Instruction/ maintenance manual of the product ATX-B3KL Apevia
Go to page of 6
ATXB3KL/B3KLW Series Installation Guide 1:Unscrew the thumb screws 2.Pull the side panel back then 3:Fi nd the motherboard stand-offs from side panel. pull out. from the enclosed screw box. 4:Put the motherboard stand-offs 5.Sit the motherboard on the 6.
9.Take out front panel: Step (1): Unscrew the side panel Step (2): Take ou t the side Step (3): There are 4 screws attach panel motherboard side. panel (motherboard side) the front panel to the case. Unscrew 2 screws from one side of the case. Step (4): Unscrew the other Step (5): Pull out the front panel 2 screws from the other side.
13.Secure the 5.25” drives 14.S lide in 3.5” FDD Drive and 15.Install 3.5” hidden driv es su ch as in place with screws. secure with scr ews. Hard Disk Drive, Zip Drive. 16.Screw all 3.5” hidden drives 17. Snap in the Front Panel. 18.Audio Cable: Take out the I/O slot in place with screws.
22.Connect case fans by linking 23.Find the 20- pin connector 24.Plug in to your motherboard. together all 4-pin Female an d Male from Power Supply. Differe nt M/B has different layout. connectors of all fans . There will Please refer to your motherboard be 1*Female & 1*Male connectors user’s manual.
31.Find “Power SW” and “+P LED” 32.Plug audio cables to 33.Find “Case Speaker” from “-P LED” cables and plug onto M/B. sound Card or M/B. screw box. Please refer to M/B user manual. 34.Install Case Speaker to M/B 35.LCD Temperature Readou t: Connect 36.
39.After installing th e LCD, 40.Lay your case down an d put “Case Feet” on . the temperature readou t will show up with back ligh t ing when powered on.
An important point after buying a device Apevia ATX-B3KL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Apevia ATX-B3KL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Apevia ATX-B3KL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Apevia ATX-B3KL you will learn all the available features of the product, as well as information on its operation. The information that you get Apevia ATX-B3KL will certainly help you make a decision on the purchase.
If you already are a holder of Apevia ATX-B3KL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Apevia ATX-B3KL.
However, one of the most important roles played by the user manual is to help in solving problems with Apevia ATX-B3KL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Apevia ATX-B3KL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
