Instruction/ maintenance manual of the product TD1 Linak
Go to page of 8
PRODUCT DA T A SHEET TWINDRIVE TM TD1 Features: • Angle footrest 45°± 3° • Angle headrest 68° ± 3° • Compatible with HB10 and HB20 • EOP in TD1 280 version • T oroidal T ransformer in TD1 280 and EI core T ransformer in TD1 220 • Duty cycle: 10% ~ 6 min.
Dimension (mm): Compatible actuators: Actuators that are compatible with TD1: LA31 LA27 Cable for LA27 The cable used together with LA27 has to order ed separately: LA27 (0705816) Cable for LA31 The cable used in combination with LA31 is not possible to choose in the respectable ordering examples for the actuator .
Mounting instructions: Before mounting, both mounting brackets must be pulled out to their outer position by pushing them back. This gives freedom of movement to the bed bracket. Mounting is done by pushing the bed bracket into the TD1 unit and thereafter pushing the mounting brackets back again.
Mounting instructions (welding): Welding diagram: T o maintain the correct angle of rotation of the head rest and the foot rest it is important that the T wist bracket is welded according to the above instructions. Non compliance with the instructions could lead to a smaller angle of rotation or in a worst case damage to TD1.
Removal / fi tting of the 9V batteries: Changing of the 9V batteries is possible by pushing the batteries upwards via the two holes in the bottom of the unit. It is necessary to use a blunt instrument with a diameter of Ø6 mm. When the batteries are visible from above they can be removed by using fi ngers.
Speed diagram: 65 Maximum torque occurs with a non-linear load as prevails under use in a leisure bed. That is to say large torque during start, which lessens as the backrest is raised.
T echnical specifi cations: TWINDRIVE™ TD1 220: Ordering example: T ype Spindle pitch (mm) T orsion max. (Nm) Speed at full load (Rpm) Duty cycle (%) TD1 220 2.5 220 0,43 10 TD1 280 2.5 280 0,56 10 The above measurements are made in connection with internal control box and are average values.
Specifications subject to change without prior notice. It is the responsibility of the product user to determine the suitability of LINAK A/S products for a specific application. LINAK will at point of delivery replace/repair defective products covered by the warranty if promptly returned to the factory .
An important point after buying a device Linak TD1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linak TD1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linak TD1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linak TD1 you will learn all the available features of the product, as well as information on its operation. The information that you get Linak TD1 will certainly help you make a decision on the purchase.
If you already are a holder of Linak TD1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linak TD1.
However, one of the most important roles played by the user manual is to help in solving problems with Linak TD1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linak TD1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
