Instruction/ maintenance manual of the product 3C12065 3Com
Go to page of 2
How To Install And Use The Fiber Opt ic Transceiver Module 3C12 065 1 Interworkin g Informatio n The 3Com ® Fiber Optic Transc eiver Module has be en designed to the IEEE 802.3 FOIRL standards and uses ST type connectors. The Transceiver Module can transmit (Tx) and rece ive (Rx) Ethe rnet 10 Mbps traffic over Fiber Optic cable.
Preparat ion Before you insta ll the Transc eiver Module, you must remove the module, hub or repeater from the network and all power sources. Module s must be removed from the Chassis (you do not need to power down the chassis) . The 3C18146 Expansion Module must be separated from its mother module.
An important point after buying a device 3Com 3C12065 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3Com 3C12065 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3Com 3C12065 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3Com 3C12065 you will learn all the available features of the product, as well as information on its operation. The information that you get 3Com 3C12065 will certainly help you make a decision on the purchase.
If you already are a holder of 3Com 3C12065, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3Com 3C12065.
However, one of the most important roles played by the user manual is to help in solving problems with 3Com 3C12065. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3Com 3C12065 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
