Instruction/ maintenance manual of the product 119.16312800 Kenmore
Go to page of 31
Use & Care Guide Liquid Propane Gas (LPG) Grill Kenmore Model Number: 119.16312800 KmartItem Number: 640-787678-119 • Safety • Assembly • Use and Care • Cooking Guide • Espa_ol, Pg. 30 • Parts and Service Call us first if you have any problem with this product.
Primary Safety Warnings ................................... 1-3 Warranty Information ............................................ 2 Pre-Assembly Instructions .................................... 3 Part Diagram and Lists ...............................
DO NOT lightthis grill without first reading the Lighting Instructions. DO NOT lightthis grill without checking the burner tubes for blockage that could have occurred during shipment.
PART# SB0064 SB0027 FEOI05 SBO005 SB0085 SBO016 SEOI23D-O02 BO6WIB-6-C7 SEO007 FE0014N SE9049D-O01 BO6WIB-6-C5 SBOll4 PART DESCRIPTION QTY PURPOSE OF PART Phillips Head Bolt,M6x35mm 4PCS Attaches Cabinet Front Crossbar Phillips Head Bolt,M6xl6mm Install Casters, Attaches Firebox Assembly, Side 24PCS Burner Assembly and Side Shelf Assembly M6xl.
Phillips Head Bolt M6x35mm Qty: 4 Part # SB0064 Phillips Head Bolt M6x16mm Qty : 24 Part# SB0027 Plastic Washer M6xl.0T Qty: 4 Part # FE0105 © Lock Washer M6 Qty: 8 Part # SB0005 © "S"- Ho.
.
KEY DESCRIPTION PART# QTY A Hood Assembly AI Hood Left Side Panel CAOO44-L 1 A2 Hood Right Side Panel CA0044-R 1 A3 Thermometer Seat CA0045D-002 1 A4 Thermometer SE0076 1 A5 Hood Bolt B06W1B-6-A5 2 A6.
KEY DESCRIPTION PART# QTY B19 Main Burner Electrode B06W1B-6-B10 4 B20 Firebox Bottom Panel B06WlB-28-B20 1 B21 Grease Tray SA0647-3 1 B22 Cotter Pin SE9049D-001 2 B23 Grease Cup Bracket SE0147 1 B24 .
KEY DESCRIPTION PART# QTY C15 Cabinet Door Handle B06W1B-6-C15 2 C16 Manual Igniter Stick SE0159D-001 1 C17 Condiment Basket SE9027 1 C18 Locking Standard Caster B06W1B-6-C18 1 C19 Standard Caster B06.
H Remove Firebox from Cabinet [] Unscrew and discard the 6 Phillips Head Bolts and Washers from the corner holes of the cabinet. Remove the crossbar, [] Carefully lift the cabinet up from the firebox and set on cardboard. Remove all foam packing from cabinet.
Install Cabinet Front Crossbar and Door Top Brackets [] Attach the Cabinet Front Crossbar to the Cabinet using 4 Phillips Head Bolts (M6x35mm) and 4 Lock Washers (M6), [] Attach Door Top Brackets labeled L and R to the Cabinet using 4 Phillips Head Bolts (M4x8mm).
Hang Condiment Basket and attach Cabinet Door Stop [] Hang Condiment Basket on the inside of cabinet Right Door, See Inset 1. [] Attach the Cabinet Door Stop to the front of cabinet bottom using 2 Phillips Head Bolts (M4x8mm), See Inset 2.
Attach Fireboxto Cabinet [] Place the firebox onto the cabinet frame with regulator hose and side burner ignition wire hanging inside of the cabinet, We recommend using 2 people to lift the firebox. [] Line up the holes and attach the firebox to the cabinet frame using 4 Phillips Head Bolts (M6x16mm) and 4 Washers (M6x!.
Install Towel Bar Handles, Utensil Hooks, Side Panels [] Use 2 Phillips Head Bolts (M4X8mm), 2 Lock Washers (M4), and 2 Washers (M4) to attach a Towel Bar to the side burner frame. Use 3 Phillips Head Bolts (M4X8mm) and 3 Lock Washers (M4) to attach the Side Burner Control Panel to the side burner frame.
Install Side Burner Valve [] Detach side burner ignition wire from the regulator hose if they are taped together. [] Insert the side burner valve stem up through the hole in the Side Burner Control Panel. See Inset 1. [] Center the side burner valve in the side burner tube, See Inset 2.
_1_ Attach Side Burner Control Knob and Side Burner Ignition Wire [] Slide the side burner ignition wire through the hole located in the lower left front corner of the Firebox Assembly and over the side burner igniter connector. See Insets 1 and 2. [] Push the Control Knob onto the valve stem.
Install the Heat Diffuser, Cooking Grates, Warming Rack [] Place the Heat Diffuser into the firebox between the ridges in the front and back panels. See Inset 1. [] Place the Cooking Grates into the firebox. The grate bottoms have a small knob on each corner.
Install Battery [] Unscrew the electronic igniter cap. Place the "AA" Battery into the igniter with the positive (+) end up. Screw the electronic igniter cap back into place. Battery (Size AA) qty: 1 Congratulations - Assembly is now complete! [] Remove any additional labels or packing material from the grill except the CSA label.
CORRECT LP GAS TANK USE • LP gas grill models are designed for use with a standard 20lb. (9.1kg) Liquid Propane Gas (LP Gas) tank, which is not included with the grill.
Notes about LP Gas Tank Exchange Programs • Many retailers that sell grills offer you the option of replacing your empty LP gas tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, test and certify their tanks.
Flow Limiting Valves on LP Gas Tanks Your LP gas tank is equipped with a flow limiting valve that will restrict the flow of gas due to a sudden change in pressure.
I,_.t :IF__I _ I D][or__l :| din 4_ [,,.i II :| I.[q IIn (o] _ [,: Grill Lighting Instructions I. Before each use, check all hoses for cracks, nicks, cuts, or abrasions. If a hose is damaged in any way, do not use your grill before replacing the hose with an authorized part from the Parts List.
MANUALLY LIGHTING THE BURNERS WITH THE MATCH HOLDER 1. Open the lid. 2. Ensure all burners are in the "OFF" position. 3. Slowly turn on the gas at the LP cylinder valve if it is not already on. 4. Place a match in the match light stick, This is located inside the left cabinet door.
Troubleshooting If the grill fails to light: 1. Turn gas off at source and turn control knobs to "OFF". Wait at least 5 minutes for gas to clear, and then retry 2.
Proper care and maintenance will keep your grill in good operating condition and prolong its life. Follow these cleaning procedures on a timely basis and your grill will stay clean and operate with minimum effort. CAUTION: Be sure your grill is off and cool before cleaning, and always wear protective gloves when cleaning your grill 9.
To reduce the chance of FLASHBACK FIRE you must clean the burner tubes as follows periodically in summer and fall, wherever spiders are active in your area, and if your grill has not been used for an extended period of time. 1. Turn all burner control knobs to the "OFF" position.
Burn-Off Some of the new parts of your grill could have residual oils, We recommend you ignite the burners, turn to "Hi", and lower the lid for 3 to 5 minutes to burn any oils off before grilling for the first time.
Question: can I convert my gas grill from one fuel type to another, such as LP to NG (natural gas) or vice versa? Answer: No, your gas grill is manufactured to specific standards developed by CSA and ANSI for your safety and is certified for one type of gas only.
Question: Where do I use my grill for safer operation and better performance? Answer: Strong winds and low temperatures can affect the heating and performance of your gas grill so factor in these elements when positioning your grill outdoors for cooking.
Congratulations on making a smart purchase. Your new Kenmore (_ product is designed and manufactured foryears of dependable operation. But like all products, it may require repair fromtime to time.That's when having a Repair Protection Agreement can save you money and aggravation.
Your Home ccc;_ For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
An important point after buying a device Kenmore 119.16312800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 119.16312800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 119.16312800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 119.16312800 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 119.16312800 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 119.16312800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 119.16312800.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 119.16312800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 119.16312800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
