Instruction/ maintenance manual of the product 3C12066 3Com
Go to page of 2
How To Install And Use The Coaxial Transce iver Module 3C12066 1 Interworkin g Informatio n The 3Com ® LinkBuild er ® Coaxial Transce iver Module has bee n designe d to the IEEE 802.3 specification. The Transceiver Module can transmit and rec eive Ether net 10 M bit/sec traffic over thin Ether net cable.
SQE Tes t The SQE Test function should be enabled or disabled depe nding on the application. The function must be disabled f or operation when insta lled in a Repeate r. The f unction should be enabled f or operation whe n connecte d to a LinkBuilder ECS Local Bridge Module 3 C12050/1.
An important point after buying a device 3Com 3C12066 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3Com 3C12066 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3Com 3C12066 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3Com 3C12066 you will learn all the available features of the product, as well as information on its operation. The information that you get 3Com 3C12066 will certainly help you make a decision on the purchase.
If you already are a holder of 3Com 3C12066, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3Com 3C12066.
However, one of the most important roles played by the user manual is to help in solving problems with 3Com 3C12066. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3Com 3C12066 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
