Instruction/ maintenance manual of the product XT-7871 MaxTech
Go to page of 12
Part #MAN124 Rev. 1.0 XT7871 XT-7871 USER'S MANUAL • 0.28 mm Dot Pitch • 1280 x 1024, Non-Interlaced • 120 Hz Refresh Rate • Power Saving Operation (VESA DPMS) • Anti-Static, Anti-Glare.
1 T able of Contents Section 1 General Information ................................................... 2 Section 2 Installation .................................................................. 2 Section 3 Monitor Controls and LEDs ..................
2 Section 1 - General Information Congratulations on purchasing a MaxTech 17-inch high resolution color monitor. The monitor uses one of the finest CRTs available in the industry. The 0.28 mm dot pitch non-glare tube provides a crisp and vivid color display.
3 Section 3 - Monitor Controls and LEDs 3.1 Controls and LEDs Expansion boards COM1 COM2 LPT1 VIDEO Figure 2-1 Monitor Connections Figure 3-1 Master Power Control 1.
4 1. Master Power (On rear): Push to provide power to the monitor. This switch should be left ON for daily operation. Use the front panel On/Off control (3) to turn the monitor display on and off. 2. Power Saving Indicator: When lit, the monitor is in the DPMS OFF mode.
5 3.2 On-Screen Display The On-Screen Display (OSD) is enabled by pressing either button of control pair 6 (see Figure 3-2). Control pair 5 ( + and - ) buttons are used to increase or decrease the value of selected parameter. A. Horizontal-Size: Adjusts the display width.
6 Section 4 - Troubleshooting No picture, no LEDs lit. • Check that the AC cord is plugged into an outlet and the monitor. • Turn on the Master Power switch. No picture, power LED is lit. • Monitor is in DPMS STANDBY/SUSPEND mode. Press a key or move the mouse.
7 Appendix A - Specifications Picture Tube Size 17-inch diagonal Dot pitch 0.28mm Horizontal Freq 30-66KHz Vertical Freq. 50-120 Hz Resolution (Max.) 1280 x 1024 Video Dot Rate 100 MHz Data Area 11.
8 Appendix B - Video Cable Pinout Appendix C - Power Saving Modes (DPMS) VESA Display Power Management Signaling (DPMS) defines a method for a computer to signal the monitor to reduce its power consumption when idle. DPMS features must be supported by both the computer and the monitor.
9 Appendix D - Three Year Warranty MAXTECH warrants to the original buyer of this product against defects in material and workmanship for three years from the date of purchase. Except as specified below, this warranty covers all defects in material or workmanship in this product.
10 All warranty services must be performed by Authorized Service Centers. There are no user serviceable parts inside the unit. Do not remove any components or attempt to service the unit by any unauthorized service center. This warranty is voided if the product has been abused, misused, modified, or repaired by an unauthorized service center.
11 the receiver is connected • Consult the dealer or an experienced radio / TV technician for help Notice: Shielded cables, if any, must be used in order to comply with the emission limits. Any change or modification not expressly approved by the Grantee of the equipment authorization could void the user’s authority to operate the equipment.
An important point after buying a device MaxTech XT-7871 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MaxTech XT-7871 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MaxTech XT-7871 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MaxTech XT-7871 you will learn all the available features of the product, as well as information on its operation. The information that you get MaxTech XT-7871 will certainly help you make a decision on the purchase.
If you already are a holder of MaxTech XT-7871, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MaxTech XT-7871.
However, one of the most important roles played by the user manual is to help in solving problems with MaxTech XT-7871. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MaxTech XT-7871 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
