Instruction/ maintenance manual of the product KTD60M Kelvinator
Go to page of 8
INSTRUCTIONS FOR USE TUMBLE DRYERS KTD60W KTD60M KTD600M IMPORTANT PLEASE READ THESE INSTRUCTIONS THOR OU GHLY BEFORE USING THIS APPLI ANCE. KEEP THEM IN A SAFE PLAC E FOR FUTURE REFERENCE.
INSTALLATION Position the tumble dryer so that the plug remains acces sible after installation. Do not block the vent at the front or base of the dryer, as this will impair th e working of the machine.
THE CONTROLS A. THE TIMER Select the required drying ti me based on the recommendatio ns on the control panel. B. HEAT SWITCH(ES) Select the required heat setting based on the recommendations on the control panel. C. START BUTTON (IF FITTED) Press Start button after closing the door and selecting the required drying time.
OPERATION Open the door. Load clothes loosely into the drum. Load sheets first, starting with one corner. Close the door. Dry your hands. Check that the timer is in the ‘0’position. Plug in the machine. Select correct heat position, (see programme chart on control panel for recommendations).
If your machine does not work check the fo llowing before calling a service engineer:- - Check that there is a supply of electricity. - Check that the door has been properly closed and th e machine is switched on (start button pressed, if fitted). - Check the fuse in the moulded plug.
IMPORTANT USER INFORMATION –Under no circumstances should anything other than th e recommended articles be placed in the tumble dryer. –The tumble dryer should be serviced by an appoint ed service organisation a nd only genuine parts used. –It is dangerous to alter or modify the product in any way other than fittin g authorized accessories.
Open the door. Undo screw (A) remove switch stri ke (B) and replace screw , Remove screws (C) and latch plate (D). Remove hinge block s crews (E). Remove door hinge from blocks. Remove hinge screws (F) and hinge (G) and re fit to oppositeside as shown below Re fit latch plate (D) with screws (C).
Manufactured by: Crosslee plc. Hipperholme, Halifax, West York shire H X3 8DE 4213 094 98515.
An important point after buying a device Kelvinator KTD60M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kelvinator KTD60M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kelvinator KTD60M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kelvinator KTD60M you will learn all the available features of the product, as well as information on its operation. The information that you get Kelvinator KTD60M will certainly help you make a decision on the purchase.
If you already are a holder of Kelvinator KTD60M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kelvinator KTD60M.
However, one of the most important roles played by the user manual is to help in solving problems with Kelvinator KTD60M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kelvinator KTD60M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
