Instruction/ maintenance manual of the product ATX-B2KL Apevia
Go to page of 5
ATXB2KL Series Installation Guide 1:Unscrew the Thrum Screws 2.Pull the Side Panel back then 3:Fi nd the motherboard Stand-Offs from Side Panel. pull out. From the enclosed Screw Box. 4:Put the motherboard Stand-Offs 5.Sit the motherboard on the 6.Find screws in the Screw Box.
7.Screw in all the screw s in to th e 8.Same as Step 7. Motherboard Stand-Offs 9.Take out front panel: (For installation of 5.25” drives and front fans) Step (1): Unscrew the side Step (2): Take ou t the side Step (3): There are 4 screws that Panel (motherboard side) pane l (motherboard side) hold the front panel to the case.
10. Optional : Install Case Fan in 11. Optional : Install Case Fan at 12.Take out the metal plate and the front panel (You can put up rear. (1*80mm- 120mm fan) install 5.25” drives(DVD, CD-RW, to 2*80mm fans in the front.) CD-ROM) 13.Secure the 5.25” drives 14.
19.Find the Audio Cables and 20.Put the I/O slot back. 21.Screw the I/O slot back. Bring them through the I/O slot to outside of the back panel. 22.Find the 4-pin connectors 23. Find the 20-pin connector 24.Pl ug into your motherboard. (Female and Male) from case from Power Su pply.
28.Plug USB Cables to your M/B. 29.Find “HDD LED” and 30.Plug them onto your M/B. Please refer to M/B User’s Manual. “Reset SW” Cables. Please refer to M/B User’s Manual. 31.Find “Power SW” and “+P LED” 32.Plug Audio Cables to 33.Find “Case Speaker” from “-P LED” Cables and plug onto M/B.
An important point after buying a device Apevia ATX-B2KL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Apevia ATX-B2KL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Apevia ATX-B2KL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Apevia ATX-B2KL you will learn all the available features of the product, as well as information on its operation. The information that you get Apevia ATX-B2KL will certainly help you make a decision on the purchase.
If you already are a holder of Apevia ATX-B2KL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Apevia ATX-B2KL.
However, one of the most important roles played by the user manual is to help in solving problems with Apevia ATX-B2KL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Apevia ATX-B2KL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
