Instruction/ maintenance manual of the product PV7000C Makita
Go to page of 12
1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULA T ION W ARNING: For your personal safety , READ and UNDERST AND before using. SA VE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
2 ENGLISH (Orig inal instruct ions) SPECIFICA TIONS Model PV7000C Max capacities S ponge pad/ Wool bonnet 180 mm S pindle thread M14 Rated speed (n)/N o load speed (n 0 ) 600 - 2,000 min -1 Overall leng th 210 mm Net weight 2.
3 Conforms to the following European Directives: 98/37/EC until 28 th December 2009 a nd then with 2006/42/EC from 2 9th December 2009 And are manufactured in a ccordance w ith the following standards.
4 hazards. Power tool use and care 18. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for wh ich it was design ed. 19. Do not use t he power t ool if the sw itch does not turn it on and off.
5 10. Position the cord cl ear of the spinning accessory . If you lose control, the co rd may be cut or snagged an d your hand or ar m may be pulled into the spinning accessory . 11 . Never lay the power tool down until the accessory has come to a complete stop.
6 FUNCTIONAL DESCRIPTION CAUTION : • Always be sure th at the tool is switched of f and unplugged before adjusting o r checkin g function on the tool. Switch action 1 2 003407 CAUTION : • Before plugging in the tool, alway s check to see that the switch trigger actuates properly and returns to th e "OFF" posi tion when released .
7 Inst alling side gr ip (auxiliary handle) & co ver 1 2 004419 1 2 004420 CAUTION : • Always be sure that the side grip is installed securely before operation . Install the cov er, then screw the side grip on the tool securely . The side grip and the cover can be inst alled o n either side of the tool.
8 004426 T o remove the wool bonnet, follow the installation procedure in reverse. OPERA TION Polishing operation b y sponge pad 003479 CAUTION : • Always wear safe ty glasses or a face shield du ring operation. In general, keep th e sponge pad at an angle of about 15 degrees to the workpiece surface.
9 • S ponge pad (Hook & loop) • Backing pad 165 (Hook & loop) • Wool bonnet 180 • Wrench 17 • Side grip (auxiliary handle).
10.
11.
12 Makita Corporation Anjo, Aichi, Japan 884356C223.
An important point after buying a device Makita PV7000C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita PV7000C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita PV7000C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita PV7000C you will learn all the available features of the product, as well as information on its operation. The information that you get Makita PV7000C will certainly help you make a decision on the purchase.
If you already are a holder of Makita PV7000C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita PV7000C.
However, one of the most important roles played by the user manual is to help in solving problems with Makita PV7000C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita PV7000C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
