

B U S I N E S S & H O M E

* This camera is not designed for direct exposure to water, rain or snow




subsidiaries reserve the right to modify product design, specifications
and prices, without notice and without incurring any obligation. E&OE
As our products are subject to continuous improvement, SVII and its
V I S I T
1/4” Interline transfer type color CCD
Power Consumption 100mA (no LED)/200mA (LED)
Scanning System (NTSC) 525 Lines 2:1 Interlace
Shutter Speed (NTSC) 1/60 – 1/100,000 sec.
Min. Illumination 1.0 (no LED) / 0.1 Lux (LED)
Effective Pixels NTSC 510H x 492V (250K)
S/N Ratio More than 48dB (AGC off)
Video Output VBS 1.0 Vp-p (75 Ω load)
Lens Varifocal Lens (4 - 9 mm)
Power Supply DC12V ± 10% (Regulated)
Scanning Frequency (NTSC) 15.734KHz (H),
Sync. System Internal/Line Lock Mode
Operating Temperature 14F to 113F (-10 ~ +50)
59.94Hz (V)
Resolution Horizontal 350 TV Lines
Operating Humidity 90% RH max
Take Sunshade Off
Specifications
White Balance AWB · Image Sensor

a. Turn screw clockwise (to unlock) and move to or N
a. Turn screw clockwise (to unlock) and move to T or W
b. Adjust the variable lens between T W (Tele
c. Turn screw counter-clockwise to lock position.
c. Turn screw counter-clockwise to lock position.
b. Adjust the variable lens between N.


Wide).
a. Attach the camera to the mounting bracket and tighten
b. Connect the supplied cable to the back of the camera.
The mounting bracket is designed to permanently mount the
The 6 ft camera cable has a female BNC connector (for video


output) and a female power jack
camera (i.e. to wall or ceiling)
See diagram below.
the swivel.
63 ft extension cable



Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.