Instruction/ maintenance manual of the product 119.163018 Kenmore
Go to page of 31
Use & Care Guide Liquid Propane Gas (LPG) Grill ® Kenmore Model Number: 119.16301800 KmartItem Number: 640-810979-112 • Safety • Assembly • Use and Care • Cooking Guide • Espa_ol, Pg. 30 • Parts and Service Call us first if you have any problem with this product.
Primary Safety Warnings ................................... 1-3 Warranty Information ............................................ 2 Pre-Assembly Instructions .................................... 3 Part Diagram and Lists ...............................
DO NOT lightthis grill without first reading the Lighting Instructions. DO NOT lightthis grill without checking the burner tubes for blockage that could have occurred during shipment.
PART# SB0064 SB0027 FEOI05 SBO005 SB0085 SBO016 SEOI23D-O02 BO6WIB-6-C7 SEO007 FE0014N SE9049D-O01 BO6WIB-6-C5 SBOll4 PART DESCRIPTION QTY PURPOSE OF PART Phillips Head Bolt,M6x35mm 4PCS Attaches Cabinet Front Crossbar Phillips Head Bolt,M6xl6mm Install Casters, Attaches Firebox Assembly, Side 24PCS Burner Assembly and Side Shelf Assembly M6xl.
Phillips Head Bolt M6x35mm Qty: 4 Part # SB0064 Plastic Washer M6xl,0T Qty: 4 Part # FE0105 "S"- Hook Qty: 3 Part # SE0123D-002 Phillips Head Bolt M6x16mm Qty: 24 Part# SB0027 Lock Washer M6.
.
KEY DESCRIPTION PART# QTY A Hood Assembly AI Hood LeftSide Panel CAOO44-L 1 A2 Hood Right Side Panel CA0044-R 1 A3 Thermometer Seat CA0045D-002 1 A4 Thermometer SE0076 1 A5 Hood Bolt B06WlB-6-A5 2 A6 .
KEY DESCRIPTION PART# QTY B19 Main Burner Control Panel B070E4-R-B19 1 B20 Control Knob Seat B06W1B-6-B20 3 B21 Control Knob FE0090D-001 3 B22 Electronic Igniter Button SE0131- A 1 B23 Electronic Igni.
KEY DESCRIPTION PART# QTY D4 Side Burner Stopper SB0045D-001 2 D5 Side Burner Inner Frame B06WIB-6-D5 1 D6 Towel Bar Handle B06WlB-6-D6 1 D7 Side Burner Outer Frame Assembly B070E4-D7 1 D8 Side Burner.
!! Remove Firebox from Cabinet [] Unscrew and discard the 6 Phillips Head Bolts and Washers from the corner holes of the cabinet. Remove the crossbar. [] Carefully lift the cabinet up from the firebox and set on cardboard. Remove all foam packing from cabinet.
N nstall Cabinet Front Crossbar and Door Top Brackets [] Attach the Cabinet Front Crossbar to the Cabinet using 4 Phillips Head Bolts (M6x35mm) and 4 Lock Washers (M6), [] Attach Door Top Brackets lab.
Hang Condiment Basket and attach Cabinet Door Stop [] Hang Condiment Basket on the inside of cabinet Right Door, See Inset 1. [] Attach the Cabinet Door Stop to the front of cabinet bottom using 2 Phillips Head Bolts (M4x8mm), See Inset 2.
Cotter Pin qty: 2 Install Grease Tray, Grease Cup Bracket and Grease Cup [] Insert the Grease Tray along two sides of the firebox from the back underneath the firebox, See Inset 1 [] Attach the Grease.
install Side Burner Frame to Firebox. [] Unscrew the 2 Phillips Head bolts ¼" from the upper left and right corner holes in the left side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side burner frame.
Attach Side Burner Control Panel to Hain Control Panel [] Use 2 Phillips Head Bolts (M4x8mm) and 2 Lock Washers (M4) to attach the Side Burner Control Panel to the firebox as shown.
Install Side Shelf Frame to Firebox. [] Unscrew the 2 Phillips Head bolts 1/4" from the upper left and right corner holes in the right side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side shelf frame.
/_ Place and Secure LP Cylinder into the Cabinet [] Hook the ends of the Cylinder Support Ring into the two holes in the left front and rear legs. See Inset 1, [] Place the LP cylinder down into the tank support hole in the bottom of the cabinet. Ensure the valve faces to the front.
_1_ Congratulations - Assembly is now complete! [] Remove any additional labels or packing material from the grill except the CSA label. Be sure to clean all foam packing material out of all areas. [] Please proceed to and read the remaining sections of the Use & Care Guide prior to hooking up your LP cylinder or operating your grill.
CORRECT LP GAS TANK USE • LP gas grill models are designed for use with a standard 20lb. (9.1kg) Liquid Propane Gas (LP Gas) tank, which is not included with the grill.
Notes about LP Gas Tank Exchange Programs • Many retailers that sell grills offer you the option of replacing your empty LP gas tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, test and certify their tanks.
Flow Limiting Valves on LP Gas Tanks Your LP gas tank is equipped with a flow limiting valve that will restrict the flow of gas due to a sudden change in pressure.
I,_.t :IF__I _ I D][or__l :| din | _ [,,.i II :| I[q IIn (o] _ [,: Grill Lighting Instructions I Before each use, check all hoses for cracks, nicks, cuts, or abrasions. If a hose is damaged in any way, do not use your grill before replacing the hose with an authorized part from the Parts List.
MANUALLY LIGHTING THE BURNERS WITH THE MATCH HOLDER 1. Open the lid. 2. Ensure all burners are in the "OFF" position. 3. Slowly turn on the gas at the LP cylinder valve if it is not already on. 4. Place a match in the match light stick. This is located inside the left cabinet door.
Troubleshooting If the grill fails to light: 1. Turn gas off at source and turn control knobs to "OFF". Wait at least 5 minutes for gas to clear, and then retry 2.
Proper care and maintenance will keep your grill in good operating condition and prolong its life. Follow these cleaning procedures on a timely basis and your grill will stay clean and operate with minimum effort.
To reduce the chance of FLASHBACK FIRE you must clean the burner tubes as follows periodically in summer and fall, wherever spiders are active in your area, and if your grill has not been used for an extended period of time. 1. Turn all burner control knobs to the "OFF" position.
Burn-Off Some of the new parts of your grill could have residual oils, We recommend you ignite the burners, turn to "Hi", and lower the lid for 3 to 5 minutes to burn any oils off before grilling for the first time.
Question: can I convert my gas grill from one fuel type to another, such as LP to NG (natural gas) or vice versa? Answer: No, your gas grill is manufactured to specific standards developed by CSA and ANSI for your safety and is certified for one type of gas only.
Question: Where do I use my grill for safer operation and better performance? Answer: Strong winds and low temperatures can affect the heating and performance of your gas grill so factor in these elements when positioning your grill outdoors for cooking.
Congratulations on making a smart purchase. Your new Kenmore (_ product is designed and manufactured foryears of dependable operation. But like all products, it may require repair fromtime to time.That's when having a Repair Protection Agreement can save you money and aggravation.
Your Home ccc;_ For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
An important point after buying a device Kenmore 119.163018 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 119.163018 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 119.163018 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 119.163018 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 119.163018 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 119.163018, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 119.163018.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 119.163018. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 119.163018 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
