Instruction/ maintenance manual of the product CP27 APC
Go to page of 12
990-2366A 04/2006 Broadband PowerShield ® Models: CP16 and CP27 User Manual.
.
1 Chapter 1: General Information The PowerShield ® provi des a power s ource for b roadband te lephony, Fiber-to-the- Home/Prem ise (FTTH/P), and other direct current (DC) equipm ent/appli cations. Safety This manual contains important in structions that should b e followed during installation and maintenance of the APC equipment and b atteries.
2 Specifications General Model Number Input Output Maximum Signal Voltage Maximum Signal Current Battery Type CP16U48 100-240 V 50/60 Hz 1.0 A 48 V 16 W 30 V 5 mA CP27U13 100-240 V 50/60 Hz 1.
3 Chapter 2: Installation Enclosure Installation Install the enclosure in a prot ected area that is free of excessive dust and has a dequate airflow. Do not operate the PowerShield where th e temperature and humidity are outside the s pecified limits.
4 Battery Installation ! " # $ % Battery Cover Release Tabs Red Cable Black Cable Negative Terminal Positive Terminal.
5 Connect Equipment and Power The PowerShield battery charges when it is connected to u tility power. The battery charges fully during the fi rst eight ho urs of norm al operation. Do not expect full battery run capability during this initial charge period.
6 Chapter 3: Operation Status Indicators and Features Front Panel Indicator Description Utility Solid green indicates the unit is on utility power. Solid yellow indicates that utility po wer is not present and the unit is on battery power. Flashing green LED indicates the unit is fast -charging.
7 Alarm Silence Button The audible alarms may be silenced by utilizing the dual function Replace Battery/Alarm Silence LED/button / . Function Button Operation (Press and hold for:) Description Replace Battery- Temporarily Enable/Disable <4 seconds If the alarm has been silenced, the unit will emit one qui ck beep.
8 Chapter 4: Maintenance, Service, Approvals, and Warranty Battery Replacement This unit has an easy t o replace, hot-swappable ba ttery. Replacement is a safe procedure, isolated from electrical hazards. You may leave the unit and conne cted equipment on for this procedure.
9 4. Return the unit by insured, prepaid carrier to the address given to you by Customer Support. Always DISCONNECT THE BATTERY before shipping in compliance with U.S. Department of Transporta tion (DOT) regulations. Contact Information Refer to the APC Web site, www.
10 Limited Warranty American Power Conversion (APC) warrants its p roducts to be free from defects in materials and workmanship for a period of two years from the date of purchas e. It s obligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products.
An important point after buying a device APC CP27 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought APC CP27 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data APC CP27 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, APC CP27 you will learn all the available features of the product, as well as information on its operation. The information that you get APC CP27 will certainly help you make a decision on the purchase.
If you already are a holder of APC CP27, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime APC CP27.
However, one of the most important roles played by the user manual is to help in solving problems with APC CP27. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device APC CP27 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
