Instruction/ maintenance manual of the product XT5988 MaxTech
Go to page of 10
Part #MAN060 Rev. 1.0 Features • 0.28 mm Dot Pitch • 1280 x 1024, Non-Interlaced • 90 Hz Refresh Rate (VGA/SVGA) • Power Saving Operation (VESA DPMS) • Non-Glare Screen • Full Screen Displ.
1 T able of Contents Section 1 General Information ......................................................... 2 Section 2 Installation ........................................................................ 3 Section 3 Monitor Controls and LEDs ......
2 Section 1 - General Information Congratulations on purchasing a MaxTech 15-inch Color Monitor. The monitor has one of the finest CRTs available in the industry, providing a full range of video display resolutions and complies with the MPR-I standard to reduce electromagnetic emissions.
3 Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 5W. While in this mode the first and second LEDs in the Power Indicator (LEDs A and B in Figure 3-1) are off. When the synchronization signals are re-enabled the monitor returns to normal operation.
4 • Attach the power cord to the monitor and plug it into an AC outlet. • The monitor is now ready for use. Section 3 - Monitor Controls and LEDs 1. Power Indicator: LEDs A, B, and C (See Figure 3-1) indicate the operational state of the monitor. 1.
5 6. Memory Recall Push to reset the display to the default parameters. 7. Dual-Function Toggle Pressing this switch cycles between the two sets of functions controlled by the four pairs of buttons (9-12).
6 the blue intensity, The (-) button decreases the blue intensity. 13. Rotation Control (rear of unit) Adjusts display tilt. *Dual function controls. Use the Dual-Function Toggle (7) to switch between Function Group A and Function Group B.
7 SVGA 800 x 600 72 Hz 48.09 KHz Ultra VGA 1024 x 768 60 Hz 48.37 KHz Ultra VGA 1024 x 768 70 Hz 56.47 KHz Ultra VGA 1280 x 1024 60 Hz 64.31 KHz Synchronization Horizontal: 30-66 KHz Vertical: 50-90 Hz Deflection Geometric distortion H<=2.5mm, V<=2.
8 Appendix C - Service Port The RJ-45 jack on the rear of the monitor is only used for factory servicing. Do not plug any device into this port. Appendix D - Two Year Warranty MaxTech warrants to the original buyer of this product against defects in material and workmanship for two years from the date of purchase.
9 HOW STATE LAW RELATES TO THE WARRANTY This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Appendix E - Notices FCC Class B Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
An important point after buying a device MaxTech XT5988 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MaxTech XT5988 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MaxTech XT5988 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MaxTech XT5988 you will learn all the available features of the product, as well as information on its operation. The information that you get MaxTech XT5988 will certainly help you make a decision on the purchase.
If you already are a holder of MaxTech XT5988, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MaxTech XT5988.
However, one of the most important roles played by the user manual is to help in solving problems with MaxTech XT5988. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MaxTech XT5988 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
