Instruction/ maintenance manual of the product Plug & Play Internal Voice/FAX/Data/SVD Modem MaxTech
Go to page of 23
Part #MAN128 Rev. 1.0 K56Plus-L/CPI-SVD High Performance K56Plus/V .34+/V .42bis 56K BPS Plug & Play Internal V oice/F AX/Data/SVD Modem With Advanced Speakerphone functions User's Manual Contents Section One - Introduction ..................
The information contained in this manual has been validated at the time of this manual's production. The manufacturer reserves the right to make any changes and improvements in the product de- scribed in this manual at any time and without notice.
1 Section One - Introduction This 56 Kbps* Plug and Play FAX/Voice/Data/ SVD Speakerphone Modem connects your computer to all popular high speed modems available today. The modem incorporates “K56Plus” (56Kbps) technology to provide increased download speeds using regular telephone lines.
2 (e.g., Windows 95), or B) A Plug and Play Revision 1.0a compliant PC. Proceed to Section 2.3 now if you have every- thing required. If you have neither 2A or 2B above, youneed to install Windows 95 to provide Plug and Play function- ality to your PC.
3 7. Connect the telephone cable from the modem's LINE connector to the telephone wall jack. 8. Optionally, connect your telephone to the modem's PHONE connector.
4 2.4.1.1 Windows 95 Release 4.00.950 When Windows 95 starts for the first time after card installation, it detects the modem and displays the New Hardware Found dialog box. Under New Hardware Found , when asked to “Select which driver you want to install for your new hardware,” click on “Driver from disk provided by hardware manufacturer.
5 2.4.2 Configuring in a Plug and Play System with- out Windows 95 When this modem is installed in a Plug and Play system without Windows 95, the computer's BIOS will assign a COM port and IRQ line to the modem. Proceed to Section 2.5, Software Installation/ Configuration.
6 RJ-11 jack marked “PHONE” or by attaching a micro- phone to the MIC jack and a speaker to the SPK jack of your sound card. Follow instructions in the FAX/ Voice/Speakerphone software on recording and play- back of voice prompts.
7 are interested in accessing the modem manually, and not through the included software. Section 4 and 5 contain reference material, and can be skipped. If you have difficulties getting your modem to work, read Section 6 - Troubleshooting to find answers to com- monly asked questions and problems.
8 B1 Bell mode B2 V.23 originate mode @ 75 bps transmit/ 1200 bps receive B 3 V.23 originate mode @ 1200 bps transmit/75 bps receive B15 Selects V.21 at 300 bps B16 Selects Bell 103 at 300 bps D _ 0 -.
9 O _ O0 Return to Data Mode O1 Return to Data Mode and initiate an equalizer retrain P Set Pulse dial as default Q_ Q0 Modem sends responses Q1 Modem does not send responses Sr? Read and display value in register r. Sr=n Set register r to value n (n = 0-255).
10 DTR toggle &D 2 Modem hangs up, returns to the Command Mode after DTR toggle &D3 Resets modem after DTR toggle &F_ &F Recall factory default configuration &G_ &G0 Guard tone.
11 compression %C1 Enable MNP Class 5 data compression only &Q_ &Q0 Direct data link only (same as N1) &Q5 V.42 data link with fallback options &Q6 Normal data link only (same as N0) A.
12 pass XON/XOFF to remote modem or local DTE -C_ -C0 Data calling tone disabled -C1 Data calling tone enabled 3.6 Fax Class 1 Commands +FCLASS? Service class indication +FCLASS=? Service class capabi.
13 +FDTC: Report the polled station capabilities +FET: Post Page Message Response +FET=n Transmit Page Punctuation +FHNG Call Terminations with Status +FK Session Termination +FLID= Local ID String +F.
14 -SRM Retrieve message -SSE=n n=0 Disable DSVD n=1 Enable DSVD -SSP Set transmission speeds -SSR Start sequence response control -SSV Data mode event message -STM Time -STT Telephone handset transaction tone control -SVV Start Voice View data mode Section Four - S Registers Your modem has 28 registers, designated S0 through S92.
15 S37 Connection speed 0-19 0 S38 56K dial line rate 0-16 1 S42-43 Reserved S48 LAPM negotiation 7, 128 7 S89 Sleep mode timer 0, 5-255 seconds 10 S90 Local phone status 0=on hook, 1=off hook S92 Tra.
16 t o “ t a l k ” t o t h e m o d e m o n t h e c o r r e c t C O M p o r t a n d I R Q s e t t i n g ( s a m e C O M p o r t a n d I R Q s e t t i n g a s t h e m o d e m ) .
17 C O M p o r t s :1 , 2 , 3 , 4 IRQ lines: 3, 4, 5, 7, 9, 10, 11, 12, 15 FAX Group: Group III Send/Receive Standard FAX Command set: EIA/TIA-578 Service Class 1, EIA/TIA-SP2388 Service Class 2 Transmit level: -11 dBm +/- 1 dB Receiver Sensitivity: -39 dBm (V.
18 T h e F C C a l s o r e q u i r e s t h e t r a n s m i t t e r o f a F A X t r a n s m i s s i o n b e p r o p e r l y i d e n t i f i e d ( p e r F C C R u l e s P a r t 6 8 , S e c .
19 N O T I C E : T h e L o a d N u m b e r ( L N ) a s s i g n e d t o e a c h t e r m i n a l d e v i c e d e n o t e s t h e p e r c e n t a g e o f t h e t o t a l l o a d t o b e c o n n e c t e d t o a t e l e p h o n e l o o p w h i c h i s u s e d b y t h e d e v i c e , t o p r e v e n t o v e r l o a d i n g .
20.
21.
An important point after buying a device MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem you will learn all the available features of the product, as well as information on its operation. The information that you get MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem will certainly help you make a decision on the purchase.
If you already are a holder of MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem.
However, one of the most important roles played by the user manual is to help in solving problems with MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
