Instruction/ maintenance manual of the product 11-71315-225-01 3M
Go to page of 24
3M Touch Systems Proprietary Information 3M ™ MicroTouch ™ Display C1500SS Installation Guide Read and understand all safety information contained in this document before using this product.
2 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information The information in this document is subject to change without notice.
3M™ MicroTouch™ Display C1500SS Installation Guide 3 3M Touch Systems Proprietary Information Content s Chapter 1 Overview Important Safety Information .....................................................................................5 Explanation of Symbols .
4 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information Chapter 5 Maintenance and Troubleshooting Maintaining Your Touch Display.............................................................................21 Touch Sensor Care and Cleaning .
3M™ MicroTouch™ Display C1500SS Installation Guide 5 3M Touch Systems Proprietary Information CHAPTER 1 Overview Congratulations on the purchase of your touch display, and welcome to the world of 3M Touch Systems — a world where using a computer is as simple as touching the sensor.
6 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information WARNING To avoid the risk of fire which could result in serious injury or death: • Do not remove the cover or back of the display.
3M™ MicroTouch™ Display C1500SS Installation Guide 7 3M Touch Systems Proprietary Information • Plug power cord into a grounded receptacle. • When unplugging power supply cord, pull on plug not cord. • Do not connect or disconnect this product during an electrical storm.
8 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information Technical Support is available Monday through Friday 8:30 a.m. to 5:30 p.m. with limited call back service after 5:30 p.m. until 8:00 p.m . US Eastern Standard Time – 9 a.
3M™ MicroTouch™ Display C1500SS Installation Guide 9 3M Touch Systems Proprietary Information CHAPTER 2 Introduction to Flat-Panel Displays Overview The 3M Touch Systems product line of Flat-Panel Displays offers the C1500SS Display for kiosk, ATM, and industrial enclosures.
10 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information Video Resolution on a Flat-Panel Display Flat-panel displays, unlike CRTs, are optimized to run at one resolution. A flat-panel display has discrete points on the display that determine the exact location of a pixel.
3M™ MicroTouch™ Display C1500SS Installation Guide 11 3M Touch Systems Proprietary Information CHAPTER 3 Setting Up Y our C1500SS Display This chapter describes how to set up and integrate your 3M Touch Systems C1500SS Display into a touch application.
12 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information • RS-232 serial communication cable (or USB cable if applicable) • Optional AC/DC power supply (1.
3M™ MicroTouch™ Display C1500SS Installation Guide 13 3M Touch Systems Proprietary Information • Be sure to tighten all cable screws. • Route all wiring and cabling away from heat sources and sharp metal edges to avoid damage. Also, keep the touch sensor cable away from sources of electrom agnetic and radio frequency interference.
14 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information Using the Standard Controls for the Video Card In addition to the standard controls on the display, each video card has several controls that let you adjust the display settings.
3M™ MicroTouch™ Display C1500SS Installation Guide 15 3M Touch Systems Proprietary Information Testing the C1500SS Display After connection, the display will switch on au tomatically. Before you test your touch display, make sure all cables are connected pr operly.
.
3M™ MicroTouch™ Display C1500SS Installation Guide 17 3M Touch Systems Proprietary Information CHAPTER 4 Adjusting the V ideo Display Your C1500SS Display has several control buttons and an on-screen menu for adjusting the video display. For example: • You can adjust the pixel clock and phase to eliminate noise.
18 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information If you do not press any buttons for approximately 20 seconds, the OSD times out and hides the menu options. You can press the Menu button at any time to display the OSD again.
3M™ MicroTouch™ Display C1500SS Installation Guide 19 3M Touch Systems Proprietary Information Clock Setting If the Clock setting of your image is not fine-tuned, you may observe periodic vertical bars of video noise. These bars of noise are usually adjusted out when an Auto Adjust is performed.
20 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information OSD Sub-Menu Selecting the OSD sub-menu allows you to alter the OSD menu position on the display, which language the OSD will a ppear in, and how long the menu should stay on the screen when no buttons are pressed.
3M™ MicroTouch™ Display C1500SS Installation Guide 21 3M Touch Systems Proprietary Information CHAPTER 5 Maintenance and T roubleshooting If you have a problem setting up or using your display, you may be able to solve it yourself.
22 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information Display Installation Problems No image displayed (blank screen) Is the display receiving power? • Check that the computer’s power cable is connected properly and securely into a grounded electrical outlet.
3M™ MicroTouch™ Display C1500SS Installation Guide 23 3M Touch Systems Proprietary Information Troubleshooting the Touch Sensor If you are experiencing problems with the touch sensor, check the following list of common installation errors. Table 3.
24 3M™ MicroTouch™ Display C1500SS Installation Guide 3M Touch Systems Proprietary Information Regulatory Agency Approvals The C1500SS Display complies with the following regulatory standards: •.
An important point after buying a device 3M 11-71315-225-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M 11-71315-225-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M 11-71315-225-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M 11-71315-225-01 you will learn all the available features of the product, as well as information on its operation. The information that you get 3M 11-71315-225-01 will certainly help you make a decision on the purchase.
If you already are a holder of 3M 11-71315-225-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M 11-71315-225-01.
However, one of the most important roles played by the user manual is to help in solving problems with 3M 11-71315-225-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M 11-71315-225-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center