Instruction/ maintenance manual of the product KH3229-09/06-V2 Kompernass
Go to page of 20
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www .kompernass.com ID-Nr .: KH3229-09/06-V2 KH3229_UK 04.12.2006 13:35 Uhr Seite 1.
Measuring T ape with Marking Laser KH 3229 Operating instructions KH3229_UK 04.12.2006 13:35 Uhr Seite 2.
KH3229_UK 04.12.2006 13:35 Uhr Seite 3.
KH3229_UK 04.12.2006 13:36 Uhr Seite 4.
- 3 - Measuring T ape with Marking Laser Safety instructions 4 Intended Usage 5 Items supplied 6 Description of the appliance 6 T echnical data 7 Inserting the batteries 7 Using the measuring tape 8 Using the laser 10 Cleaning and Care 15 Disposal 15 Service 17 Importer 18 KH3229_UK 04.
Measuring T ape with Marking Laser KH3229 Safety instructions Injury Hazard! • Do not allow the measuring tape to rewind itself without control. • NEVER leave children unsupervised w ith the measuring tape. The appliance contains a Class 2 laser .
• Do NOT direct the laser beam at strongly reflective material. Reflected laser beams are also dangerous. Intended Usage The Measuring T ape with Marking Laser serves for the measuring of lengths. Additionally , a horizontal or a vertical line can be projected.
Items supplied Measuring T ape with Marking Laser 3 Button batteries LR44 Operating instructions Description of the appliance T rouser clip T ape lock Measuring tape Foot screw V e.
T echnical data Measurement accuracy : Horizontally 0,5 mm / m V ertically 2 mm / 3 m Laser class: II Wave length: 650 nm Batteries : 3x LR44 Button batteries Measuring tape: 7,5 m Inserting the batteries • Open the battery compartment . • Ensure that the tape used to remove the batteries lies under- neath the batteries.
• Insert the batteries into the bat- tery compartment as shown on the battery compartment lid . • Close the battery compartment lid. Using the measuring tape With the measuring tape you can read off measurements of length in the metric system or in the Anglo/ American system.
• Restrain the measuring tape , in that you slide the tape lock downwards. Injury hazard! Never allow the measuring tape to rewind itself without control. • When you want to rewind the measuring tape , hold the end firmly and slide the tape lock upwards.
Using the laser Injury Hazard! • NEVER direct the laser beam at people or animals. NEVER look directly into the laser . The laser can cause serious eye damage. • Do NOT direct the laser beam at strongly reflective material. Reflected laser beams are also dangerous.
• Screw the measuring tape onto the tripod with the tripod thread . • Adjust the tripod to the required height. • Align the Measuring T ape with Marking Laser such that the bub- bles in the spirit levels and lie exactly between the markings.
• Direct the laser line onto the desired wall. If you direct the laser beam in hori- zontal adjustment into a corner , the laser beams on both walls and in the corner are at exactly the same distance from the floor (see Fig.2: 3 Point measurement). Fig.
Fig. 2: 3 Point measurement Fig. 3: V ertical measurement Using the laser without a tripod • Place the Measuring T ape with Marking Laser on the levellest possible surface.
• Press the On/Off switch to activate the laser . • Adjust the Measuring T ape with Marking Laser , with the assistance o f the foot screws , such that the bubbles in the spirit levels and lie exactly between the markings. If you screw out the foot screw a little further , you can project the laser line somewhat higher .
Cleaning and Care • Clean the appliance with a lightly moist cloth. Never use aggressive cleansers. They can damage the surfaces. • Do not permit fluids to permeate into the interior of the appliance. Disposal Do not dispose of the appliance in your normal domestic waste.
Dispose of the appliance through an approved disposal centre or at your community waste facility . Observe the currently applicable re- gulations. In case of doubt, consult your local disposal facility . Disposing of batteries! Batteries must not be disposed of in the household waste.
Service DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG T el.: 0870/787-6177 Fax: 0870/787-6168 e-mail: support.uk@kompernass.com Kompernass Service Ireland c/o Irish Connection 41 Harbour view Howth Co. Dublin T el: 087-99 62 077 Fax: 18398056 e-mail: support.
Importer KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM www .kompernass.com - 18 - KH3229_UK 04.12.2006 13:36 Uhr Seite 18.
An important point after buying a device Kompernass KH3229-09/06-V2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kompernass KH3229-09/06-V2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kompernass KH3229-09/06-V2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kompernass KH3229-09/06-V2 you will learn all the available features of the product, as well as information on its operation. The information that you get Kompernass KH3229-09/06-V2 will certainly help you make a decision on the purchase.
If you already are a holder of Kompernass KH3229-09/06-V2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kompernass KH3229-09/06-V2.
However, one of the most important roles played by the user manual is to help in solving problems with Kompernass KH3229-09/06-V2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kompernass KH3229-09/06-V2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
