Instruction/ maintenance manual of the product 30" KitchenAid
Go to page of 7
30" (76.2 cm) Sealed Burner Gas Freestanding and Slide-in Ranges with self-cleaning thermal/con vection oven Installation Instructions Pa rt No . 9758639 IMPOR T ANT : Read and sa ve these instructions. IMPORT ANT : Installer: Leav e Installation Instructions with the homeowner .
7/8" (2.2 cm) min. required between cabinet opening and door or hinge opening. Gas line opening can be located within this shaded area. 2-1/2" (6.4 cm) 13" (33 cm) max. upper cabinet depth 4" (10.2 cm) min. clearance from both sides of range to side wall or other combustible material.
P anel B The cooktop sides of the slide-in range fit ov er the cutout edge of your countertop. If you ha ve a square finish (flat) countertop and the opening width is 30" (76.2 cm), no counter top preparation is required. Fo rm ed front-edged counter tops: Must have molded edge shav ed flat 1/2" (1.
P anel C If local codes permit, a new AGA/CSA design-cer tified, 4-5 foot (122 -152.4 cm) long, 1/2" (1.3 cm) or 3/4" (1.9 cm) I.D ., flexib le metal appliance connector is recommended for connecting this r ange to the gas supply line. Do Not kink or damage the flexible tubing when moving the range .
If you ha ve a slide-in range , remove the outside screws from rear trim on range. Use screws to attach rear v ent to range. 7. Place the anti-tip brack et template on the floor in the cabinet opening so that the left edge is against cabinet and the top edge is against the rear wall, molding or cabinet.
The cooktop LOW b urner flame should be a steady b lue flame appro ximately 1/4" (0.64 cm) high. It can be adjusted using the adjustment screw in the center of the valv e stem. The valv e stem is located directly underneath the control knob. If the LOW flame needs to be adjusted: a.
30" (76.2 cm) Sealed Burner Gas Freestanding and Slide-in Ranges with self-cleaning thermal/con vection oven Installation Instructions Pa rt No . 9758639 IMPOR T ANT : Read and sa ve these instructions. IMPORT ANT : Installer: Leav e Installation Instructions with the homeowner .
An important point after buying a device KitchenAid 30" (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid 30" yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid 30" - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid 30" you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid 30" will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid 30", but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid 30".
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid 30". Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid 30" along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
