Instruction/ maintenance manual of the product X-Cruiser Apevia
Go to page of 7
X-Cruiser Series Installation Guide 1:Unscrew the thumb screws 2.Pull the side panel back then 3:Fi nd the motherboard stand-offs from Side Panel. pull out. from the enclosed screw box. 4:Put the motherboard stand-offs 5.Sit the motherboard on the 6.Find screws in the screw box.
9.Take out front panel: (Optional. Only if you need to install front fans or replace LCD) Step (1): Unscrew the side panel Step (2): Take ou t the side Step (3): There are 4 screws that panel (motherboard side) panel (motherboard side) hold the front panel to the case.
14.Screw all 5.25” drives 15. 3.5” External Drives: 16.Insert external 3.5” drives in place. Force out 3.5” metal plat e and and secure with screws in place. drive cover with a screw driver. 17. 3.5” Internal Drives : 18.Screw all 3.5” hidden driver s 19.
23.Find 2*USB Cables.(USB1 24.Plug USB ca bles to your M/B. 25.Find “HDD LED” and & USB2) Please refer to M/B User Manual. “Reset SW” cables. 26.Plug them onto your M/B. 27. Find “Power SW” and “+P LED” 28.Find “Case Speaker” from Please refer to M/B user manual.
32. LCD Temperature Readout: 33.Remove the protective plastic 34.This is the temperature Connect 4-pin Male connector from tube from the sensor. sensor. It’s very fragile. LCD to a 4-pin Female connector Be gentle. from power supply. 35.You can either tape the sensor on hard driv e or on CPU Heat 36.
40.After connecting the fan 41.Once the audio cable is plug 42.There are volume and speed controller, you would be into motherbo ard, the volume fan speed adjusters on the able to read the fan speed from gauge will show the sound side of front panel. the front fan speed gauge.
PIN ASSIGNMENT Description Signal Color Color Signal Description USB Power (+5V) for Port 2 VCC RED RED VCC USB Power (+5V) for Port 1 USB Negative Signal for Port 2 -D WHITE WHITE -D USB Negative Sig.
An important point after buying a device Apevia X-Cruiser (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Apevia X-Cruiser yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Apevia X-Cruiser - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Apevia X-Cruiser you will learn all the available features of the product, as well as information on its operation. The information that you get Apevia X-Cruiser will certainly help you make a decision on the purchase.
If you already are a holder of Apevia X-Cruiser, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Apevia X-Cruiser.
However, one of the most important roles played by the user manual is to help in solving problems with Apevia X-Cruiser. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Apevia X-Cruiser along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
