Instruction/ maintenance manual of the product RX9001 Marantz
Go to page of 25
Model RX9001 User Guide Serial Extender ENGLISH FRANÇAIS ESP AÑOL RX9001_SG_EFS.qxd 29-03-2007 16:28 Pagina 1.
Concept and realisation of the Guide: Concept et réalisation du guide : Concepto y realización de la Guía: Human Interface Group, De Regenboog 11, 2800 Mechelen (Belgium) www .higroup.com 3104 205 3444.1 WARNINGS • Do not expose the equipment to rain or moisture.
ENGLISH RX9001 User Guide FRANÇAIS ESP AÑOL RX9001 User Guide RX9001_SG_EFS.qxd 29-03-2007 16:28 Pagina 3.
1 RX9001 User Guide RX9001 User Guide Contents Before Y ou Start ......................................................................................................... 2 Unpacking the Extender .......................................................
ENGLISH 2 RX9001 User Guide Before Y ou Start The Serial Extender is an important element of the RC9001 System and makes it possible to control A/V equipment via RF in the entire house. In addition, it can be connected to A/V equipment via RS232 and allows you to use power sensing for reliable power on/off switching.
3 RX9001 User Guide Unpacking the Extender Serial Extender Front Panel Configuration switch Power input 4 IR ports 4 dipswitches for the IR outputs Extender ID switch Ethernet input (RJ45) 4 Power sen.
ENGLISH 4 RX9001 User Guide Installing the Extender Mounting the Extender in a Rack Warning Keep the Extender away from heat sources such as amplifiers. Mounting Kit 2 Dual IR Emitters 2 Mini-jack IR Cables Power Adapter Configuration Cable Crossed Ethernet cable x 2 x 6 x 4x 4x 4 Fit the mounting plate on the Extender with the screws.
5 RX9001 User Guide Connecting the Extender to External Equipment The Extender can be connected to external equipment through the various outputs on the back panel. Warning Make sure that the equipment is always turned off before connecting it to the Extender .
ENGLISH 6 RX9001 User Guide Using the Sensor Inputs When the Control Panel sends out a macro to switch multiple A/V components on or off, discrete codes are normally used to ensure the state of the component.
7 RX9001 User Guide Use a serial cable. Connecting to Relay-controlled Equipment Use standard wiring and Phoenix connectors. Connecting to Serial Equipment There are two ways to connect serial equipment to the Extender: Note For most A/V components a standard female to male or female RS232 cable can be used.
ENGLISH 8 RX9001 User Guide Use standard wiring and Phoenix connectors. Ti p In case you experience communication problems when using the RS232 wiring solution illustrated above, make sure that the GND pin on the Extender is grounded correctly on the side of the A/V component.
9 RX9001 User Guide Configuration switch: 1 Inserting a Multimedia Server in the Network Y ou can add an Escient Media Server or an Imerge Sound Server to your network. 1 Connect the Server to the router . 2 Open Wizz.it Ex . 3 Open the configuration file .
ENGLISH 10 RX9001 User Guide 4 Plug in the Extender’ s power adapter . The Extender will start up. After startup, the Power and Ethernet LEDs are green. The Busy LED blinks green when it’ s processing a code or a macro. Configuring the Extender Y ou can connect the Extender directly to the PC for configuration.
11 RX9001 User Guide Configuration through a router 1 The Extender is already connected to the router . Connect the router to the PC as well. 2 Set the Configuration switch to 3 for configuration : The Extender will restart. After start-up, the Power and Ethernet LEDs are green and the Busy LED is red/green blinking.
ENGLISH 12 RX9001 User Guide Support T roubleshooting What Do the LEDs Indicate? Ethernet LED Busy The Extender’ s IP address is being determined. Green blinking The Extender is busy processing a code or short macro from a Control Panel. The Extender is functioning normally .
13 RX9001 User Guide Configuration switch: 2 Operating A/V components with the Extender The A/V components do not respond to commands from the Extender • Check if the Busy LED blinks green when you send a command with the Control Panel. If the Busy LED does not blink, the Extender is not receiving commands from a Control Panel.
ENGLISH 14 RX9001 User Guide 6 Select Firmware Update in the left navigation pane. The Firmware Update page opens. 7 Follow the onscreen instructions. When you are asked to browse to the update file, you need to select the ZIP file you downloaded earlier from the website.
Serial Extender User Guide © Marantz Brand Company – A division of D&M Holdings Inc. D&M Building, 2 -1 Nisshin-CHO, Kawasaki-KU, Kawasaki- SHI, Kanagawa, 210-8569, Japan. Remarks: All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner .
ENGLISH RX9001 User Guide 16 RX9001_SG_EFS.qxd 29-03-2007 16:29 Pagina 19.
i RX9001 User Guide RX9001_SG_EFS.qxd 29-03-2007 16:30 Pagina 51.
FCC Compliancy This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
Finnish V anhan tuotteen hävittäminen T uotteesi on suunniteltu ja valmistettu laadukkaista materiaaleista ja komponenteista, jotka voidaan kierrättää ja käyttää uudelleen. T uotteeseen kiinnitetty yliviivatun roskakorin kuva tarkoittaa, että tuote kuuluu Euroopan parlamentin ja neuvoston direktiivin 2002/96/EC soveltamisalaan.
Polish Usuwanie zużytych produktów Niniejszy produkt został zaprojektowany i wykonany w oparciu o wysokiej jakości materiały i podzespoły , które poddane recyklingowi mogą być ponownie użyte. Jeśli na produkcie znajduje się symbol przekreślonego pojemnika na śmieci na kółkach, podlega on postanowieniom dyrektywy 2002/96/WE.
IFU Approbation / Safety Content iv Marantz America, Inc. 100 Corporate Drive Mahwah, NJ07430 RX9001_SG_EFS.qxd 29-03-2007 16:30 Pagina 55.
Printed in Belgium 05/2007 00M41CW851250 mzh-d www .marantz.com Y ou can find your nearest authorized distributor or dealer on our website. is a registered trademark.
An important point after buying a device Marantz RX9001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marantz RX9001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marantz RX9001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marantz RX9001 you will learn all the available features of the product, as well as information on its operation. The information that you get Marantz RX9001 will certainly help you make a decision on the purchase.
If you already are a holder of Marantz RX9001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marantz RX9001.
However, one of the most important roles played by the user manual is to help in solving problems with Marantz RX9001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marantz RX9001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
