Instruction/ maintenance manual of the product MX1 ARC Audio
Go to page of 3
MADE IN USA INPUT +12V POWER GROUND REMOTE HIGH PASS LOW PASS LEFT FREQ. RANGE FREQ. RANGE FREQ (Hz) FREQ (Hz) 55 55 75 75 125 125 240 240 400 400 500 500 600 600 PHASE MODEL MX1 MODE STEREO 12dB MONO.
Fu n c t i o n al D i ag r a m No t es When mono switch is selected the low pass output automatically switch to 24dB slope. Use two pieces of MX1 can be configured as a three way active crossover . (take the high pass output signal from #1 MX1 and feed into the input of #2 MX1 ) Each output have an independent output level control.
S pe c ific a tio n s Cau t i o n : Continuous exposure to excessive sound pressure levels may cause permanent hearing loss. ARC AUDIO asks that you use common sense when setting volume levels.
An important point after buying a device ARC Audio MX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ARC Audio MX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ARC Audio MX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ARC Audio MX1 you will learn all the available features of the product, as well as information on its operation. The information that you get ARC Audio MX1 will certainly help you make a decision on the purchase.
If you already are a holder of ARC Audio MX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ARC Audio MX1.
However, one of the most important roles played by the user manual is to help in solving problems with ARC Audio MX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ARC Audio MX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
