Instruction/ maintenance manual of the product 2x2 M-Audio
Go to page of 26
M I D ISpor t 1x1/2x2/2x4/ 4x4 User Guide English.
T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 MIDISPORT Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Package Contents . . . . . .
2 Introduction Thank you for purchasing a M-Audio MIDISPORT™ MIDI interface for USB-equipped PC and Macintosh computers. MIDISPORT’ s high speed Universal Serial Bus connection to the computer assures reliable and speedy transfer of MIDI data.
MIDISPORT Pr oduct Features The MIDISPORT USB MIDI Interface has the following features: • MIDISPORT 1x1: 1-In, 1-Out MIDI Interface (16x16 MIDI channels) • MIDISPORT 2x2: 2-In, 2-Out MIDI Interfa.
4 Product Overview The MIDISPORT provides up to four independent MIDI input ports and up to four independent MIDI output ports, depending on which model you have. Each MIDI port supports 16 MIDI channels, therefore the MIDISPORT is capable of sending and receiving from 16 (1 port x 16 channels) to 64 (4 ports x 16) channels.
IMPORT ANT : The OMS MIDI driver is provided for use with Mac OS 9.2.2. Y ou MUST have a sequencer that supports OMS and have OMS properly installed in or der to use the MIDISPORT (this does not apply to Mac OS X). Getting Started Here is an outline of the steps needed to begin using your MIDISPORT on either a Mac or a PC: 1.
6 Windows XP NOTE: The Windows XP Service Pack 1 is requir ed for USB 2.0 equipped Computers. 1. Insert the M-Audio Drivers CD-ROM into your CD-ROM drive. 2. Open 'My Computer' or 'Windows Explorer' to locate your CD-ROM drive. 3. Double-click the CD-ROM drive that contains the M-Audio Drivers CD-ROM.
7. Y ou will see a warning that this device has not passed Windows logo testing. Click "Continue anyway". 8. When the installer has completed installation, plug in your MIDISPORT .
8 9. Y ou will see a “New Hardware found” dialog. Click Next. 10. Y ou will see another warning that the product has not passed Windows logo testing.
12. Y ou will see another window telling you that New Hardware has been found. Click Next. Although the process seems redundant, the installer is actually installing different components of the MIDISPORT drivers with each iteration. 13. Again, the computer reminds you that the product has not passed Windows Logo testing.
10 14. The driver has been installed. Windows XP Installation is now complete. Windows 2000 1. Ser vice Pack 2 or higher is required for proper operation of the MIDISPORT driver . This service pack is available from Microsoft Downloads at www .microsoft.
7. A dialog box will appear , reminding you to exit all currently running programs and to disconnect the MIDISPORT from the USB port. Check to make sure this is done and click “Next” to continue. The installer will then scan your hard drive, install the necessary files, and perform setup actions on your system.
12 9. A dialog box will appear , stating that the installation has succeeded. Click “Finish” to complete the driver installation. 10. Plug the MIDISPORT into your computer’ s USB port. Upon doing so, the computer will find and install the necessar y drivers.
12. The next screen informs you that the installer has completed. Click “Finish” to continue. 13. Windows 2000 will prompt you to restart the computer , in order to complete the installation. Click “Y es” to restart with new settings. Windows 2000 Installation is now complete.
14 6. A dialog box will appear , reminding you to exit all currently running programs and to disconnect the MIDISPORT from the USB port. Do these things and click “Next” to continue. The installer will scan your hard drive and will then install the necessary files and perform setup actions on your system.
Mac OS 9 This release version of the MIDISPORT driver requires Macintosh operating system OS 9.2.2. Some updates are offered free to Apple owners. Please check the Apple website at http://www .
16 2. Run the MIDISPORT Installer by double clicking on it. This installs all of the MIDISPORT’ s extensions as well as the MIDISPORT OMS Driver . However , YOU MUST HA VE OMS INST ALLED FIRST BEFORE YOU RUN THIS INST ALLER PROGRAM. Otherwise, the MIDISPORT OMS Driver will not be placed in the OMS folder .
6. “OMS Driver Setup” shows the MIDISPORT in a list when OMS successfully finds the driver . Click OK. OMS will now define (shows “Identifying”) the MIDISPORT output ports. 7. The “OMS MIDI Device Setup” dialog box will appear showing the MIDISPORT’ s output ports with an open check box to the left of each port.
8. Next, the “My Studio Setup” appears with a File Save dialog box over it. Y ou will now need to name (or you can use the default name) and save your new Studio Setup before you can assign instruments to the MIDISPORT’ s outputs.
Mac OS X The drivers for Mac OS X are found on the Driver CD which comes with the product. Y ou may also wish to check the MIDISPORT drivers page of our website to make sure you have the most recent version.
20 your host computer’ s USB port and plug it into the USB port on the back of your computer . T ake the other end of the USB cable and plug it in to the USB port on the back panel of the MIDISPORT . This male end of your USB cable is square (1/4" x 1/4") and should fit easily into the female USB connector on your MIDISPORT .
Setting Up your MIDI Studio A typical MIDI studio set-up would include your MIDISPORT , a computer , MIDI sequencing software, a MIDI controller keyboard and perhaps MIDI compatible sound modules. The example which follows, and is shown in the diagram here, uses the MIDISPORT 2x4, however all MIDISPORT interfaces can be set up in a similar manner .
22 Y our music software manages the routing of MIDI data to and from your computer . Proper installation of the MIDISPORT drivers will allow each of the MIDISPORT’ s ports to appear in any MIDI application.
When the USB/MIDI Thru button is in the OUT position, the unit will be in “passive” Thru Mode. The internal wiring of the MIDISPORT is hard wired for this routing scenario: MIDISPORT 2x2: • MIDI.
24 Follow your MIDI sequencing program’ s operating instructions for setting up the rest of your MIDI studio. Y ou may need to put your controller keyboard into “Local Off” mode, and the sequencer into “Keyboard Thru” mode.
M-Audio USA 5795 Martin Rd., Irwindale, CA 91706 T echnical Support web: www .m-audio.com/tech tel (pro pr oducts): (626) 633-9055 tel (consumer products): (626) 633-9066 fax (shipping): (626) 633-9032 Sales e-mail: sales@m-audio.com tel: 1-866-657-6434 fax: (626) 633-9070 W e b www .
An important point after buying a device M-Audio 2x2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought M-Audio 2x2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data M-Audio 2x2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, M-Audio 2x2 you will learn all the available features of the product, as well as information on its operation. The information that you get M-Audio 2x2 will certainly help you make a decision on the purchase.
If you already are a holder of M-Audio 2x2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime M-Audio 2x2.
However, one of the most important roles played by the user manual is to help in solving problems with M-Audio 2x2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device M-Audio 2x2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
