Instruction/ maintenance manual of the product MPC-200 Macsense Connectivity
Go to page of 13
1 User’ s Manual F ast Ethernet Car dBus (MPC-200) R acse n se.
T able of Contents Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Network Interface . . . . . . . . .
Chapter 1 Introduction This manual describes how to operate the Fast Ethernet CardBus Card. The Fast Ethernet LAN PC Card is a Credit-card sized Ethernet Card which works with any comput- er , notebook, sub-notebook or Macintosh PowerBook G3 series, or Card Reader that sup- ports CardBus slots.
¥ Bus Width: 32 bits ¥ Power: 3.3 V ¥ T emperature: 0ûC~60ûC/ 32ûF~140ûF (Std. Operating) ¥ Humidity: 10% to 90% ¥ Distance: 100m from Hub to Node ¥ Dimensions: 86mm x 54mm x 5 mm Installing the Fast Ethernet CardBus Card Y ou will be installing the Fast Ethernet CardBus Card in your computer .
Chapter 2 Getting Started Installing the Fast Ethernet CardBus Card Y ou will be installing the Fast Ethernet CardBus Card in CardBus slot of your computer . If you have trouble locating the slot, please refer to your computer's user manual or consult the dealer of your computer .
LED Indicators ¥ 100 LED: This LED is used to indicate the Ethernet speed: The green light indicates a connection with a 100BASE-TX Fast Ethernet network . ¥ Link/Act LED: This LED is used to indicate the network activity . It is blinking when the PC Card is transmitting or receiving packets from network.
Chapter 3 Driver Installation for Mac OS System Requirements ¥ Mac OS version 8.1 or above. ¥ Macintosh G3 PowerBook Series. ¥ Card and Socket Service 3.0. ¥ Open T ransport 1.3 or above Installation Before your computer system can recognize your Fast Ethernet CardBus Card, it is necessary to run some software to enable it.
4. Click the Install button. The Installer will install the appropriate driver to your com- puter . 5. Click the Restart button when installation is completed. AppleT alk Setup ¥ Open the AppleT alk control panel ¥ Select FastEther Card from the pop-up menu.
¥ Close the control panel when you have finished. ¥ T o confirm the change of network connections, click OK . TCP/IP Setup ¥ Open the TCP/IP control panel. ¥ Select FastEther Card from the pop-up menu. . ¥ Set up TCP/IP configuration according to the situation of your network environment.
¥ Drag the FastEther Card icon that appears on the desktop to the T rash. ¥ Then the FastEther Card will eject automatically . Chapter 3 Driver Installation for Mac OS 8.
Appendix A Specifications ¥ Network standard: 10Mbps IEEE 802.3 10BASE-T Ethernet 100Mbps IEEE 802.3u 100BASE-TX Fast Ethernet ¥ T ype II PCMCIA, Hot Plug-and-Play Fast Ethernet CardBus Card, supports Full Duplex 10BASE-T and 100BASE-TX communication ¥ Complies with 32-bit PCI Card Bus specification.
Appendix B Pin Assignment RJ-45 connector The RJ-45 connector is used to connect with a hub or switch, RJ-45 regular ports can be attached to any devices which use a standard network interface (e.g., a workstation, server , bridge or router). RJ-45 up-link ports can be cascaded to a station port on similar networking devices (e.
Copyright Copyright © 1998 by this company . All right reserved. No part of this documentation may be reproduced in any form or by any means or used to make any directive work ( such as translation or transformation ) without permission from Macsense Connectivity , Inc.
An important point after buying a device Macsense Connectivity MPC-200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Macsense Connectivity MPC-200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Macsense Connectivity MPC-200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Macsense Connectivity MPC-200 you will learn all the available features of the product, as well as information on its operation. The information that you get Macsense Connectivity MPC-200 will certainly help you make a decision on the purchase.
If you already are a holder of Macsense Connectivity MPC-200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Macsense Connectivity MPC-200.
However, one of the most important roles played by the user manual is to help in solving problems with Macsense Connectivity MPC-200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Macsense Connectivity MPC-200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
