Instruction/ maintenance manual of the product ATA-133 Lindy
Go to page of 8
- 1 - Low Pro file Ultra ATA-133 RAID PCI Ho st 1. I n trod ucti on T his Low Profile Ultra AT A-133 RAID PCI Host Adapter is a PCI to dual Ultra AT A-133 host controller board which can support Low profile PCI and regular size PCI both.
- 2 - Supports software-controlled AT A bus tri-state. Supports device specific timing registers. Supports device read-ahead and write-ahead capability under Virtual DMA. Features one 256-byte FI FO (32-bit x 64 deep) per IDE channel for host reads and writes.
- 3 - fault tolerance. With modern SAT A bus mastering technology, multiple I/O operations can be done in parallel, enhancing performance. Striping arrays use multiple disks to form a larger virtual disk. Dis k M irroring (RAI D 1 ) Disk mirroring creates an identical twin for a selected disk by having the data simultaneously written to two disks.
- 4 - 1. As the BIOS boots, press F3 to enter the raid bios utility. 2. Select Create RAID set . Press F2 . 3. Select Create Mirrored set press F2 . 4. Press Y Select automatic Setup. 5. Press Y and then press ESC to exit the setup. 6. Continue with conventional Fdisk and Format steps as if you are installing a conventional hard drive.
- 5 - 3.7 . Resolvi ng Conflict When a RAID set is created, the metadata written to the disk includes drive connection information (Primary and Secondary).
- 6 - the operating system boots, click on the Start button located at the bottom left hand corner of the Desktop, select Settings and then Control Panel . Find and click on the SCSI Adapters . Click Drivers and Add . T he next window is asking for the location of the driver to be installed.
- 7 - 1. After computer restarts, insert floppy disk in floppy disk drive. 2. Double-click on My Computer. 3. Double-click on 3 1/2 Floppy [A:]. 4. Double-click on InstallSiI Config.exe. 5. Follow on-screen instructions to complete installation. Note: Do NOT install in the Start Up folder.
- 8 - 2-ST 305-01A Thi s de v ice complies with P art 15 o f t he FCC Rules. Operati on is s ubj ect to the f oll owing two condi tions: (1) this de v i ce may not cause harmf ul int erference, and (2) thi s de v ice m ust accept any i n terf erence r eceived, incl uding int erf erence t ha t may cause undesir ed operati ons.
An important point after buying a device Lindy ATA-133 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lindy ATA-133 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lindy ATA-133 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lindy ATA-133 you will learn all the available features of the product, as well as information on its operation. The information that you get Lindy ATA-133 will certainly help you make a decision on the purchase.
If you already are a holder of Lindy ATA-133, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lindy ATA-133.
However, one of the most important roles played by the user manual is to help in solving problems with Lindy ATA-133. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lindy ATA-133 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
