
DAY-NIGHT CAMERA
Frequently Asked Questions
English Version 1.0


Copyright © 2006 LOREX Technology Inc.

The following questions are addressed in this FAQ Guide.
If you have any additional questions or technical issues, please contact the Sentinel CCTV Help desk for further assistance at 1-888-425-6739 (Option 1 - 1) or mail your questions to support@lorexcctv.com

I am trying to connect to my device, and need to know what Ports to Forward - how do I do this?
You will need to enable port forwarding on your Router to allow for external communications with your Video Network Server. The following ports will need to be forwarded for remote connection:
Computers, DVRs, and other devices inside your network can only communicate directly with each other within the internal network. Computers and systems outside your network cannot directly communicate with these devices. When a system on the internal network needs to send or receive information from a system outside the network (i.e. from the Internet), the information is sent to the Router.
Router External IP 216.13.154.34
Router Internal IP 192.168.0.1
Computer Internal IP 192.168.0.2

DVR Internal IP 192.168.0.150
When a computer on the Internet needs to send data to your internal network, it sends this data to the external IP address of the Router. The Router then needs to decide where this data is to be sent to. This is where setting up Port Forwarding becomes important.
Port Forwarding tells the router which device on the internal network to send the data to. When you set up port forwarding on your Router, it takes the data from the external IP address:port number and sends that data to an internal IP address:port number (i.e Router External IP 216.13.154.34:9001 to Video Network Server Internal IP 192.168.0.150:9001).
The instructions found online in the Router Configuration Guide will assist you in the port forwarding configurations for a selection of different router models.Visit our Consumer Guides Support website at http://www.lorexcctv.com for more details
Internet Internal Network

I am trying to view video from my Video Network Server, but nothing is appearing onscreen. Are there additional changes I need to make to my system?
The settings in Internet Explorer may need to be changed by setting ActiveX to Enabled, and allowing Pop-ups in Internet Explorer (or by disabling any third party popup blocker software).
To correctly load the Web Client Software, the security settings in Internet Explorer may need to be adjusted:
z Set ‘Automatic Prompting for Active X Controls’ to Disable
z Set ‘Download Unsigned Active X Controls’ to Prompt
z Set ‘Allow script-initiated windows without size or position constraints’ to Enable
The Web based client software requires the use of Pop-Ups in Internet Explorer. Once the address has been entered into the Address bar, an alert may appear indicating that a Pop-Up window has been blocked:



I am trying to enable emailing from my Video Network Server, but I am not getting any emails. What settings do I need to make?
There are some SMTP Email Servers that do not work with the Lorex Email function. Some troubleshooting steps to try to resolve the issue include:
The Lorex email server is guaranteed to work with this unit.

Specification Sheets
User Manuals
Software Upgrades
Quick Start Guides
Firmware Upgrades

wwwlorexcctv.com www.lorexcctv.com
Strategic Vista International Inc.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.