Instruction/ maintenance manual of the product FVR206 Abocom
Go to page of 10
M73 - APO09 - 380 Firewall VPN R outer Quick Install ation Guide.
- 1 - Firewall VPN Router Overview The Firewall V PN Router provides three 10/100Mbit Ethernet network interface ports which are the Internal/LAN, External/WAN, and DMZ port. It also provides an easily operated s oftware WebU I that allows users to set system parameters or monitor network activities using a web browser.
- 2 - Firewall VPN Router supporting protocols The Firewall VPN Router supports all the TCP, UDP and ICMP protocols, such as HTTP, TELNE T , SMTP, POP3, FTP, DNS, PING, etc. System Administrators can set up proprietary protocols according to operating requirements.
- 3 - Connecting Example: Firewall: Internal Port = 192.168.1.1 External Port = x.x.x.x (pr ovided by ISP) DMZ Port = 172.16.1.254 Connection Type: 10/100 Mbps Cable Connection 【 Internal 1 Port 】 = 192.168.1. 3 【 Internal 2 Port 】 = 192.168.1.
- 4 - 【 External Port 】 = 61.11.11.11 【 DMZ Port 】 = 172.16.1.254 Firewall VPN Router Software (management tool) description Firewall VPN Router management tool : WebUI The main menu functions are located on the left - hand side of the screen, and the display window will be on the right - hand side.
- 5 - Quick Setup WebUI Configuration example STEP 1: Connect both the Administrator ’ s PC and t he Internal (LAN) port of the Firewall VPN Router Firewall to a hub or switch. Make sure there is a link light on the hub/switch for both connections. The Firewall VPN Router has an embedded web server used for management and configuration.
- 6 - STEP 2 ： Once the Administrator PC has an IP address on the same network as the Firewal l VPN R outer , open up an Internet web browser and type in http://92.168.1.1 in the address bar. A pop - up screen will appear and prompt for a username and password.
- 7 - STEP 3 : After entering the usernam e and password, the Firewall VPN Router WEBUI screen will display. Select the Configuration tab on the left menu and a sub - function list will be displayed. Click on Interface from the sub - function list, and enter proper Layer 3 network setup information.
- 8 - STEP 4 ： Click on the Policy tab from the main function menu, and then click on Outgoing from the sub - function list. Click on New Entry button.
- 9 - STEP 5 ： The configuration is successful if you see the screen below. Make sure that all the computers that are connected to t he Internal (LAN) port have their Default Gateway IP Address set to the Firewall ’ s Internal IP Address (i.e. 192.
An important point after buying a device Abocom FVR206 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Abocom FVR206 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Abocom FVR206 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Abocom FVR206 you will learn all the available features of the product, as well as information on its operation. The information that you get Abocom FVR206 will certainly help you make a decision on the purchase.
If you already are a holder of Abocom FVR206, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Abocom FVR206.
However, one of the most important roles played by the user manual is to help in solving problems with Abocom FVR206. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Abocom FVR206 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
