Instruction/ maintenance manual of the product 3C12063 3Com
Go to page of 2
How To Install And Use The TP Transceiver Interface Module 3C12063 1 Interworkin g Informatio n The 3Com ® LinkBuild er ® TP Transce iver Interf ace Module ha s been designed to the IEEE 802.3 1 0BaseT specification. The Transceiver Module can transmit and rec eive Ether net 10 M bit/sec traffic over Shielde d or Unshielded Twisted Pa ir cable.
SQE Tes t The PL1 component allows you to enable or disable the SQE Test. The SQE Test is used by 802.3 transc eive rs to confirm that the transceiver is functioning correctly. The func tion must be disabled for operation when installed in a Repeater.
An important point after buying a device 3Com 3C12063 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3Com 3C12063 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3Com 3C12063 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3Com 3C12063 you will learn all the available features of the product, as well as information on its operation. The information that you get 3Com 3C12063 will certainly help you make a decision on the purchase.
If you already are a holder of 3Com 3C12063, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3Com 3C12063.
However, one of the most important roles played by the user manual is to help in solving problems with 3Com 3C12063. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3Com 3C12063 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
