Instruction/ maintenance manual of the product CIB 3020 Lucent Technologies
Go to page of 8
Lucent Technologies Bell Labs Innovations CIB 3020 (506A2) 10-Basic Telephone Module (61311) (105211049) CIB 3020 Comcode 103983946 Issue 4 January 1997 .
ADDENDUM (CIB 3020) T/R STATION MODULE NOTE: THE USE OF A TRIMLINE ® TELEPHONE IS NOT RECOMMENDED WITH THIS UNIT 84555472 4.
CIB 3020 10-Basic Telephone Module The 10-Basic Telephone Module (Figure 1) allows you to connect up to ten basic touch-tone or rotary telephones to your Model 1030 or 3070 communica- tions system.
Installing the 10-Basic Telephone Module WARNING: Before removing or inserting modules in the control unit or expansion unit, be sure to turn the power switches to the off posi- tion in both units. This module can be mounted in slots labeled 10 or 11 in the control unit or slots labeled 21, 22, 23 or 24 in the expansion unit.
4. Align the module in the slot (Figure 3), making sure the edges of the circuit board are in the top and bottom grooves of the slot. Figure 3 Installing the Module (Typical) 5. Slide the module into the slot until the latch at the bottom of the module catches at the base of the slot.
Removing the 10-Basic Telephone Module To remove the module from the control unit or expansion unit, turn the power switches to the off position, disconnect the modular cords from the 10-Basic Telepho.
FEATURE MODULES 4 AND 5 Refer to your administration manual’s Section titled “Special lnformation About Basic Telephones” for instructions, NOTE: If you have a pooled system and want people with.
Lucent Technologies Bell Labs innovations Copyright © 1996, Lucent Technologies All Rights Reserved Printed in U.S.A..
An important point after buying a device Lucent Technologies CIB 3020 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lucent Technologies CIB 3020 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lucent Technologies CIB 3020 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lucent Technologies CIB 3020 you will learn all the available features of the product, as well as information on its operation. The information that you get Lucent Technologies CIB 3020 will certainly help you make a decision on the purchase.
If you already are a holder of Lucent Technologies CIB 3020, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lucent Technologies CIB 3020.
However, one of the most important roles played by the user manual is to help in solving problems with Lucent Technologies CIB 3020. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lucent Technologies CIB 3020 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
