1 1. Outline 1.1 Characteristics of this Driver • This driver complies with TWAIN regulations V2.1, which are global standards for image scanners. The driver can be used in all TWAIN-compliant applications. • This driver also supports an image scanner th at has the "double-sided scan" function.
2 [USB connection] • A personal computer on which one of the following operating sy stems are installed − Windows ® 2000 − Windows ® XP − Windows ® Server ® 2003 − Windows ® Server ® 2008 − Windows Vista ® − Windows ® 7 *Some models are not supported in Wind ows ® 2000.
3 ◊ Terms related to mouse operation Terms related to major mouse operations are explained below. Click: To press and release the mouse left button Double click: To quickly press the mouse left butt.
4 2. TW AIN 2.1 TWAIN TWAIN is the specification that defines the st andard software prot ocol and application programming interface (API) for data exchange be tween a software application program and an image input device such as the image scanner.
5 2.2 TWAIN Application TWAIN mainly applies to the following three software components: Application software Source m anager Source The components are related to each other as shown below.
6 3. Inst allation 3.1 Preparation 1. Make sure that the operating system (OS) is installed correctly. 2. In case of the SCSI connection, confirm that th e SCSI adapter is connected to your PC and operating correctly. In case of the USB connection, confirm that the USB port is installed in your PC .
7 3.2 Installing the Scanner Driver The Windows ® XP screen sample s are shown below. The screen and operations will differ slightly depending on the OS that is being use d. 1. Turn on the scanner. 2. Turn on your PC and Log on to Windows ® . Log on as an administrator.
8 In case of Windows Vista ® , Windows Server ® 2008 and Windows ® 7 3. Insert the Setup DVD-ROM or Setup CD-ROM into the disk drive. <SETUP DISK START UP SCREEN> is displayed. This Dialog is not displayed automatically w hen the "Auto play" setting of the disk drive o n your PC is off.
9 5. Click [TWAIN Driver] (* Depending on the scanner model, the different screen may appear.) Depending on the scanner model, the screen wh ich confirms whether “Error Re covery Guide” and "Image Processing Software Option" are installe d or not is displayed.
10 In case of Windows ® XP/ Window s Server ® 2003/ Windows Server ® 2008/ Windows Vista ® / Windows ® 7 1) [Found New Hardware Wizard] is disp layed, click [Next >] button. Following operation is required for Windows Vista ® , Windows Server ® 2008 and Windows ® 7.
11 2) If [Hardware Installation] is displayed, click [Continue Anyway] b utton. For Windows Vista ® , Windows Server ® 2008 and Windows ® 7, “Windows can’t verify the publisher of this driver software” will appear. Then select “Install this driver software anyway”.
12 3.3 Uninstall The uninstall process removes the software and returns the hard disk to its pre-installation state. When you want to remove this scanner driver program from y our PC, uninstall by the following procedures. 1. Turn on your PC and Log on to Windows ® .
13 4. Using the Driver 4.1 Selecting the Driver To use this driver from the TWAIN applica tion, select "FUJITSU <Product ID>" from the TWAIN data source (driver) selection screen. For general application, the data source selection screen is displayed by selecting the [Select Scanner] or [Acquire .
14 4.2.1 Linkage to Image Processing Softw are Option When the “Enable Software IPC” checkbox is marked after installation of “Im age Processing Software Option” (sold separately or included as a standard function)*, there appears setting items of Image Processing Soft ware Option in a part of the Setting Window for TWAIN Driver.
15 4.3 Displaying Driver Information ♦ Image scanner name The model name, option port name, and capacity of in ternal scanner memory (in units of megabytes) of the connected image scanner are display ed. If no image scanner is connected, this field is blank.
16 4.4 Setting Information on Image Scanning ♦ Current side When a scanner that allows duplex scanning is used, specifies the page which sets the image scanning information.
17 If this checkbox is checked, th e following screen appears. When “Multi Image Output” is selected When “Auto color Detection” is selected - Output mode Multi Image Output One scan outputs both a Color/Grayscale and a Binary B/W image.
18 Primary: Binary Secondary: Color/Grayscale Output images in the order of “Binary B/W image” “Color/Grayscale image”. - Select Current Side When “Multi Image Output” is selected When “Auto color Detection” is selected Select a side and then set the scanning options for it on the main dialog box accordingly.
19 ♦ Resolution Specifies the number of pixels (dots) per inch. Select a predefined resolution or [Custom] from the list. [Customize] enables detail ed settings by a pixel unit.
20 ♦ Paper Size Specifies a document size for scanning. Select a standard size or [Custom] size ( can be registered up to three) from the list. * When you perform a scan in [Carrier Sheet ] size with [Clipping (Front)] or [Clipping (Duplex)] selected for [Scan Type], the imag e is output in Carrier Sheet size without being cropped.
21 Width, Length : To specify a custom paper size, u se the scroll bar or enter the paper size directly. The unit specified in [Option]-[Generic]-[Unit/Scaling] will be applied to the unit in this window. ♦ Scanning Area Specifies the start position, width and length for the image scan.
22 This option can be used only for scanner models that support duplex scanning. The "Duplex Function" requires that the calli ng application supports "continuous scan." If the application does not support "continuous scan," only the data for the front side of the page is passed to the application.
23 * The "Long page" is not displayed in the [S can Type] dropdown list if not supported by the device. See "Relevant Image Sca nner Specification" in the Appendix. * When the scan size is increased, more me mory space is consumed.
24 ♦ Image Mode Selects an image mode for scanning the image. Select a corresponding image mode from the list. Black & White Scans data by using the fixed threshold binar y , black-and-white. Distinguishes black from white by the setting in the "Threshold" of "Scanning Parameter".
25 256 Color Scans data using 256 colors. Data size is smaller than "24 bit Color" selected. Please note that the image quality of "256 Color (8 bit)" is inferior to the case of "24 bit Color ". Choose "24 bit Color" for higher quality.
26 ♦ Halftone Select the halftone pattern for halftone scanning from the built- in pattern list. Select the desired halftone pattern for disp laying the obtained image. This setting is effective when "Halftone", "Automatic Separation" or "SEE (Selective Edge Emphasis)" is selected in "Image Mode".
27 ♦ Scanning Parameters For fine scan adjustments. Since there is no fixed set of values, set by trial and error. ◊ Brightness: Sets the brightness of the overall image. Specify the brightness with a number in th e range of 1 (bright) to 255 (dark).
28 ♦ Prescan While viewing the scanned image on the screen, settings such as brightness and contrast of the scanned image can be finely adjusted. When performing a scan with the [Prescan] checkbox selected, [Image Adjustment Screen] appears after the first page is scanned.
29 ◊ Threshold : Threshold is the criterion that distinguishes black and white colors in B&W im ages. The setting range is from 1 (bright) to 255 (dark). To scan light gray as black, increase the setti ng value. To avoid scanning any unwanted gray, decrease the setting value.
30 ◊ [Restore Default] button Restores the scanner parameter setting values back to what they were when the screen was turned on. ◊ [Continue] button Continues scanning using the adjusted scanning parameters. ◊ [Quit] button Saves the adjusted scanning parameters and stops scanning.
31 4.5 Specifying Driver Operation ♦ [Preview] Scans in a preliminary image based on set values, and displays the image in the preview window. Before actual scanning, the preview function can be us ed to display the entire document for specifying the desired scan area.
32 ♦ [Reset] Restores the current setting values to the stat us immediately after the window is opened. ♦ [Help] Displays online help. When the [F1] key is pressed, help information regarding the item on which the cursor is placed is displayed. Note.
33 4.6 Setting "Scanning Area" Specify the scanning area in the preview window as follows: Setting: 1. Press the left mouse button to specify the origin (top left corner) of the scanning area. (The cursor appears as a "+".) 2. Drag the mouse to show the outline of th e scanning area.
34 4.7 Setting Options The "option dialog" is used to set device-specific functions and the item s that differ depending on whether the scanner used supports them.
35 The options are described below: 4.7.1 Rotation (For V9.18 / 9.19 / 9.21 / 10.20) (For V10.10) Figure Option dialog (Rotation).
36 ♦ Flip Side Rotation Specifies the binding of the document when both sides are scanned using ADF. Book Outputs the scanned image for both sides as is. Select this option to scan documents bound on the left or right side Fanfold Outputs the scanned image of the backside rotated 180 degrees.
37 ♦ Rotation Degree Outputs the scanned image rotated to the right or left 90 degrees. 0.0 degree Outputs the scanned image as is. 90.0 degree Outputs the scanned image rotated 90 degrees to the right (clockwise). -90.0 degree Outputs the scanned image rotated 90 degrees to the left (counterclockwise).
38 * The image orientation may not be corrected properly depending on the driver setting at scanning. * If you cannot correct the image orientation properl y , use the Edge Emphasis function of the driver to correct it. * This function does not work properly for some applications.
39 Automatic Size and Skew detection Disable This option outputs the image as it was scanned. End of Page Detection Scanning with the ADF and page length detec tion selected will output data for the page size detected. The image data output will adjust to the page length detected for each page inclu ding smaller size pages.
40 White Background Use it to activate "Overscan". Both [White Background] and "Overscan" need to be selected for making Overscan effective. If "Overscan" is not selected, [White Background] functions the same as [Disable].
41 The output order of the back side images scanned in Duplex mode. When "Book" is selected under [Flip Side Rotation] Third page : The upper half on the back side Fourth page : The lower ha.
42 * This option may not be supported for some scanners. See "Relevant Image Scanner Specification" in the Appendix. Note. When [Double-p age spread] is selected, Option di alog (Rotation) is not displayed.
43 4.7.2 Job/Cache Figure Option dialog (Job/Cache) ♦ Caching Specifies whether to pre-read (cache) when a document is scanned. This option enables faster scanning. If processing of the application being used sl ows down and scanning stops, this option can be used to prevent degradation of the scanning speed.
44 Ram cache Prereads the allowable amount based on the allocated memory size and stores the data in PC memory. A memory size between 1 and 200 MB can be set. Use Memory on Scanner Pre-reads using the memory installed in the scanner (displayed only if supported by the scanner).
45 ♦ Multifeed Detection This option detects a multifeed (occurs when two or more documents are sent) based on the set condition. If a multifeed is detected when this setting has been turned on, the device will stop and an error message output.
46 ♦ Show Multifeed Image Views the image where a multifeed is detected . You can specify either to stop or to continue the scanning. * Depending on the settings during scanning, the image on the show multifeed image window may be different than output the image.
47 ♦ Pre-Pick It specifies whether a document is picked and carried in front of the scanning position before starting scanning operation at the ADF scanning. This function cannot be used when [Double-pa ge spread] , [Clipping (Front)] or [Clipping (Duplex)] is selected.
48 Some scanner models do not support this function. See "Relevant Image Scanner Specification" in Appendix. ♦ Blank page skip This option skips blank pages (blank pa ges or completely black pages) during ADF continuous scanning. Marking this check box, this function is enabled.
49 <If blank page skip does not operate properly> − If a blank page is scanned, increase the value set. − If scanning is skipped up to the required document, decrease the value set. This function is available only when "Ram cache" or "Use Both Memory" is selected as "Caching" setting.
50 4.7.3 Generic Figure Option dialog (Generic) ♦ Unit/Scaling This option selects the unit for the scanning area and preview window. One inch is calculated as 25.4 millimeters. When inches are converted to millimeters, values are rounded off. Note.
51 4.7.4 Imprinter (Endorse) Figure Option dialog (Imprinter) ♦ Enable Imprinter (Endorse) Specifies enabling or disabling the imprinter function of the device. When the option is selected, the scanned doc uments are imprinted according to the instructions below.
52 * [Pre-Imprinter] and [Post-Imprinter] cannot be used at the same time. Frontside Imprinter (Printing after scanning, and on the front side of docum ents) Prints on documents using the frontside imprinter. In this case, it prints on the front side of the document after scanning.
53 ♦ Bold The imprinter string is outputted with bol d font. Available settings vary depending on your scanner. Refer to “Relevant Image Scanner Specification” in the Appendix. ♦ Initial Value (Counter) Designates the initial count when the Imprinter St ring is set, including a counter value.
54 The following definitions can be used. They may also be selected from the menu, which is displayed by clicking on " ". %YYYY : The y ear is printed in four digits using the Western calendar. %YYY: The year is printed using t he two dig its of the Japanese calendar (current, or Heisei era).
55 Note. ・ When scanning in Duplex mode with this setti ng enabled, the digital endorser only prints on the front side of the document. ・ This setting cannot be enabled when Multi Image Ou tput, Auto Color Detection or Split Image is specified. ・ This setting synchronize s the default endorser strings of imprinter and digital endorser.
56 4.7.5 Start Up Set up the Po wer Mode, Low-Speed Feeding and Scanner Operation Panel. In some scanner models, displayed dialog bo x or setup item may be different or even [Startup] dialog box ma y not be displayed.
57 In case of model fi-5750C Figure Option dialog (Start Up) In case of model fi-5650C Figure Option dialog (Start Up).
58 In case of model fi-5900C / fi-5950 Figure Option dialog (Start Up) In case of model fi-6130 / fi- 6140 / fi-6230 / fi-6240 Figure Option dialog (Start Up).
59 In case of model fi-6670(A) Figure Option dialog (Start Up) In case of model fi-6770(A)/6750S Figure Option dialog (Start Up).
60 In case of model fi-6110 Figure Option dialog (Start Up) In case of model fi-6800 Figure Option dialog (Start Up).
61 ♦ Power Mode Quick Start Mode This mode keeps the lamp on regardless the scanner’s operating condition, which saves times for lamp to become steady. Low Power Mode To save the power consumption, this mode turns the lamp off, if the scanner is not operated for 14 minutes.
62 This setting is valid when both “Enable S canner Panel” and this checkbox are checked. With this density dial, the density can be set by five levels. If moving the density dial to the UP direction, the density changes [N ormal] >>[Darker scanning]>>[Dark scanning].
63 4.7.6 Filter Set the filter processing in this dialog. The filter name is displayed in the list box. While checking the checkbox in the left of the filter name, the filter processing is applied to scanned image. When selecting a filter name and clicking [Propert y] button, the setting dialog of the filter is displayed.
64 Color Select a color to paint over the image frame. Can select "White" or "Black". Please specify either white or black to matc h the background color of the document.
65 Printing Specify the beginning position of the character string to out put on the scanned image data. X Offset: Specify the position of the width directio n from the left end of document. Y Offset: Specify the position of t he length direction from the top of document.
66 %HH: The hour is printed usi ng two digits of the 24-hour clock; f or example, 08 for 8:00 a.m. an d 14 for 2:00 p. m. %H: The hour is printed using one or two digits of t he 24-hour clock; for e xample, 8 for 8:00 a.m. an d 14 for 2 :00 p.m. %NN: The minute is printed using t wo digits; for exam ple, 02 for 8:02 a.
67 4.7.7 Compression Click this tab and m ark the check box to en able or disable JPEG compression for data transfer from the image scanner. (This func tion is available only for Color or Gray scale scans.) This function cannot be used when [Do uble-page spread] is selected.
68 4.8 Setting Advance Options The "advance dialog" is used to set items relate d to image processing. The settings apply to device-specific functions and items that differ according to whether the scanner used supports them.
69 The options are described below: 4.8.1 Gray Figure Advance dialog (Gray) ♦ Gamma Pattern This option corrects distortions from nonlinear image representation. Scanner sensors are generally designed to generate output linear to the density of the light reflected from the document.
70 If the gamma pattern download file has not been re gistered in the list of file names, use the [Add] button to register the file. See "Download Pattern File" for inform ation about how to specify the file. When "Custom" is selected, a custom specification can be entered.
71 If [Custom Pattern 1 – 3] is selected, the following screen appears. Original Image A color sample will be shown. The dropout color can be selected by clicking the desired color with your mouse. Dropout Image An image without the dropout color will be shown.
72 Sensitivity Specifies tolerance of the selected color to be dropped out. Specifiable range: 15 to 180 degrees (default: 15 degrees) Larger the value becomes, wider the color gamut is to be dropped out. [File] button Displays arbitrary image files (24-bit color bmp format) on the “Original Image”.
73 4.8.2 Image Filter Figure Advance dialog (Image Filter) ♦ Edge Processing This option specifies the sharpness of a scanned image. Select "None", "Edge Extract", "Smoothing (Backgr ound Removal)" or "Emphasis".
74 Emphasis This option outputs an image with the edge em phasized. "Emphasis High", "Emphasis Mid", or "Emphasis Low" can be selected. If "Emphasis High" is selected, the image becomes sharper. If "Emphasis Low" is selected, the image appears less distinct.
75 4.8.3 DTC This option is valid only when "DTC Variance" is set. Figure Advance dialog (DTC Mode) ♦ Scan mode This option selects one of the following two scan modes: [for OCR]: This mode is for text recognition app lications where irregularity in the image is undesirable.
76 ♦ Threshold Curve This option specifies the relationship between th e threshold value and the maximum density. The specification method depends on the [ Scan mode] setting. In [for OCR] mode, use the scroll bar to set the inclination and dens ity level between 0 and 5.
77 ♦ Ball-Point Pen Mode When an image made with a pencil or ball-point pen is scanned, the light reflected from the pencil lead or ink is not uniform.
78 Figure Advance dialog (DTC Mode) <IPC-3/3D and IPC-4D installed>.
79 4.8.4 When Color (/Grayscale) is specified For color scanners, when “Color” is selected in the [Image Mode], the [Advance] dialog changes as follows. And in case of some co lor scanners, when sele cting “Grayscale” the [Advance] dialog change as same as selecting “Color”.
80 ♦ Contrast/Brightness (Color / Grayscale) Contrast : Sets the contrast of light and shadow in a scanned image. Specify the contrast with a number in the range of 1 (low [s oft]) to 255 (high [sharp]). If this value is increased, the dark part of the image is shown darker and the light part is shown lighter.
81 When "Download Pattern" is selecte d, the above dialog bo x opens. Select the gamma pattern download file to be u sed from the list of file names. Then, press the [OK] button. Correction will then be executed using the selected gamma patt ern.
82 <Image Mode : C olor selecte d> <Ima ge Mode : Graysc ale selecte d> Figure Advance dialog ([Quality] / [Gray] tab) ♦ Image Emphasis (Color only) This option specifies the sharpness of a scanned image. Select "None", "De-Screen" or "Emphasis".
83 ♦ White Level Follower (Color) Select this option to scan a document who se background color is not white, such as a newspaper. Select "Auto", "Enable", or "Disable". When "Enable" is selected, the document is scanned using background follow-u p (for line drawings).
84 If [Custom Pattern 1 – 3] is selected, the following screen appears. Original Image A color sample will be shown. The dropout color can be selected by clicking the desired color with your mouse. Dropout Image An image without the dropout color will be shown.
85 Sensitivity Specifies tolerance of the selected color to be dropped out. Specifiable range: 15 to 180 degrees (default: 15 degrees) Larger the value becomes, wider the color gamut is to be dropped out. [File] button Displays arbitrary image files (24-bit color bmp format) on the “Original Image”.
86 4.9 Setting the Setting Manager Options These options are used to manage the setting files, and switch the basic scan dialog display. Press the [Config.
87 ♦ FTS File Information The information of the setting file selected in [Setting Files] is displayed. ♦ [Show this dialog next open] checkbox If this checkbox is checked, [Basic Scan Dialog] will be activated the next tim e the driver is activated.
88 ♦ [Delete] button Deletes unnecessary setting files. Select the setting file to be deleted and then press the [Delete] button. A confirmation dialog will be displayed. Press the [OK] butto n to delete the setting file. To cancel, press the [Cancel] button.
89 4.10 Basic Scan Dialog The basic scan dialog contains only the minimum functions required for scanning. The detailed setting functions of the main dialog have been omitted.
90 ♦ FTS File Information The contents of the selected file are displayed. ♦ [Scan] button Executes scanning based on the contents of the setting file. ♦ [OK] button Terminates without performing the scan operation. ♦ [Adjust] button Switches from the basic scan dialog to the main dialog.
91 4.11 Download Pattern File The "download pattern file" of this driver is a f ile that defines the patterns to be used by the scanner to execute various image processing. This file is available in the following two versions. Each version can be selected using the [Download Selection Dialog] that opens when [Download] is selected.
92 Example: In case of 8x8 matrix 8, 8, 128, 128, 128, 128 , 128, 128, 128, 128, 255, 128, 128, 128 , 128, 128, 128, 128, 255, 255, 128, 128 , 128, 128, 128, 128, 255, 255, 255, 128 , 128, 128, 128, 1.
93 ♦ Gamma download pattern file Any user defined gamma correction processi ng can be performed by downloading the pattern from the gamma download file to th e scanner. The defined pattern becomes effective when [Download Pattern] is selected for [Gamma Pattern].
94 Example 256, 256, 255, 254, 253, 252 , 251, 250, 249, 248, 247, 2 46, 245, 244, 243, 242, 241, 240, 239 , 238, 237, 236, 235, 234, 2 33, 232, 231, 230, 229, 228, 227, 226 , 225, 224, 223, 222, 221,.
95 5. Using the Gamma Pattern Editor 5.1 Start-up Click on [Start] and select [Gamma Pattern Editor] from "Scanner Utility for Microsoft Windows" under [Programs] .
96 5.2 [File] menu ♦ [Load...] This menu is used to read th e Gamma Download file and display the graph and gradations. The name of the open file is displayed above the grap h area. ♦ [Save] The gamma pattern currently being edited is saved in the file whose name is displayed above the graph area.
97 5.4 Gamma Pattern Editing ♦ Graph Area The graph area is a 256-dot x 256-dot white square area bordered by black lines, where the relationship between the input values of 0 to 2 55 ( x axis) and output values of 0 to 255 (y axis) is indicated in blue lines.
98 6. Setting Scanner and Camera Properties 6.1 Displaying Scanner and Camera Properties Double-click the [Scanner and Camera] icon on the [Control Panel] to display th e corresponding Properties dialog box. If the scanner driver has been properly installed, the icon of your scanner is displayed.
99 6.3 Events Tab On the Events tab, an application can be specified to be started automatically by “Scanner events” such as “pushing buttons on the scanner”. (The Events tab is not displayed if the device does not support this function.) ♦ Select an event Select a “scanner event” from the list box to start an application.
100 In Windows ® 2000 or some scanner driver, the follo wing “ Events ” screen may be displayed. (This screen has the same function as the above screen.) ♦ Select an event Select a “scanner event” from the list box to st art an application.
101 6.4 Diagnostic Tab To perform more detailed diagnostic tests than those provided in the general tab folder, click the [Diagnose] button. Only a user who has administrator authority can run these tests. (The Diagnostic tab is not displ ayed if the device does not support this function.
102 6.5 Device Information Tab A list of the functions compatible with the selected scanner driver is displayed. The items displayed depend on the selected model of scanner. Only hardware functions are displayed. The functions realized by software are not displayed in this tab folder.
103 6.6 Device Setup Tab Information related to the operation and maintena nce of the scanner driver can be displayed and set up. For some scanner models, this tab may not b e displayed, or some items cannot be set up (grayed out). Changing the setup activates the Apply button.
104 When using a scanner, the following message may be displayed. If this message appears, replace consuma b les following the instructions below. < If replacing consumables immediately > 1. Check [This message not display again.] * Skip this operation for some models, as this function is not su pported by the driver.
105 ♦ [Power saving mode] button This specifies the power saving mode. If this button is clicked, the following dialog box is displayed. − Quick Start Mode This mode keeps the lamp on regardl ess the scanner’s operating condition, which saves times for lamp to beco me steady.
106 Enable (Detection Area Selection) Vertically select an area where multifeed detection will or will not be conducted. Choose either “Select area for applying Mu ltifeed Detection” or “Select area for not applying Multifeed Detection”. − Select area for applying Multifeed De tection Select an area for multifeed detection.
107 ♦ [Offset] button When this button is clicked, the fo llowing dialog box is displayed. Using this dialog box, the offset of the leading edge and magnification for the sub -scanning direction can be changed. − Offset Setting: If the position of the scanned image shifts from the original document, fine adjustment is possible.
108 − [OK] button The adjusted value is written to the EEPROM. * This button may not be displayed depending on the scanner model. The available settings also vary depending on the scanner model. (e.g. For fi-6130, only the setting of the ADF part can be changed) Changing this setting affects scanning oper ation of the scanner device greatly.
109 6.7 About Tab The version of this driver and a link to the Fujitsu home page are displayed. (The About tab is not displayed if the device does not support t his function.) (In version 10.10 or later, this tab is not displa y ed.) 6.8 Color Management Tab Color profiles assigned to the device can be added or deleted from this folder.
110 6.9 Scanning by using “Scanner and Camera Wizard” In case of Windows ® XP / Windows Server ® 2003, you can scan by using “Scanner and Camera Wizard”. (* It functions w hen scanning with supported scanner. ) Follow below procedure to scan: 1.
111 5. Specify a file name, a format and a place to save scanned images. And click [Next] button. Scanning starts. (The following window is displayed during scanning.) 6. Select an item of “What do you want to do?” to keep working with your picture.
112 8. Click [Finish] button to finish this wizard..
113 7. T roubleshooting 7.1 Error Messages 7.1.1 Messages from the TWAIN Driver • The input value is outside the range. (DS00001) Cause: A value exceedi ng the range allowed for an input item was input. R esolution: Input a value within the allowed range.
114 • The value for custom paper is higher than the m aximum sc an size. Width needs to equal 279 mm or less and length needs to equal 420 mm or less. (DS00005) • The value for custom paper is higher than th e m aximum sc an size. Width needs to equal 11 inch or less and length needs to equal 16.
115 • Cannot specify Gray Scale with duplex document. (DS00011) Cause: Duplex scanning is specified with Gray Scale specified. R esolution: At duplex scanning, select Black/white binary or Half tone for the [Image type]. • Cannot specify Individual Setting with Gray Scale.
116 • Description not specified. (DS00022) Cause: The description of the setti ng file has not been specified. R esolution: Enter the description of the setti ng file in the description field. Then, try scanning again. • Filename not specified. (DS00023) Cause: The filename of the setting file has not been specified.
117 • The specified image scanner is being used. (DS41005) Cause: The image scanner may be already in use by another application, or the TWAIN driver may have been started twice. R esolution: After all applications are te rminated, restart the image scanner for scanning.
118 • No paper on ADF paper chute or Hopper. (DS32003) Cause: Although ADF was selected as the paper feeding method, no paper is found on ADF paper chute or Hopper. R esolution: Select another paper feeding method or set the document on ADF paper chute or Hopper.
119 • Anomaly in the command for communicating with the scanner. (DS00003) • Anomaly in communication with the scanner. (DS42050) Cause: The SCSI cable is not connected firmly or is disconnected. R esolution: Confirm the cable connection. If the cable is disconnected, replace the cable with new one.
120 • The Multifeed is detected. (DS32006) Cause: The papers are scanned with multifeeding. (One paper stuck to another) R esolution: Remove the papers stopped by multifeeding, and reset them. • Insufficient memory. (DS41001) Cause: There is not enough memory fo r tasks such as scanning and im age processing.
121 • Mini Driver not found. ( DS41012) Cause: The Mini driver may not have been installed, or may have been deleted. R esolution: Install the mini-port driver following the instructions mentioned in “3.2 Installing Scanner Driver”. • Scanner DLL file not found.
122 • A general fault of the DAT_XXXXX, MSG_ SET, and unsupported type response. (Internally) Cause: This is a program error that us ually occurs while making the internal data settings. R esolution: Contact the place of purchase or your nearest maintenance and service center.
123 • It is about time to replace the consumable . Please replace XXXXX in paper feeder if the feeding capability is deteriorated. (DS42003)(DS42005 or DS42017)(DS4200 7)(DS42008) Cause: The consumable displayed in “XXXXX” needs to replace. R esolution: Replace the consumable disp layed in “XXXXX” as soon as possible.
124 7.1.2 Error messages relating to gamma correction pattern editing • Enter a positive decimal value. Cause: A value other than a number has been entered as the gamma correction value. Alternatively, 0 or a negative value has been entered. R esolution: Reenter a valid value.
125 7.2 Device Trouble Related to Operation • The [Scan] button is pressed, but scanning is not performed. Cause: Has the scanner power been tu rned on? Has the SCSI cable been connected correctly? Has the correct device type been selected using [Select TWAIN Input Device]? • The scanner appears to be operati ng, but no image is displayed.
126 7.3 Device Trouble Related to Installation • Cannot install the driver. (The installation is stopped on the wa y .) Cause: Is the older version TWAIN Driver .installed in your PC? R esolution: Please install the driver after uninstalling the old versions.
127 8. Appendix 8.1 Relevant Image Scanner Specification Product: fi-4340C (Driver version: 9.18) Type : Desktop Image sensor : Color CCD, Reduced optical system Operating method : Document fixed Flat.
128 Scanning area specification : Specified (one location) White level follower : Enabled Brightness / Threshold / Contrast : 255 steps High light / Shadow : 255 steps (at Color / Grayscale scanning) .
129 Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function : Disabled Batch Detection : Enabled Multifeed detection : Enabled (Check thickness / length) Show Multifeed Image : Disabled Pre-P.
130 Product: fi-4860C2 (Driver version: 9.18) Type : Desktop Image sensor : Reduced optical system Operating method : Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scann.
131 Gamma pattern : Normal / Soft / Sharp Image processing function : Dynamic Threshold (SDTC, DTC), Edge emphasis, Edge extraction, Automatic separation, Mirror image(Black & White only), 256 Col.
132 Show Multifeed Image : Disabled Pre-Pick : Enabled Check Over-skew : Enabled Paper Protection : Disabled Blank page skip : Enabled JPEG Transfer (Hardware Compression) : Enabled Filter : Page Edge.
133 Product: fi-5015C (Driver version: 9.19) Type : Desktop Image sensor : Reduced optical sy stem Operating method : Document fixed Flat bed, Automatic Document Feed (ADF), Single-sided reading Light.
134 Individual setting : Disabled Multi Image : Disabled Imprinter (Endorse) : Disabled Interface : USB 1.1 / 2.0 Prescan : Disabled Preview : Disabled Flip Side Rotation : Disabled Rotation : Enabled.
135 Cropping with Carrier Sheet : Disabled <Other functions> Operator Panel setting : [Scan] / [Send to] button Device set : Consumables replace (Pad / Pick Roller counter clear) Offset setting,.
136 Product: fi-5110C (Driver version: 9.21) Type : Desktop Image sensor : Color CCD (Reduced optical sy stem) Operating method : Automatic Document Feed (ADF), Simultaneous double- sided scanning 1 ,.
137 High light / Shadow : 255 steps (at Color / Grayscale scanning) Gamma pattern : Norm al / Custom / Bright Image processing function : Simplified Dynamic Threshold (SDTC), Edge em phasis, De-Screen.
138 JPEG Transfer (Hardware Compression) : Enabled Filter : Page Edge Filler, Digital Endorse Drop out color : Enabled sRGB output : Disabled Use Image Processing Software Option : Enabled (sold separ.
139 Product: fi-5120C (Driver version: 9.21) Type : Desktop Image sensor : Color CCD (Reduced optical system) Operating method : Automatic Document Feed (ADF), Simultaneous double- sided scanning, Lon.
140 Gamma pattern : Normal / Custom / Bright Image processing function : Simplified Dyna mic Threshold (SDTC), Advanced DTC, Edge emphasis, Edge smoothing, De-Screen, 256 Color, 8 Color, 4bit Grayscal.
141 Multifeed detection : Enabled (Check overlappin g / length, Area selection) Show Multifeed Image : Disabled Pre-Pick : Disabled Check Over-skew : Disabled Paper Protection : Disabled Blank page sk.
142 Product: fi-5220C (Driver version: 9.21) Type : Desktop Image sensor : Color CCD (Reduced optical sy stem) Operating method : Document fixed Flat bed (FB), Automatic Document Feed (ADF), Simultane.
143 Brightness / Threshold / Contrast : 255 steps High light / Shadow : 255 steps (at Color / Gray scale scanning) Gamma pattern : Normal / Custom / Bright Image processing function : Simplified Dyna .
144 Paper Protection : Disabled Blank page skip : Enabled JPEG Transfer (Hardware Compression) : Enabled Filter : Page Edge Filler, Digital Endorse Drop out color : Enabled sRGB output : Enabled Use I.
145 Product: fi-5530C (Driver version: 9.21) Type : Desktop Image sensor : Color CCD Operating method : Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (Resolutio.
146 Brightness / Threshold / Contrast : 255 steps High light / Shadow : 255 steps (at Color / Grayscale scanning) Gamma pattern : Normal / Custom / Bright Image processing function : Simplified Dyna m.
147 Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function : Disabled Batch Detection : Disabled Multifeed detection : Enabled (Check overlapping / length, Area selection) Show Multifeed Ima.
148 Product: fi-5530C2 (Driver version: 9.21) Type : Desktop Image sensor : Color CCD Operating method : Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (Resoluti.
149 Brightness / Threshold / Contrast : 255 steps High light / Shadow : 255 steps (at Color / Gray scale scanning) Gamma pattern : Normal / Custom / Bright Image processing function : Simplified Dyna .
150 Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function : Disabled Batch Detection : Disabled Multifeed detection : Enabled (Check overlapping / length, Area selection) Show Multifeed Ima.
151 Product: fi-5650C (Driver version: 9.21) Type : Desktop Image sensor : Color CCD + Reduced optical sy stem Operating method : Automatic Document Feed(ADF), Simultaneous double-sided scanning Long .
152 High light / Shadow : 255 steps (at Color / Gray scale scanning) Gamma pattern : Normal / Soft / Sharp / Download Pattern / Custom / Bright Image processing function : Simplified Dynamic Threshold.
153 Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function : Enabled Batch Detection : Enabled Multifeed detection : Enabled (Check overlapping / length) Show Multifeed Image : Disabled Pre-.
154 Product: fi-5750C (Driver version: 9.21) Type : Desktop Image sensor : Color CCD + Reduced optical sy stem Operating method : Document fixed Flat bed(FB), Automatic Document Feed(ADF), Simultaneou.
155 White level follower : Enabled Brightness / Threshold / Contrast : 255 steps High light / Shadow : 255 steps (at Color / Gray scale scanning) Gamma pattern : Normal / Soft / Sharp / Download Patte.
156 Pre-Pick : Enabled Check Over-skew : Disabled Paper Protecti on : Disabled Blank page skip : Enabled JPEG Transfer (Hardware Compression) : Enabled Filter : Page Edge Filler, Digital Endorse Drop .
157 Product: fi-5900C (Driver version: 9.21) Type : Desktop Image sensor : Reduced optical system Operating method : Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanni.
158 Brightness / Threshold / Contrast : 255 steps High light / Shadow : 255 steps (at Color / Grayscale scanning) Gamma pattern : Normal / Soft / Sharp / Download Pattern / Custom / Bright Image proce.
159 Split Image : Disabled Overscan : Enabled (when “Black Background” is selected) Cutting out Size : Disabled Buffer scan ([Use Memory on Scanner]) function : Enabled Use Both Memory ( [Ram Cach.
160 <Other functions> Operator Panel setting : [Scan] / [Send to] button Prefer Scanning Speed setting : Enabled Device set : Consumables replace (Pad / Pick Roller / Break Roller / Separator Ro.
161 Product: fi-5950 (Driver version: 10.10) Type : Desktop Image sensor : Reduced optical system Operating method : Automatic Document Feed (ADF), Simultaneous double- sided scanning, Long page scann.
162 Gamma pattern : Normal / Soft / Sharp / Download Pattern / Custom / Bright Image processing function : Dynamic Threshold (SDTC), Advanced DTC, Edge emphasis, Edge extraction, De-Screen, SEE (Selec.
163 Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function : Enabled Batch Detection 1 : Enabled Multifeed detection : Enabled (Check overlapping / length) Show Multifeed Image : Disabled Pr.
164 Product: fi-60F (Driver version: 9.21) Type : Desktop Image sensor : LED(RGB) + Reduced optical sy stem Operating method : Document fixed Flat bed(FB) Light source : LED (R, G, B) Basic resolution.
165 Flip Side Rotation : Disabled Rotation : Enabled Punch hole removal : Disabled Automatic Size and Skew detection : Automatic Page Size Detection Split Image : Disabled Overscan : Disabled Cutting .
166 Product: fi-6110 (Driver version: 10.20) Type : Desktop Image sensor : Color CCD (Reduced optical sy stem) Operating method : Automatic Document Feed (ADF), Simultaneous do uble- sided scanning, L.
167 Gamma pattern : Normal / Soft / Sharp / D ownload Pattern / Custom / Bright Image processing function : Simplified Dyna mic Threshold (SDTC), Advanced DTC, Edge emphasis, Edge smoothing, De-Screen.
168 Use Image Processing Software Option : Enabled (sold separately ) Double-page spread with Carrier Sheet : Enabled Cropping with Carrier Sheet : Enabled <Other functions> Operator Panel setti.
169 Product: fi-6130 (Driver version: 9.21) Type : Desktop Image sensor : Color CCD (Reduced optical sy stem) Operating method : Automatic Document Feed (ADF), Simultaneous do uble- sided scanning, Lo.
170 Gamma pattern : Normal / Soft / Sharp / D ownload Pattern / Custom / Bright Image processing function : Simplified Dyna mic Threshold (SDTC), Advanced DTC, Edge emphasis, Edge smoothing, De-Screen.
171 Paper Protecti on : Disabled Blank page skip : Enabled JPEG Transfer (Hardware Compression) : Enabled Filter : Page Edge Filler, Digital Endorse Drop out color : Enabled sRGB output : Enabled Use .
172 Product: fi-6140 (Driver version: 9.21) Type : Desktop Image sensor : Color CCD (Reduced optical sy stem) Operating method : Automatic Document Feed (ADF), Simultaneous do uble- sided scanning, Lo.
173 Gamma pattern : Normal / Soft / Sharp / D ownload Pattern / Custom / Bright Image processing function : Simplified D ynam ic Threshold (SDTC), De-Screen, Edge emphasis, 256 Color, 8 Color, 4bit Gr.
174 Multifeed detection : Enabled (Check overlapping / length, Area selection) Show Multifeed Image : Disabled Pre-Pick : Enabled Check Over-skew : Disabled Paper Protecti on : Enabled Blank page skip.
175 Product: fi-6230 (Driver version: 9.21) T yp e : Deskto p Ima g e senso r : Color CCD ( Reduced o p tical s y stem ) Operating method : Document fixed Flat bed (FB), Automatic Document Feed (ADF),.
176 Brightness / Threshold / Contrast : 255 steps High light / Shadow : 255 steps (at Color / Gray scale scanning) Gamma pattern : Normal / Soft / Sharp / D ownload Pattern / Custom / Bright Image pro.
177 Drop out color : Enabled sRGB output : Enabled Use Image Processing Software Option : Enabled (sold separately ) Double-page spread with Carrier Sheet : Enabled Cropping with Carrier Sheet : Disab.
178 Product: fi-6240 (Driver version: 9.21) Type : Desktop Image sensor : Color CCD (Reduced optical sy stem) Operating method : Document fixed Flat bed (FB), Automatic Document Feed (ADF), Simultaneo.
179 Brightness / Threshold / Contrast : 255 steps High light / Shadow : 255 steps (at Color / Gray scale scanning) Gamma pattern : Normal / Soft / Sharp / Download Pattern / Custom / Bright Image proc.
180 Paper Protecti on : Disabled Blank page skip : Enabled JPEG Transfer (Hardware Compression) : Enabled Filter : Page Edge Filler, Digital Endorse Drop out color : Enabled sRGB output : Enabled Use .
181 Product: fi-6670/fi-6670A (Driver version: 9.21) Type : Desktop Image sensor : Color CCD + Reduced optical sy stem Operating method : Automatic Document Feed(ADF), Simultaneous double-sided scanni.
182 White level follower : Enabled Brightness / Threshold / Contrast : 255 steps High light / Shadow : 255 steps (at Color / Gray scale scanning) Gamma pattern : Normal / Soft / Sharp / Download Patte.
183 Buffer scan ([Use Memory on Scanner]) function : Enabled Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function : Enabled Batch Detection : Enabled Multifeed detection : Enabled (Check o.
184 Product: fi-6750S (Driver version: 9.21) Type : Desktop Image sensor : Color CCD + Reduced optical system Operating method : Document fixed Flat bed(FB), Automatic Document Feed(ADF) Long page sca.
185 Image processing function : Simplified Dynam i c Threshold (SDTC), Edge emphasis, Edge extraction, De-Screen, SEE (Selectable Edge Enhancement), Reverse image (at Black & White, Gray scale), 2.
186 Product: fi-6770/fi-6770A (Driver version: 9.21) Type : Desktop Image sensor : Color CCD + Reduced optical sy stem Operating method : Document fixed Flat bed(FB), Automatic Document Feed(ADF), Sim.
187 White level follower : Enabled Brightness / Threshold / Contrast : 255 steps High light / Shadow : 255 steps (at Color / Gray scale scanning) Gamma pattern : Normal / Soft / Sharp / Download Patte.
188 Filter : Page Edge Filler, Digital Endorse Drop out color : Enabled sRGB output : Enabled Use Image Processing Software Option : Enabled (included as a standard function) Double-page spread with C.
189 Product: fi-6800 (Driver version: 10.10) Type : Desktop Image sensor : Reduced optical system Operating method : Automatic Document Feed (ADF), Simultaneous double- sided scanning, Long page scann.
190 Image processing function : Dynamic Threshold (SDTC), Advanced DTC, Edge emphasis, Edge extraction, De-Screen, SEE (Selectable Edge Enhancement), Reverse image, 256 Color, 8 Color, 4bit Grayscale .
191 Show Multifeed Image : Enabled Pre-Pick : Enabled Check Over-skew : Disabled Paper Protection : Enabled Blank page skip : Enabled JPEG Transfer (Hardware Compression) : Enabled Filter : Page Edge .
192 8.2 Maintenance Service This section explains briefly how you can help us t o provide you with high-quality maintenance service. Since it is practically impossible for the Fujitsu service staff to.
TWAIN Driver “Scanner Utility for Microsoft ® Windows ® ” User’s Guide <32 bit / 64bit version> First Edition August 2011 © PFU LIMITED 2011 The contents of this document m ay ch ange for improvements without prior notice.
An important point after buying a device Microsoft 9.21 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Microsoft 9.21 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Microsoft 9.21 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Microsoft 9.21 you will learn all the available features of the product, as well as information on its operation. The information that you get Microsoft 9.21 will certainly help you make a decision on the purchase.
If you already are a holder of Microsoft 9.21, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Microsoft 9.21.
However, one of the most important roles played by the user manual is to help in solving problems with Microsoft 9.21. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Microsoft 9.21 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
