Instruction/ maintenance manual of the product IR DMX Controller Lowel Light
Go to page of 8
IR DMX Controller Instructions Overview 2 IR Sensor 2-3 Software 2 Setting & Recalling Scenes 3 Buttons 4-5 Buttons/Arrows 5 Using The IR DMX Controller 6 Replacing Batteries 7 Preparing for Use 7.
2 Over view Installation Perform the installation with the fixture power OFF . Attach the IR Sensor with the sensing element to a lighting truss, fixture, yoke, ceiling, etc.
3 Preparing for Use After the installation, make sure that the LED flashes steadily from every intended point of operation when operating the remote control, and by watching the IR LED indicator (located on the IR Sensor’ s body). By fine tuning its location using this method, you will achieve the maximum coverage of the room.
4 Buttons ON Quickly press to turn the Controller ON. ■ T o start or return to active operation press the ON button. Shutdown ■ T o turn the IR DMX Controller OFF , hold the SET button for 2 seconds.
+ Level will increase the dim- ming level (%) of the fixture from 0–100%. ■ The level can be increased one percent at a time by clicking the but- ton singly . ■ Holding the button down, will gradually increase the fixture to 100%. ■ The longer the + Level button is held, the faster dimming will occur .
6 Using The IR DMX Controller Important - T o use the IR DMX Controller , fluorescent fixtures must first be ‘enabled’. See Sub-Menu Mode, pg 4. LCD 2 line, 8 character Liquid Crystal Display .
7 Setting & Recalling Scenes The IR DMX Controller can store up to 10 different scenes, with each scene containing dimming levels for up to 512 Lowel/Fluo- T ec dimmable fixtures. All scenes are saved in non- volatile memory . Note: see Replacing Batteries (pg.
W arranty , Problems, Repairs & Info Lowel-Light Manufacturing, Inc. 140 58th Street Brooklyn, NY 11220 Call: 800 334-3426 or 718 921-0600 Fax: 718 921-0303 e-mail info@lowel.com www .lowel.com ® Lowel equipment and kits are sold through authorized Lowel Dealers and, in some countries, Authorized Lowel Distributors.
An important point after buying a device Lowel Light IR DMX Controller (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lowel Light IR DMX Controller yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lowel Light IR DMX Controller - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lowel Light IR DMX Controller you will learn all the available features of the product, as well as information on its operation. The information that you get Lowel Light IR DMX Controller will certainly help you make a decision on the purchase.
If you already are a holder of Lowel Light IR DMX Controller, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lowel Light IR DMX Controller.
However, one of the most important roles played by the user manual is to help in solving problems with Lowel Light IR DMX Controller. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lowel Light IR DMX Controller along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
